ECL1-240026A 3-in-1 Magnetic Wireless Charging Stand

Specifications

Product Model: ECL1-240026A

Type-C Input: 9V/3A

Output:

• iPhone (15W/10W/7.5W/5W max)
• AirPods (5W max)
• Apple Watch (2.5W max)

Dimensions: L2.56" * H6.3" (L65mm*H160mm)

Weight: 6.2 oz (175 g)

Transmission Distance: 1.97 in (5 mm)

Charging Cable Included: 3 ft USB-A to Type-C Cable

Features

1. Multi-functional fast wireless charging for compatible phones, AirPods, and Apple Watch. Capable of charging 3 devices simultaneously. The charger automatically identifies the connected device and charges at the maximum supported wireless charging speed.
2. Requires a separate 20W+ adapter (not included) to power the charging base for optimal charging speed.
3. Features a convenient design with hidden charging cables for AirPods and Apple Watch within the casing, promoting a distraction-free workspace.
4. The mobile phone wireless charging coil is positioned away from the device's heat source to enhance charging efficiency. It supports wireless charging in both upright and landscape orientations, maintaining the same charging speed.
5. Designed specifically for AirPods and Apple Watch. The base is compatible with both new and older models of AirPods and allows for easy use of the watch while it is mounted on the charger.
6. Includes built-in magnetic isolation for the wireless charging coil, improving the effectiveness of magnetic attachment. The electronic circuit is equipped with comprehensive safety features: over-voltage protection, input over-current protection, output over-current protection, anti-ripple, short circuit protection, anti-electromagnetic protection, and anti-static protection for safe charging.

How to Use

1. Connect the power supply; the indicator light will turn red.
2. During charging, the indicator light will remain blue.
3. If metal foreign objects are detected in the wireless charging area or other errors occur, the red and blue lights will flash simultaneously.

Diagram Description: The diagram illustrates the charging stand with labels pointing to the 'Multi-Purpose Wireless Charging Pad', 'Type C Port', 'Apple Watch Charging Pad', and 'Phone Wireless Charging Pad'.

FCC Compliance and Disclaimer

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

FCC ID: 2A3ZO-24006A