Juniper | Office Furniture for the Entire Workspace
Instruction Manual for Juniper models including: BLBC72 Laminate Bookcase, BLBC72, Laminate Bookcase, Bookcase
Laminate Bookcase | Juniper Office Furniture
File Info : application/pdf, 16 Pages, 691.30KB
DocumentDocumentKit-BLBC72 Laminate Bookcase Includes Add-Ons: A1 General Installation Guide TABLE OF CONTENTS Edition Code KIT-BLBC72 :: Laminate Bookcase............................................... 1 Add-ons A1 :: Locking Doors.................................................................................... 9 Bookcase Overview Laminate Bookcase All parts listed are for a laminate bookcase; additional parts will be needed for additional bookcases. 1 B O O KCAS E Parts List Code Qty. Description 1 Top Panel 1 Bottom Panel 2 KIT-BLBC72 1 Side Panels Back Panel 1 Fixed Shelf 3 Adjustable Shelves NOTE: Bookcase comes in 2 boxes. 2 B O O KCAS E 1 | Insert Hardware into Top Panel Insert hardware into pre-drilled holes as shown below. Requires 6 cam pins. Cam Pin 2 | Insert Hardware into Bottom Panel Insert hardware into pre-drilled holes as show below. Requires 6 cam pins. Cam Pin 3 B O O KCAS E 3 | Insert Hardware into Both Side Panels Insert hardware into pre-drilled holes as shown below. Requires 5 cam pines, 6 shelf pins, 4 wooden dowels, and 4 cam locks. NOTE: Repeat steps for both panels. Cam Lock Shelf Pin Wooden Dowel Cam Pin 4 B O O KCAS E 4 | Insert Hardware into Back Panel Insert hardware into pre-drilled holes as shown below. Requires 2 cam pins, 8 wooden dowels, and 12 cam locks. Wooden Dowel Cam Lock Cam Pin 5 | Insert Hardware into Fixed Shelf Insert hardware into pre-drilled holes as shown below. Requires 4 wooden dowels and 6 cam locks. Wooden Dowel Cam Lock 5 B O O KCAS E 6 | Secure Fixed Shelf to Back Panel Align cam pins on back panel with open cam locks on fixed shelf panel. Turn cam locks with screwdriver to lock cam pins in place. Tighten Cam Locks 7 | Secure 2 Side Panels Align 12 cam pins on side panels with 12 open cam locks on assembled back panel and shelf. Turn cam locks with screwdriver to lock cam pins in place. Tighten Cam Locks 6 B O O KCAS E 8 | Secure Top and Bottom Panels Align 6 cam pins on top panel with 6 open cam locks on side and back panels. Turn cam locks with screwdriver to lock cam pins in place. NOTE: Repeat steps for bottom panel. Tighten Cam Locks 9 | Insert Shelves Place and secure remaining 3 shelves onto shelf pins. 7 END OF BOOKCASE SECTION 10 | Place Cam Lock Covers Lock Covers 8 A1: Locking Doors Overview Laminate Bookcase All parts listed are for a laminate bookcase; additional parts will be needed for additional bookcases. 9 LOCKING DOORS Parts List Code Qty. Description BLBCD 1 Locking Doors (Set of 2) 10 LOCKING DOORS 1 | Place First Door Choose door placement then insert 4 wood screws through each door hinge and into bookcase side panel. NOTE: Repeat steps for second door. 2 | Secure Door Handle Using 2 wood screws, drive screws through door panel and into back of handle. NOTE: Repeat steps for second door. 11 END OF LOCKING DOORS SECTION 3 | Double Check All Hardware is Tightened 12 1-866-999-0955 | hello@juniperoffice.com | juniperoffice.com © 2023 Juniper Office | Version 23.0.0