Surenoo Technology SA3 LC1602M LCD Module User Manual

User Manual for Shenzhen Surenoo Technology models including: SA3 LC1602M, SLC1602M Series, SA3 LC1602M LCD Module, LCD Module

Surenoo

Surenoo Tech

Surenoo Character LCD Display

File Info : application/pdf, 16 Pages, 1.43MB

SLC1602M

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
SLC1602M Series
LCD MODULE USER MANUAL
Please click the following image to buy the sample

Model No.: S3ALC1602M

Shenzhen Surenoo Technology Co.,Ltd. www.surenoo.com Skype: Surenoo365
Reference Controller Datasheet
Character LCD Selection Guide
AiP31068L Test Code
www.surenoo.com

Page: 01 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLC1602M

A3
Overview

>> Features

I2C interface, only two cables can be directly controlled, easy to access a variety of control boards Can display up to 16 x 2 characters, support screen scrolling, cursor movement, and other functions The appearance is exquisite and compact, and the workmanship is exquisite and beautiful. Highly integrated design, stable performance, fine workmanship, compact body with the dimensions of 87 * 32 * 13 mm. Onboard AiP31068L LCD driver chip Provide complete supporting information manuals (user manuals/sample demos)

>> Parameters

Operating voltage: 3.3V/5.0V Communication interface: I2C Screen type: LCD screen Control chip: AiP31068L Slave address: 0X7C Display dimensions: 64.5 x 16.0 mm Product size: 87.0 x 32.0 x 13.0(mm) Operating current: 26mA(5V), 13mA (3.3V)

>> Interface Description

Pin VCC GND SCL SDA

Description 3.3V/5V power input Ground I2C clock cable I2C data cable

>> Communication Protocol

www.surenoo.com

Page: 01 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.
>> Outline Dimension

Model No.: S3ALC1602M

R SLC1602M
STN Yellow Green / STN Blue Negative / FSTN Positive 1PCS LED
AIP31068L

UNIT: mm

23/03/08

Pin VCC GND SCL SDA

Description 3.3V/5V power input Ground I2C clock cable I2C data cable

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: SLC1602M Series

2023/03/08

www.surenoo.com

Page: 03 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

Working with Raspberry Pi
>> Hardware Setting
Enable I2C Interface Open the Raspberry Pi terminal, enter the following command to enter the configuration interface.
sudo raspi-config Select Interfacing Options -> I2C ->yes to start the i2C kernel driver

And then reboot the Raspberry Pi. sudo reboot
www.surenoo.com

Page: 04 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

Hardware Connection When connecting the Raspberry Pi, choose to connect with a 4PIN cable, please refer to the pin correspondence

table below.

If you are using a pin header or PH2.0 4PIN interface, you need to connect according to the following table.

Raspberry Pi Pin Connection Correspondence

LCD

BCM2835

Raspberry Pi

Board Pin No.

VCC

3.3V

GND

SCL

SCL.1

SDA

SDA.1

Take the LCD1602 Module using the PH2.0 4PIN interface as an example, and connect it to the Raspberry Pi according to the above table: (Please connect according to the pin definition table. The color of the cable in the picture is for reference only, and the actual color shall prevail.)

www.surenoo.com

Page: 05 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

>> Example Demo
#Download sample demo cd ~ wget https://www.surenoo.tech/download/SLC1602M_I2C_Code.zip unzip LCD1602_I2C_Module_code.zip cd ~/LCD1602_I2C_Module_code/Raspberry sudo chmod 777 * cd python/ sudo python test.py #Display two lines of characters on the LCD sudo python time_test.py #Automatically obtains the local time and displays it on the LCD
Demo analysis (test.py)
lcd.setCursor(0, 0) #Set the cursor position #Print the number of seconds since reset: lcd.printout("Waveshare") #Write characters lcd.setCursor(0, 1) #Set the cursor position to the zeroth column of the sec ond row lcd.printout("Hello, World!")#Write characters

www.surenoo.com

Page: 06 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Working with Pico
>> Hardware Connection
Pico Pin Connection Correspondence Module Interface VCC GND SCL SDA The physical connection diagram is as follows:

Pico Pin 3.3V GND GP5 GP4

Model No.: S3ALC1602M

www.surenoo.com

Page: 07 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

>> Raspberry Pi
1. Use SSH to log in to the Raspberry Pi terminal or press Ctrl+Alt+T while using the screen to open the terminal. 2. Download and decompress the demo to the Pico C/C++ SDK directory, and the users who have not installed SDK can refer to tutorial.
#Pay attention to your own directory, the default installation directory of the SDK installation tutorial is ~/pico/, if the user customizes other directories, change it by yourself wget https://www.surenoo.tech/download/SLC1602M_I2C_Code.zip
unzip LCD1602_I2C_Module_code.zip
cd LCD1602_I2C_Module_code/Pico
micro python 1. Configure settings according to the python environment, using the Raspberry Pi desktop system. 2. Open the Thonny IDE of the Raspberry Pi system, pull the code file into the IDE, and save LCD1602.py to the Pico file system (refer to the Window operation module below), as shown in the figure.

www.surenoo.com

Page: 08 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

>> Windows
micro python 1. Download and decompress the sample program to the Windows desktop, open the pico corresponding file, refer to the Windows software environment settings. 2. Open the downloaded sample program in Thonnty, as shown in the figure below.

www.surenoo.com

Page: 09 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

Here you also need to save LCD1602.py to PICO, select LCD1602.py, save it as Raspberry pi pico, and name it LCD1602.py.

Finally, just run the demo under test.py or time_test.py. Demo analysis: (test.py) lcd.setCursor(0, 0) #Set the cursor position # print the number of seconds since reset: lcd.printout("Waveshare") #write characters lcd.setCursor(0, 1) #Set the cursor position to the zeroth column of the second row lcd.printout("Hello, World!")#write characters

www.surenoo.com

Page: 10 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Working with Arduino
>> Hardware Connection
Arduino Pin Connection Correspondence Module Interface VCC GND SCL SDA Connection diagram:

Arduino Pin 5V/3.3V GND SCL SDA

Model No.: S3ALC1602M

>> Arduino IDE
Download this sample demo in the Resource, enter the Arduino folder, and double-click to open the test.ino file, Arduino IDE will automatically load the driver library under the same folder, select the correct driver board model and its corresponding port number, click the upload button to automatically start compiling and uploading the demo, and the demo will run automatically after the upload is successful.

This demo has been tested and run on Arduino uno development board and Arduino mega2560 development board.

www.surenoo.com

Page: 11 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

Working with ESP32
>> Environment Setting
Install the ESP32 Plug-in in the Arduino IDE 1. Open the Arduino IDE, click on the file in the upper left corner, select Preferences:

2. Add the following link in the additional development board manager URL, then click OK. https://dl.espressif.com/dl/package_esp32_index.json

www.surenoo.com

Page: 12 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

Note: If you already have the ESP8266 board URL, you can separate the URLs with commas like this:
https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/ stable/package_esp8266com_index.json
Download the packages compressed package and copy the decompressed packages file to the following path:
C:\Users\surenoo\AppData\Local\Arduino15

www.surenoo.com

Page: 13 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

Note: Replace the username: surenoo with your own username.

>> Hardware Connection

When connecting to ESP32, choose to connect with a 4PIN cable, please refer to the pin correspondence table

below:

If you are using a pin header or PH2.0 4PIN interface, you need to connect according to the following table.

ESP32 Pin Connection Correspondence

LCD Interface

ESP32 Pin No

VCC

5V/3.3V

GND

SCL

GPIO22

SDA

GPIO21

Take the LCD1602 Module using the PH2.0 4PIN interface as an example, and connect it to the ESP32

according to the above table:

(Please connect according to the pin definition table. The color of the wiring in the picture is for reference only,

and the actual color shall prevail.)

Connect to ESP32 as shown in the figure below.

www.surenoo.com

Page: 14 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

>> Use With Arduino IDE
Download this sample demo in the Resource, enter the ESP32 folder, double-click to open the test.ino file, Arduino IDE will automatically load the driver library under the same folder, select the correct driver board model and its corresponding port number, click the upload button to automatically Start compiling and uploading the demo, and the demo will run automatically after the upload is successful.

www.surenoo.com

Page: 15 of 16

SHENZHEN SURENOO TECHNOLOGY CO.,LTD.

Model No.: S3ALC1602M

Working with Jetson Nano

>> Hardware Connection

When connecting Jetson nano, choose to connect with 4PIN cable, please refer to the pin correspondence table below:

If you are using a pin header or PH2.0 4PIN interface, you need to connect according to the following table:

Jetson nano Pin Connection Correspondence

LCD

Jetson nano BCM2835 Pin

Board Pin No.

VCC

3.3V

3.3V/5V

GND

SCL

SCL.1

SDA

SDA.1

Take the LCD1602 Module using the PH2.0 4PIN interface as an example, and connect it to the Jetson nano

according to the above table:

(Please connect according to the pin definition table. The color of the wiring in the picture is for reference only,

and the actual color shall prevail.)

Connect to Jetson nano as shown below:

Sample Demo
cd ~ wget https://www.surenoo.tech/download/SLC1602M_I2C_Code.zip unzip LCD1602 I2C Module_code.zip cd ~/LCD1602 I2C Module_code/Jetson\ Nano sudo chmod 777 * cd python/ sudo python time_test.py #Automatically obtains the local time and displays it on t he LCD

www.surenoo.com

Page: 16 of 16

References

3-Heights™ PDF Optimization Shell 6.3.1.5 (http://www -tools.com)