Overview
The BP32 Wireless Alarm Panel acts as the central brain of a Verkada wireless alarm system. Powered by a single PoE cable and small enough to fit discreetly in tight spaces, the BP32 is easy to install in any environment. The panel alone supports up to 160 wireless sensors via its built-in VLink hub, with unlimited expansion through WH52 hubs, WH32 repeaters, and BK22 keypads.
The BP32 panel operates locally with all alarm and access control devices on site, allowing for greater reliability and offline functionality. And with its built-in LTE communicator and backup battery, the BP32 is designed to stay online during network and power outages.
Like other Verkada products, the BP32 is cloud-managed and natively integrates with other Verkada devices. Through the Command web or mobile app, users can view live and historical sensor activity, manage key codes, and configure software-defined partitions. Organizations additionally benefit from alerts for offline devices, 24/7 support, and automatic firmware updates.
Image: A white, square wireless alarm panel with two prominent antennas on top. The Verkada logo and "BP32 Wireless Alarm Panel" are visible. Below the title are status indicators labeled "NEW ALARMS" and "V LINK".
Key Features
Complete Site Coverage
- Built-in VLink hub supports up to 160 wireless sensors
- Connect unlimited BK22 keypads and WH52 hubs over LAN
- Extend range with WH32 wireless repeaters
Cloud-managed
- Manage the panel and all connected devices in Verkada Command
- Automatic health checks every minute, with real-time alerts
- Automatic firmware updates for the latest features and security enhancements
Highly Available
- Withstands network outages by operating locally with all alarm devices on site
- Built-in LTE backup and up to 30-hour backup battery
Cloud-Managed Platform
Verkada’s cloud-based management platform can greatly reduce overhead for multi-site organizations. Users can easily monitor system health, manage key codes, configure partitions, and troubleshoot devices — all without being on site.
Image Description: A screenshot of the Verkada Command interface. The left panel displays a device hierarchy, starting with "Main Building Alarm Panel" and listing connected devices such as "IDF Door" (Wired Contact Sensor), "Front Entrance Door" (Wireless Contact Sensor), "IDF Water Leak" (Wireless Water Leak Sensor), "Front Entrance Keypad", "Reception Panic Button" (Wireless Panic Button), and "Lobby Motion" (Wireless Motion Sensor). The right panel shows detailed information for the selected "Front Entrance Door" device, including its status (e.g., "Closed"), activity log, connection signal strength (RSSI -55), battery status ("Normal"), sensor type, sensitivity settings, mute options, and video verification toggle.
Compact Design
The BP32's compact form factor allows for easy installation in tight spaces while its low-profile design blends into most environments.
Technical Specifications
Power and Network
| Parameter | Value |
|---|---|
| Power Consumption | 3.1W standby, 24.5W max |
| Power Input | IEEE 802.3at PoE+ (with RS485 output) IEEE 802.3af PoE (no RS485 output) |
| Backup Battery (Internal) | 57.6 Wh rechargeable LiFePO4 battery, 30 hours of backup with typical use and no RS485 output |
| Uplink | 100/1000 Mbps RJ45 port, Built-in LTE backup communicator |
| Wireless Communication | VLink sub-GHz transceiver |
| VLink Wireless Range | Please refer to the downstream device datasheet |
Inputs and Outputs
| Parameter | Value |
|---|---|
| RS485 Output | 1x RS485 output with 36V DC aux power (167 mA max). 802.3at PoE input required for aux power. |
| Switches | Power switch, Mic disable switch, Tamper switch |
Cellular
| Parameter | Value |
|---|---|
| Modem | CAT 4 LTE modem |
| SIM | 1x Nano 4FF SIM slot. Verkada SIM included (BYO SIM not supported). |
| Bands | LTE FDD: 2, 4, 5, 12, 13, 14, 66, 71 HSPA+: 2, 4, 5 |
| Antenna | 2x paddle antennas (SMA connectors) |
Available Carriers on Verkada SIM
| Region | Carriers |
|---|---|
| United States | AT&T, T-Mobile, Verizon Wireless, Alaska Wireless, Choice Wireless, Commnet, Pulse Mobile Teleguam, TELNA, Viaero, Cincinnati Bell, Indigo Wireless, Limitless, Tampnet, Union Telecom, US Cellular, Viaero |
| Canada | Bell Mobility, Rogers Wireless, Sasktel, Telus, Videotron |
Compliance and Certifications
| Category | Certification |
|---|---|
| RF & EMC | FCC, IC |
| Cellular | PTCRB, T-Mobile, AT&T |
| Safety | UL/cUL/IEC 62368-1, CSA C22.2 No. 62368-1 |
General
| Parameter | Value |
|---|---|
| Dimensions (Main unit) | H: 7.5" (19.1 cm), W: 7.5" (19.1 cm), D: 1.8" (4.4 cm) |
| Dimensions (With antennas) | H: 13.5" (34.3 cm), W: 7.5" (19.1 cm), D: 1.8" (4.4 cm) |
| Weight | 2.8 lb (1.3 kg) |
| Operating Temperature and Humidity | 32 to 122° F (0 to 50° C), 0-90% RH non-condensing |
| Warranty | 10 years |
Installation
| Parameter | Value |
|---|---|
| Included Accessories | 2x paddle antennas, mount plate, T10 Security Torx screwdriver, 4x wall screws, 4x wall anchors |
| Mounting Options | Wall or ceiling mount |
Note: Certifications pending and expected by the product ship date.
Ordering Information
Wireless Alarm Panel
| Model Number | Description | Cost (MSRP) USD |
|---|---|---|
| BP32-HW-NA | BP32 Wireless Alarm Panel, North America | $799 |
Cellular Backup License (Optional)
| Model Number | Description | Cost (MSRP) USD |
|---|---|---|
| LIC-BX-CEL-1Y-CAP | 1-Year Cellular Backup License With Data, Capacity Increase | $299 |
| LIC-BX-CEL-3Y-CAP | 3-Year Cellular Backup License With Data, Capacity Increase | $849 |
| LIC-BX-CEL-5Y-CAP | 5-Year Cellular Backup License With Data, Capacity Increase | $1,349 |
| LIC-BX-CEL-10Y-CAP | 10-Year Cellular Backup License With Data, Capacity Increase | $2,699 |
| LIC-BX-CEL-1Y-RNW | 1-Year Cellular Backup License With Data, Renewal | $299 |
| LIC-BX-CEL-3Y-RNW | 3-Year Cellular Backup License With Data, Renewal | $849 |
| LIC-BX-CEL-5Y-RNW | 5-Year Cellular Backup License With Data, Renewal | $1,349 |
| LIC-BX-CEL-10Y-RNW | 10-Year Cellular Backup License With Data, Renewal | $2,699 |
