Fifine H6 Gaming Headset

Product Overview

The Fifine H6 is a gaming headset designed to provide immersive audio and clear communication for gamers. It features a comfortable design, high-quality sound, and a detachable microphone.

Package Contents

• Fifine H6 Gaming Headset
• Detachable Microphone
• 3.5mm TRRS to Dual 3.5mm TRS Cable
• User Manual

Features

• Immersive Audio: 50mm drivers deliver rich soundscapes for gaming.
• Detachable Microphone: Flexible and detachable boom mic for clear voice chat.
• Comfortable Design: Plush earcups and adjustable headband for extended wear.
• Multi-Platform Compatibility: Works with PC, PS4, PS5, Xbox One, Nintendo Switch, and mobile devices via 3.5mm jack.
• In-line Controls: Volume dial and mute switch for easy access.

Setup and Connection

Connecting to PC

For PC use, connect the 3.5mm TRRS plug to the headset's microphone/headphone jack. If your PC has separate microphone and headphone jacks, use the included splitter cable (3.5mm TRRS to Dual 3.5mm TRS). Connect the green plug to the headphone jack and the pink plug to the microphone jack.

Diagram: Shows the headset being plugged into a PC's combined audio jack, and then a separate diagram showing the splitter cable connecting to separate headphone and microphone ports on a PC.

Connecting to Consoles (PS4, PS5, Xbox One)

Connect the 3.5mm TRRS plug directly to the controller's 3.5mm audio jack. For older Xbox One controllers without a 3.5mm jack, an adapter (sold separately) may be required.

Diagram: Shows the headset being plugged into a game controller's 3.5mm jack.

Connecting to Nintendo Switch

Connect the 3.5mm TRRS plug directly to the Nintendo Switch's 3.5mm audio jack.

Diagram: Shows the headset being plugged into a Nintendo Switch's 3.5mm jack.

Connecting to Mobile Devices

Connect the 3.5mm TRRS plug directly to the mobile device's 3.5mm audio jack.

Diagram: Shows the headset being plugged into a smartphone's 3.5mm jack.

Using the Microphone

Attach the detachable microphone to the designated port on the headset. Adjust the microphone boom to a comfortable position near your mouth. Use the in-line mute switch to turn the microphone on or off.

Diagram: Shows the microphone being attached to the headset and positioned near the user's mouth. An illustration of the in-line control with a mute button is also shown.

In-line Controls

The headset features an in-line control module for easy adjustments:

• Volume Dial: Rotate to adjust the headset volume.
• Microphone Mute Switch: Slide to mute or unmute the microphone.

Diagram: Close-up illustration of the in-line control with a volume wheel and a toggle switch labeled 'Mute'.

Troubleshooting

• No Sound: Ensure the headset is properly connected. Check the volume levels on your device and the in-line control. Make sure the headset is selected as the audio output device in your system settings.
• Microphone Not Working: Verify the microphone is securely attached. Check that the microphone is not muted using the in-line switch. Ensure the microphone is selected as the input device in your system settings.
• Poor Sound Quality: Try connecting to a different device to rule out device-specific issues. Ensure all cables are fully inserted.

Specifications

• Driver Diameter: 50mm
• Frequency Response: 20Hz - 20kHz
• Impedance: 32Ω ± 15%
• Sensitivity: 103dB ± 3dB
• Microphone Sensitivity: -42dB ± 3dB
• Microphone Impedance: 2.2kΩ
• Cable Length: 2.2m
• Connector: 3.5mm TRRS

Warranty Information

Every Fifine product comes with a Limited Warranty that in normal use of the product will be free of any defects in material or workmanship for a period of one year from the date of purchase. For detailed warranty information, please visit the Fifine website.