User Manual for infobit models including: DB-TR-22 Dante Bluetooth Transceiver, DB-TR-22, Dante Bluetooth Transceiver, Bluetooth Transceiver, Transceiver
File Info : application/pdf, 3 Pages, 177.43KB
DocumentDocumentiTrans DB-TR-22 Dante Bluetooth Transceiver All Rights Reserved Version: V1.1 Product Introduction Thanks for choosing the iTrans DBTR-22. It connects to your Dante network and supports 2X1 channels of wireless audio, allowing PC and mobile device to playout and receive audio with your Dante devices using a Bluetooth connection. Features Plug and Play 24-bit audio support 2X1 audio channels Supports 802.3af PoE Bluetooth 5.0 Maximum transmission distance 20m Packing List 1 x iTrans DB-TR-22 1 x User Manual Note: Please contact your distributor immediately if any damage or defect in the components is found. Panel Description RJ45: Dante network communication port. Green steady light indicates system ready; yellow flashing light indicates link/data traffic. The green light will flash to identify the device when clicking the Dante Controller "Identify" button (an eye-shaped symbol) on the host computer. Bluetooth: 1 x backlit key, blue backlight, for Bluetooth pairing. Bluetooth pairing process After the device is powered on, press the pairing button, the blue backlight of the button flashes quickly, indicating that the device is in the state of being connected. After the Bluetooth device is successfully paired with it, the blue backlight of the button is always on. If the Bluetooth is not connected to any device within one minute, the blue backlight is off, the Bluetooth is turned off, and the pairing button needs to be pressed again. In the power-on state, press and hold the button for more than 5 seconds, the backlight will turn off. At this time, the pairing will be reset, and the Bluetooth will return to the initial state. Technical Specification Dante Power Sample Rate Dante Device Latency Bit Depth Channels Control Control Part General Power Operation Temperature Storage Temperature Power Consumption 802.3af PoE 48 kHz 1,2 or 5ms (configurable using Dante Controller) 24 Bluetooth 2X1 (1) Bluetooth 802.3af PoE -5 to +55 -25 to +70 1.9W(Max) Dimension (W*H*D) Net Weight 115x 34 x 28 mm 70g WWW.INFOBITAV.COM INFO@INFOBITAV.COM