Wireless Without Worries - LumenRadio
Installation Guide for lumenradio models including: DIN rail, wall mount, W-BACnet DIN Rail, W-BACnet, DIN Rail, Rail
16 giu 2024 — A - Move the switch to ”COMM” or B - Move the switch to ”....”. Continue by installing the LumenRadio node next to your field.
File Info : application/pdf, 17 Pages, 1.53MB
DocumentDocumentINSTALLATION GUIDE Connect your building automation system with wireless BACnet ...or here! HOTEL No need for cables here... For installation, no BACnet cables are needed. W-BACnet DIN rail W-BACnet wall mount You need this for installation. Choose either W-BACnet DIN rail or W-BACnet wall mount. A. DIN rail Building MGMT system B. wall mount BBuuildildinigng MMGGMMTTsyssytsetmem The LumenRadio device next to the BACnet controller (router) can serve as your gateway, with both DIN rail and wall mount options available. A. DIN rail GATEWAY SET-UP B. wall mount ON 123 4 5 Set your Baud rate, stop bit and parity on the gateway (A or B). A. DIN rail B. wall mount A - Move the switch to "COMM" or B - Move the switch to "....". Continue by installing the LumenRadio node next to your field devices, starting with the one closest to your gateway. Ex. Node to zone controller or or Connect the LumenRadio device with chosen device (zone controller). Optionally, set a local Baud rate. Ex. Node to room controller or or Place the LumenRadio device preferably above the chosen device (room controller) and connect. Optionally, set a local Baud rate. A. DIN rail B. wall mount The lights on your node will now sweep in blue. A. DIN rail B. wall mount When the lights start blinking green, the node has found the gateway. This can take up to five minutes. A. DIN rail Building MGMT system B. wall mount BBuuildildinigng MMGGMMTTsyssytsetmem Go back to the gateway. A. DIN rail B. wall mount A - Move the switch to "GATEWAY" or B - Move the switch to "...." A. DIN rail B. wall mount The devices blink yellow entering secure mode. This may take up to 5 minutes. HOTEL Now you have a wireless connection! A. DIN rail B. wall mount To use the W-BACnet app, press the button on the gateway three times so that it blinks blue twice and you are ready to connect. W-BACnet app Verify your installation in the app. For a detailed overview, select Network Map. Learn more at www.lumenradio.com