End-of-Sale and End-of-Life Announcement

For the Cisco N9K-C93180YC-EX and Cisco N9K-C93108TC-EX

Overview

EOL14472 - Amended

Cisco announces the end-of-sale and end-of-life dates for the Cisco N9K-C93180YC-EX and Cisco N9K-C93108TC-EX. The last day to order the affected product(s) is August 9, 2022. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

End-of-life milestones

Table 1. End-of-life milestones and dates for the Cisco N9K-C93180YC-EX and Cisco N9K-C93108TC-EX

Milestone Definition Date
End-of-Life Announcement Date The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. August 9, 2021
End-of-Sale Date: HW The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. August 9, 2022
Last Ship Date: HW The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. November 8, 2022
End of SW Maintenance Releases Date: HW The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. August 9, 2023
End of Vulnerability/Security Support: HW The last date that Cisco Engineering may release a planned maintenance release or scheduled software remedy for a security vulnerability issue. August 8, 2025
End of Routine Failure Analysis Date: HW The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. August 9, 2023
End of New Service Attachment Date: HW For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. August 9, 2023
End of Service Contract Renewal Date: HW The last date to extend or renew a service contract for the product. November 7, 2026
Last Date of Support: HW The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. August 31, 2027

HW = Hardware
OS SW = Operating System Software
App. SW = Application Software

Product part numbers

Table 2. Product part numbers affected by this announcement

End-of-Sale Product Part Number Product Description Replacement Product Part Number Replacement Product Description Additional Information
N9K-C93108-EX-B24C 2xNexus 93108TC-EX w/ 8x 100G Optics N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -
N9K-C93108TC-EX++ Nexus 9300 with 48p 10G BASE-T and 6p 100G QSFP28 TAA PID N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -
N9K-C93108TC-EX-1G Limited orderable: Nexus 9K, w/ 48p 1G BASE-T and 6p 100G N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -
N9K-C93108TC-EX-24 Nexus 9300-EX w/ 24p 100M/1/10GT & 6p 40/100G N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -
N9K-C93108TC-EX-B Nexus 93108TC-EX bundle PID N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -
N9K-C93108TC-EX24= Nexus 9300-EX 24x100M/1/10GT & 6x100G,Spare(no Acc/PSU/fan) N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -
N9K-C93108TC-EX= Nexus 9K,48p 10GT, 6p 100G QSFP28, Spare (No Acc kit,PS&fan) N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -
N9K-C93108TCEX-1G= Nexus 9300 with 48p 1G BASE-T and 6p 100G Spare N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -
N9K-C93108TCEXB18Q 2 Nexus 93108TC-EX with 8 QSFP-40G-SR-BD N9K-C93108-FX3-B8C 2xNexus 93108TC-FX3P w/ 8x 100G Optics -
N9K-C93180-EX-B24C 2xNexus 93180YC-EX w/ 8x 100G Optics N9K-C93180YC-FX3 Nexus 9300 48p 1/10/25G, 6p 40/100G, MACsec UP. SyncE -
N9K-C93180YC-EX++ Nexus 9300 with 48p 10/25G SFP+ and 6p 100G QSFP28 TAA PID N9K-C93180YC-FX3 Nexus 9300 48p 1/10/25G, 6p 40/100G, MACsec UP. SyncE -
N9K-C93180YC-EX-24 Nexus 9300-EX w/24p 1/10/25G & 6p 40/100G N9K-C93180YC-FX3 Nexus 9300 48p 1/10/25G, 6p 40/100G, MACsec UP. SyncE -
N9K-C93180YC-EX-B Nexus 93180YC-EX bundle PID N9K-C93180YC-FX3 Nexus 9300 48p 1/10/25G, 6p 40/100G, MACsec UP. SyncE -
N9K-C93180YC-EX24= Nexus 9300-EX w/24p 1/10/25G & 6p 100G;Spare(no Acc/PSU/fan) N9K-C93180YC-FX3 Nexus 9300 48p 1/10/25G, 6p 40/100G, MACsec UP. SyncE -
N9K-C93180YC-EX= Nexus 9K,48p 10/25G&6p 100G QSFP28, Spare(No Acc kit,PS&fan) N9K-C93180YC-FX3 Nexus 9300 48p 1/10/25G, 6p 40/100G, MACsec UP. SyncE -
N9K-C93180YC-ZZ-PI Limited, Nexus 93180YC-EX, port side intake w/L3 Lic N9K-C93180YC-FX3 Nexus 9300 48p 1/10/25G, 6p 40/100G, MACsec UP. SyncE -
N9K-C93180YCEXB18Q 2 Nexus 93180YC-EX with 8 QSFP-40G-SR-BD N9K-C93180-FX3-B8C 2xNexus 93180YC-FX3 w/ 8x 100G Optics -
N9K-C93108TC-EX Nexus 9300 with 48p 10G BASE-T and 6p 100G QSFP28 N9K-C93108TC-FX3P Nexus 9300 48x 100M/1/2.5/5/10GT, 6x 100G Switch -

Product migration options

Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at: https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.

Customers may be able to continue to purchase the Cisco N9K-C93180YC-EX and Cisco N9K-C93108TC-EX through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.

Service prices for Cisco products are subject to change after the product End-of-Sale date.

The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.

For more information

For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/en/US/products/products_end-of-life_policy.html.

For more information about the Cisco Product Warranties, go to: https://www.cisco.com/en/US/products/prod_warranties_listing.html.

To subscribe to receive end-of-life/end-of-sale information, go to: https://www.cisco.com/cisco/support/notifications.html.

Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.


File Info : application/pdf, 7 Pages, 321.61KB

PDF preview unavailable. Download the PDF instead.

n9k-c93180yc-c93108tc-ex-eol

References

Microsoft Word 2010 䵩捲潳潦璮⁗潲搠㈰㄰㬠浯摩晩敤⁵獩湧⁩呥硴′⸱⸷⁢礠ㅔ㍘

Related Documents

Preview Cisco ACI Fabric Endpoint Learning: A Comprehensive Guide
Explore the intricacies of Cisco ACI fabric endpoint learning, covering behavior, deployment, and optimization options for efficient network management and traffic flow.
Preview Cisco NX-OS Release Notes, Release 10.4(1)F for Nexus 9000 Series
This document provides release notes for Cisco NX-OS version 10.4(1)F, detailing new and enhanced software features, hardware support, known issues, and resolved issues for the Cisco Nexus 9000 Series switches.
Preview Cisco Nexus 9000 Series NX-OS Release Notes 10.3(8)M
Release notes for Cisco NX-OS version 10.3(8)M, detailing supported hardware, new features, resolved issues, and compatibility information for Cisco Nexus 9000 series switches.
Preview Cisco Category 4 LTE USB Dongles: End-of-Sale and End-of-Life Announcement
Official announcement from Cisco detailing the end-of-sale and end-of-life dates for Cisco Category 4 LTE USB Dongles, including product part numbers and migration strategies.
Preview Configuring MACsec on Cisco NX-OS Devices
This document provides a comprehensive guide on configuring MACsec (Media Access Control Security) on Cisco NX-OS devices, covering essential aspects from basic setup to advanced configurations and troubleshooting.
Preview Cisco NX-OS ソフトウェア機能のライセンス ガイド
Cisco NX-OSソフトウェア機能のライセンスに関する包括的なガイド。Cisco Nexusスイッチでの永続ライセンス、サブスクリプション、階層型パッケージ(Essentials、Advantage、Premier)の導入と管理について、各プラットフォーム別に詳しく解説します。
Preview Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
A comprehensive guide for configuring Quality of Service (QoS) features on Cisco Nexus 9000 Series switches running NX-OS. Learn about classification, marking, policing, queuing, and scheduling to optimize network traffic.
Preview Configuring sFlow on Cisco NX-OS Devices
A comprehensive guide to configuring sFlow (Sampled Flow) on Cisco NX-OS network devices, covering prerequisites, guidelines, default settings, and step-by-step configuration procedures for traffic monitoring.