Linocell Wireless Keyboard for Tablets

Overview

The keyboard features several indicators and a charging port:

• Caps lock indicator
• USB-C charging port
• Bluetooth indicator
• Battery indicator
• Power on/off switch

Specifications

Before first use

Charge the keyboard fully before using it for the first time.

Use

Charging

Connect the included USB-C charging cable between the USB-C charging port and a USB power adapter (sold separately). The battery indicator lights up red during charging and turns green when the keyboard is fully charged. A full charge takes up to 4 hours. The battery indicator flashes red when the battery power is low.

Power on/off

Slide the Power on/off switch on the back of the keyboard to "On" to turn the keyboard on. The battery indicator lights up green for 3 seconds and turns off, but the keyboard remains active. Slide the Power on/off switch to "Off" to turn off the keyboard.

Note: The keyboard automatically enters sleep mode after 30 minutes of inactivity to save battery power. Press any key and wait a few seconds to wake it.

Bluetooth pairing

The keyboard can be connected to up to 3 different Bluetooth devices, allowing for easy switching between them once a connection is established.

To initiate Bluetooth pairing, hold down the Fn key and the number 1 key on the keyboard for 3 seconds. The Bluetooth indicator will flash green. On your device, open Bluetooth settings, search for "Linocell BTK17", and connect. The Bluetooth indicator will turn solid green upon successful connection.

To pair additional devices, repeat the process, using the number 2 or 3 key instead of 1. The Bluetooth indicator color changes to signify the active Bluetooth channel:

• Bluetooth 1: green light
• Bluetooth 2: blue light
• Bluetooth 3: red light

To switch keyboard focus between paired devices, hold down the Fn key and tap the number corresponding to the device's paired channel. To disconnect a Bluetooth device, hold down the Fn key and the number key for the connected device for 3 seconds.

Multimedia keys

The keys in the top row (F1-F10) provide functions or shortcuts, often indicated by blue markings. Note that function key commands may vary across different operating systems. Functions like PgUp, PgDn, Home, and End are activated when the Fn key is held down.

Troubleshooting

Keyboard not turning on or battery indicator flashing red

This indicates the battery is low or depleted. Charge the keyboard.

Device connected, but no input registered

The keyboard may be in sleep mode. Press any key and wait a few seconds for it to wake up.

If the issue persists, try removing the keyboard from your device's Bluetooth settings. Navigate to your device's Bluetooth settings, find "Linocell BTK17" under "My devices" or "Paired devices", tap the information icon [i] next to it, and select "Forget This Device". Then, re-pair the keyboard.

Safety information

The product contains a rechargeable Li-ion battery that cannot be replaced. Do not store the product with a completely discharged battery for extended periods. To prevent battery damage, charge the battery every three months during long-term storage. Never attempt to disassemble or repair the product yourself; repairs should only be performed by a qualified technician. It is recommended to turn off the keyboard when not in use to extend the battery's lifespan.

Simplified EU Declaration of Conformity

Kjell & Company declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.kjell.com/65441.

Environmental Information

The product is marked with a CE symbol, indicating compliance with EU directives. It also includes symbols indicating it should not be disposed of with household waste and should be recycled according to local regulations [WEEE symbol] [recycling symbol].