Instruction Manual for AAMP Commercial models including: P-BUA-TRANSIT Wiring Harness for Backup Alarm, P-BUA-TRANSIT, Wiring Harness for Backup Alarm, Harness for Backup Alarm, Backup Alarm

Wiring Harness for Backup Alarm 2015-2022 Ford Transit

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 4 Pages, 715.22KB

Document Document

P-BUA-TRANSIT
Wiring Harness for Backup Alarm 2015-2022 Ford Transit
INSTALLATION MANUAL

Thank you for purchasing the P-BUA-TRANSIT
Table of Contents
Page 3 - Tools Required For Installation
WHAT'S INCLUDED:
· Vehicle Specific Wire Harness (P-BUA-TRANSIT)
COMPATIBLE ACCESSORIES:
· 97dB Backup Alarm (BUA-97C)
2

TOOLS REQUIRED:

1.

2.

3.

4.

1. 10mm Nut-setter 2. T-25 Torx Bit 3. Diagonal Cutters 4. Impact Drill

3

STEP 1:
Remove the (2) T-25 torque fasteners that are holding the tail lamp in place
STEP 2:
· Unplug the OEM tail lamp connection · Install the P-BUA-TRANSIT harness inline
between the two OEM tail lamp connectors
STEP 3:
Route the harness down through the bottom of the tail lamp opening, behind the bumper skin, and below the vehicle
4

STEP 4:
Use an impact drill and 10mm nut-setter to install a compatible backup alarm beneath the driver side rear corner of the vehicle. Note: (2) 10mm TEK screws are provided with the compatible backup alarm
STEP 5:
Use the provided p-clamps and self tapping screws to secure the harness to the underside of the vehicle
STEP 6:
Plug the backup alarm connector into the mating connector on the P-BUA-TRANSIT harness
STEP 7:
Re-install the tail lamp assembly and test the backup alarm
5