PRO-LINK+ Bundle 25.3 Coverage Enhancements

For Light, Medium and Heavy-Duty Trucks

Comprehensive truck diagnostic capabilities are now easier than ever. Snap-on offers the new PRO-LINK+, and for the first time, all light, medium, and heavy-duty truck software is bundled together for existing PRO-LINK Edge Customers. This presents an opportunity to discuss software upgrades or the PRO-LINK+ with Edge customers. Upgrading software or platforms ensures technicians accurately diagnose issues on more makes and systems with new capabilities and stay current with the latest vehicles.

Bundle 25.3 for PRO-LINK Edge includes all twelve of the previously available software titles:

Light and Medium Truck Suite - NEW COVERAGE
Cummins Engines - NEW COVERAGE
Detroit Diesel Suite - NEW COVERAGE
Allison Transmission Suite - NEW COVERAGE
ABS Brakes Suite - NEW COVERAGE
Volvo / Mack - NEW COVERAGE
HINO Engines - NEW COVERAGE
International Motors Suite
Caterpillar Engines Suite
PACCAR Engines and Transmissions
PSI Engines
Heavy-Duty Standard J1708 / J1939, EOBD / OBD II

Allison Transmission Suite

Diagnose the latest transmissions from Allison quickly and easily with the latest software. Users can reset shift adaptations after a transmission rebuild or to diagnose shift concerns. Detailed information on transmission health and performance can be obtained.

Added support for Gen 6 Transmissions. Includes Faults, Data and the Following Tests:

Reset Transmission Health Monitor Test (1K2K and 3K4K)
Clear All Shift Adaptive Data Test (1K2K and 3K4K)
Reset Auto Detect Oil Level Sensor Test (3K4K)
Reset Adaptive Shift Parameters Test (1K2K and 3K4K)

ABS Brakes Suite

WABCO Diagnose and repair the latest brake system commonly found on school buses and coaches.

Added support for the E455 Brakes. Includes Faults, Data and the Following Tests:

Lamp Test
ATC Enable/Disable Test
Activate Valves Test
Retarder Relay Activation Test
Engine Datalink Test

Cummins Engines

Read and diagnose the latest Cummins engines without missing any support or information. Enhanced Freeze Frame support displays necessary information, including ECU time, to ease diagnostics.

Updated Variant support for engines through MY2025. Includes support for BNN (X15 CM2450 X142B) and BMF (X12 CM2450 X137B).

Updated Freeze Frame data for all EPA13+ engines
Added the Following Calibrations:
- Remote Accelerator Pedal or Lever
- Remote Accelerator Pedal or Lever Mode
The Freeze Frame screen shows the current values of Engine Run Time and ECM Time parameters.
Bug Fixes and improved support for Freeze Frame data for CNG engines.

Volvo/Mack

Diagnose a greater amount of Volvo / Mack truck modules with new support, cutting diagnostic time. Enhanced fault detail on modules removes guesswork from diagnostics. Test, diagnose, and repair Volvo transmissions with new coverage.

Faults now show the FTB and FTB Description on the Faults screen, reports, and in Vehicle History.
Added support for newer variants for MY 2012 - 2024.

VNL4 Model

Engine - Faults, Data and the Following Tests

Exhaust AFT Service Regeneration
Exit Inducement
Aftertreatment DPF System Reset
Exhaust AFT System Active Diagnostic Test
Hydrocarbon Doser Functionality Test
Aftertreatment Hydrocarbon Dosing
SCR-DEF Pressure Build
SCR-DEF Dosing
SCR-System Drain
Injector Click Test
Injector Cutout
Boost Pressure Test Drive
Fuel Pressure
Intake and Exhaust Systems Check
Piston Cooling Jet Valve Control
Engine Protection Data Service Routine
Cylinder Balancing
Compression Brake Test
Injector Code Calibrations

ACM (Aftertreatment Control Module) – Faults and Data

VMCU (Vehicle Management Control Unit) – Faults and Data

TECU (Transmission; applicable for VNL4) – Faults and Data

EBS (Electronic Brake System) – Faults and Data

Volvo Transmission

Clutch Cylinder Procedure Test
Gear Activation, Control Housing (Transmission Installed, Transmission Removed)
Clutch Wear Check
Transmission (Transmission Removed)

Volvo OBD

Support to scan multiple modules communicating on J1979-2 (OBD on UDS) like the Volvo VNL4
Allow scanning on Volvo VNL4 via the LMT – OBDII scan.
Supports Faults and Data

Detroit Diesel Suite

Diagnose and repair Detroit Diesel transmissions with newly supported tests. Pinpoint issues with proper test and reset procedures. Read and diagnose more Freightliner body and chassis with enhanced coverage. Enhanced support for Detroit Diesel engines with newer variant coverage.

DDEC 6-20 Engine & Freightliner Body/Chassis

TCM01 and TCM05T DTNA Transmission Tests
Tilt Sensor Calibration
TCM Release Lock
Countershaft Brake Test
Clutch Apply Leak Test
Transmission Learn Procedure
Gear Activation Procedure
Range Activation Procedure
Split Activation Procedure

International Motors

Read faults and data on the latest International engines and transmissions to quickly diagnose issues or concerns.

International A26 EPA 21 Engines

Faults and Data

International S13 Integrated Powertrain System

Faults and Data for Following Modules:

ECM
ACM (Aftertreatment Control Module)
PIM
GSM (Gear Shift Module)
T14 Transmission

Light and Medium Truck Suite

Read and diagnose the latest Ford and Chrysler products with new vehicle support to 2024 for major systems. Enhanced faults, data, and testing functionality.

Ford

Added fault and data coverage for 2021 – 2024 models with tests for engine, brake, and transmission systems.

Chrysler