Niko Home Control 'Leave Home' Button with LED and Comfort Sensors, Champagne Coated

Product Overview

This single-button actuator with the 'Leave Home' symbol can be configured to control a variety of actions and routines within a Niko Home Control II installation with bus cabling. It features a programmable LED for inverted feedback on executed actions and can serve as a orientation light when LEDs are activated. The integrated temperature and humidity sensors enable multi-zone climate and ventilation control, enhancing energy efficiency and overall comfort.

• The versatile temperature sensor can be used to control a heating/cooling zone within a Niko Home Control II installation, function as a simple thermometer, or create specific conditions (e.g., for blind control).
• The humidity sensor can also be used in routines for automatic ventilation control in bathrooms or toilets.
• The button features a simple click mechanism for wall mounting of bus cabling controls and is available in all Niko finishes.

Technical Data

Single-button actuator with LED and comfort sensors for Niko Home Control, 'Leave Home' symbol, champagne coated.

• Function: Combine the button's temperature sensor with a heating or cooling module for multi-zone control, or with a switching module for electric heating. Combine the integrated humidity sensor with a ventilation module for automatic ventilation control. Setpoints and weekly programs are managed via the app. Calibration is controlled via the programming software.
• Maximum number of push buttons configurable as temperature sensors per installation: 20.
• Temperature sensor range: 0 – 40°C.
• Temperature sensor accuracy: ± 0.5°C.
• Humidity sensor range: 0 - 100% relative humidity (non-condensing, no icing).
• Humidity sensor accuracy: ± 5%, 20 – 80% relative humidity at 25°C.
• Cover material: The cover is made of dimensionally stable polycarbonate and ASA materials and is lacquered.
• Imprint: Leave Home.
• Lens: The button of the actuator is equipped with a small amber LED light (1.5 x 1.5 mm) at the bottom to indicate the status of the action.
• Color: Champagne lacquered (approx. NCS S 4005 - Y20R, RAL 080 70 10).
• Fire safety: The plastic parts of the cover are self-extinguishing (withstand a glow-wire test of 650°C). The plastic parts of the cover are halogen-free.
• Input voltage: 26 Vdc (SELV, Safety Extra Low Voltage).
• Disassembly: The cover can be easily removed by pulling it off the base.
• Protection rating: IP20.
• Protection rating: IP40 for the combination of a mechanism and a front plate.
• Impact resistance: After mounting, an impact resistance according to IK06 is guaranteed.
• Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm.
• Marking: CE.

For more information, visit www.niko.eu.