LEDEEZ Sound-Reactive DIY Light Strip - User Manual

Introduction

Thank you for purchasing the LEDeez™ USB Powered Sound Activated DIY LED strips. Please read all instructions carefully before using and retain this manual for future reference. You can also connect to the "Flexy-Smart" App to unlock more functional modes (color mode, dynamic mode, Music mode, etc.).

Read & Follow All Safety Instructions First

• This product is to be used with the recommended power adapter.
• Keep away from sharp objects or strong corrosive chemicals.
• Although this product has good bending properties, when bending the neon strip, try not to fasten too tightly or bend too much to avoid damage.
• Do not install neon strips near any heat sources.
• Do not let children install neon strips alone. Avoid installing neon strips near potential hazardous sources (e.g., candles, liquid-filled objects).
• Unfold the neon strip before shaping and powering on.

Product Specifications

Installation Steps

1. Wipe the location to be installed with a clean cloth. Make sure the wall surface is dry and free of debris.
2. Place the included mounting buckles on the wall in the desired position and secure with screws. (Use adhesive sticker as an alternative option for hanging). [Illustration: Screws] [Illustration: Fixed buckle] [Illustration showing how to align screws with the holes in a fixed buckle.] [Illustration of a screw.] [Illustration of a fixed buckle.]
3. Press the light strip into the mounting buckles and connect the power end to your power source (DC5V USB-A port). [Illustration showing the light strip being pressed into the fixed buckles.]
4. Install the app (see next page) and begin usage.

Using the App

• Download and install the "Flexy-Smart" App.
• Scan the QR-Code to download the APP or search for "Flexy-Smart" on Google Play or APP store to download it. [QR Code for Flexy-Smart App download]
• This APP supports Android 4.3 above / iOS 8.0 above.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Distribution & Support

LEDEEZ

DGL Group guarantees the quality of this product. For questions or comments, please feel free to contact us via email at support@dglusa.com

Distributed by DGL Group, LTD.
2045 Lincoln Hwy. 3rd Floor, Edison, NJ, 08817, USA.
www.dglusa.com