Smartwatch X8 MAX

Introduction and Compatibility

Firstly, it is important to note that for Android cell phones, Android 4.2 or higher operating system is required. For Apple cell phones, iOS 8.0 or higher is required. Likewise, your cell phone needs to support Bluetooth BT4.0.

Secondly, before the first time use, please make sure that the watch has enough charge. If the device cannot power on, please charge it first.

Download the APP

Next step, download the APP.

Android download method:

Search for "HryFine" on Android Google Play to download the app or scan the QR code to download.

[QR code for Android download]

iOS download method:

Scan the QR code to download the app.

[QR code for iOS download]

To pair your watch to your cell phone:

• Press and hold the power button to turn on. Please make sure the Bluetooth on the cell phone is turned on (on Android, you have to turn on the GPS).
• Open the "HryFine" app on the cell phone, navigate to "My Device" to match the watch. Select the MAC address matching your watch to connect. If you can't find the device, you can click the device list on the top right corner to refresh and search.
• When the APP successfully connects to the watch, a guide page will appear. According to the guide page, enter the Bluetooth search pairing "Hry 3.0 Bluetooth". After the connection is successful, you can make/receive calls and play Bluetooth music (on Android, automatic pairing 3.0).

Smartwatch Operating Instructions

• Power button: Turns the screen off/on, and can also return to the clock interface from other app interfaces.
• Clock interface: The watch automatically syncs to the phone's date and time after connecting to the APP. Press and hold the clock screen for 2 seconds to switch between different dialing interfaces.
• Phone dialing: When Bluetooth 3.0 is connected, you can make a call by dialing the number. The phone will dial automatically. The phone can set the calling device as a wristband. Phonebook: After the wristband is successfully connected to the APP, you can add up to 50 frequently used contacts in the APP. After contacts are added, the wristband phonebook will be displayed synchronously. The wristband can click contacts in the phonebook to make calls (the phone must be connected to Hry3.0).
• Call log: Keeps a record of the calls made by the watch.
• Information: Saves messages received on the cell phone; you can view the last 8 messages.
• Sports mode:
  • 1. Records distance traveled and calorie consumption in running mode.
  • 2. Records calorie consumption in jumping mode.
  • 3. Records calorie consumption in running mode.
  • 4. Records distance cycled and calorie consumption in bicycle mode.
  • 5. Records calorie consumption in swimming mode.
  • 6. Pedometer record: Displays step count, completion status, distance traveled, and calories for the day.
• Sleep detection: Wear the watch while sleeping. It records sleep duration, deep sleep, light sleep, and wake time. You can view your sleep data details on the APP and set the sleep detection time interval.
• Sedentary reminder: Set the function period and effective time range for sedentary reminders. The sedentary switch needs to be set in the APP.
• Heart rate measurement: After selecting the heart rate function, it automatically measures and displays the heart rate data. Data is uploaded to the APP. Note: The wristband must be compatible with the heart rate sensor.
• Blood pressure measurement: After selecting blood pressure, it automatically measures and displays the blood pressure data.
• Blood oxygen measurement: After selecting blood oxygen, it automatically measures and displays the blood oxygen data.
• Remote camera: Connect to the APP, open the remote camera function. Shake the watch to take a picture. Exiting the remote camera function also exits the mobile camera.
• Stopwatch: Function to start and stop the time stopwatch.
• Search cell phone: When connected to the application, enter the cell phone search function. Press the icon, and the phone will send a ringtone reminder. [Search icon]
• Flashlight: Turns on the flashlight function; the clock display will be bright white.
• Device information: Displays the MAC serial number and version number of the device.
• Brightness adjustment: Adjust the display brightness. You can choose from 5 brightness levels.
• Alarm: Connected to the APP, you can add reminder alarms and sync them to the watch. You can add up to 5 alarms.
• Bluetooth Music: Can only be used when connected to a Bluetooth 3.0 phone. You can control music playback (play/pause) on the cell phone via Bluetooth.
• Theme: After login, slide up and down to select different clock themes.
• QR Code: Displays the QR code to scan and download the APP from the device. [QR code icon]
• Personal information: Set your avatar, nickname, gender, age, height, and weight. Set a target number of steps for daily completion.
• Device search: When the watch is connected, click the search device function, and the watch will vibrate. [Search icon]
• Message reminder: Set which cell phone messages the watch will notify you about, such as QQ, WeChat, Weibo, Whatsapp, mail, and incoming calls. This requires the cell phone system to authorize the APP to obtain notification permission.
• Alarm reminder: Set alarm reminder times. After setting, it syncs to the watch, providing a vibration reminder even if disconnected from the APP. The watch saves APP settings for signal reminders.
• Sedentary reminder: Enable the sedentary function and set the reminder duration and time range. After successful setting, it syncs to the watch, providing a vibration reminder at the set time.
• Remote timer: With the watch linked to the cell phone, enter the APP remote camera interface. Shake or rotate the wristband to take photos automatically after 3 seconds. Authorize the APP to access the album to save selfie photos.
• Sleep detection: When connected to the watch via the app, you can set sleep detection time, sleep heart rate detection auxiliary switch, and other detection functions.
• Automatic heart rate measurement: When the watch is connected, set the time point for automatic heart rate measurement. After setting, it automatically synchronizes with the watch. During wear, your heart rate data is automatically detected and transmitted to the APP for saving.
• Do not disturb mode: Enable this mode to set a time period during which the watch will stop receiving notification messages.
• Vibration: Enable/disable the vibration reminder function. After deactivating, the watch will not vibrate.
• Language setting: Set the language supported by the watch. Once completed, the watch automatically switches to the selected language.
• Wearing mode: Select left/right wearing mode to adjust heart rate, pedometer, and other data algorithms according to your wearing style.
• Synchronize system time: Manually synchronize the phone's time to the watch.
• Factory reset: Access this function to restore factory defaults and erase all data.
• Raise hand to illuminate the screen: When activated, if the wristband is in screen sleep state, raising your wrist illuminates the screen. Lowering your hand turns the screen off.

Precautions

• Should not be worn while bathing or swimming.
• When synchronizing data, ensure the watch is correctly paired and do not disconnect it.
• Use the included charging cable for charging.
• Do not expose the watch to high humidity, extremely high or low temperatures for extended periods.
• If the watch restarts unexpectedly, check the phone's memory information, clear it if necessary, or close and reopen the APP.

Maintenance of the watch

• Do not scratch the sensor; protect it from damage.
• Clean the watch surface with a damp cloth and mild soapy water to remove oil or dust.
• Do not expose the watch to environments with strong chemicals like gasoline, cleaning solvents, propanol, alcohol, or insect repellent, as these can damage water resistance and the case surface.
• Avoid strong impacts and extreme exposure to high temperatures.
• As long as the lens and case are intact, the watch is water resistant. Violent disassembly will affect water resistance.

Common problems

What should I do if I can't connect Bluetooth (Connection error / reconnection or slow connection / reconnection)?

Answers:

1. Please confirm if the cell phone is compatible (iOS 8.0 or Android 4.4 or higher, Bluetooth 4.0 cell phones or tablets).
2. Due to signal interference in Bluetooth wireless connection, connection times may vary. If you cannot connect for a long time, ensure you are in a place with no magnetic field or minimal interference from other Bluetooth devices.
3. Turn off the Bluetooth on the phone and turn it on again.
4. Delete the application from the phone or restart the phone.
5. Do not connect your phone to other similar products (other smart wristbands) at the same time.

The APP is still running in the background and cannot connect, the watch is not displayed.

Answer: If the Bluetooth signal from the watch is not displayed on the cell phone, please ensure the watch is turned on and activated, and not connected to other cell phones. Move the watch closer to the cell phone and search again. If it still does not show up, turn off the Bluetooth on the cell phone for 20 seconds, restart Bluetooth, and search again.

Should the Bluetooth connection always be on and will there be data if it is closed?

Answer: Before synchronizing data, exercise and sleep data are saved on the wristband device. When the cell phone and watch are successfully connected via Bluetooth, the watch automatically uploads data to the cell phone. Note that data storage on the watch is limited, holding approximately one week of data. When storage is full, the oldest data is automatically overwritten.

Remarks: If you enable incoming call and SMS reminder functions, Bluetooth must remain connected. Only alarm reminders are supported offline.

What should I do if the watch cannot be charged?

Answer:

1. Please confirm that the charging cradle is placed correctly and the charging clip makes good contact with the watch.
2. When the watch's power is lower than 3.6V, there will be a period of battery pre-charging time.

Remarks: After plugging in the charger, the device will immediately enter the charging state. If the display is off, it may take 3 to 5 minutes to show the charging status.

Can wearing the watch for a long time cause harm to the human body?

Answer: No, the radiation from the equipment is lower than the US FCC standard and is basically negligible.