Shenzhen Discovery Technology Co., Ltd. S110 FPV Glasses Camera
Specifications
| Model | S110 |
|---|---|
| DSP | GPCV1167 |
| Sensor | GC2083 |
| Display | 0.96", IPS, 64×128 |
| Image Resolution | 12M/10M/8M/5M/3M/2M/1.3M/1M |
| Image Format | JPG |
| White Balance | Auto |
| Exposure | Auto |
| Video Resolution | 2.7K 30fps/1080p 30fps/720p 30fps |
| ISO | Auto |
| Loop Time | 1min/2min/3min/5min |
| Data Transfer | Type-C 5pin USB |
| Video Format | MP4 |
| Horn | Support |
| Compression Format | H.264 |
| WIFI APP | Roadcam |
| Angle of Lens | 110 degrees |
| Audio | Support |
| MIC | Support |
| Working Voltage | DC 5V 1A |
| Working Current | 180mA |
| Charging Current | 200mA |
| Memory | MAX 128G |
| USB | USB-Disk Support |
| Battery | 250mAh |
Appearance Structure and Button Operation Instructions
The S110 FPV Glasses Camera features a compact design with a 0.96-inch IPS color display. The device includes a working/recharging indicator light, a microphone, a Type-C charging port, a TF card slot, and a reset hole.
Button Functions:
- Power Button: Press and hold for 2 seconds to turn on/off. In recording or photo mode, a short press acts as a confirmation button. In settings mode, a short press navigates down.
- Menu (M) Button: In standby mode, short press to enter settings and navigate up/down (WIFI button for up, Power button for down). Short press M to confirm. Press and hold M to enter audio recording mode.
- WIFI Button: Press and hold for 2 seconds to turn Wi-Fi on or off. While recording video, a short press locks the current file, preventing it from being overwritten by loop recording. In the menu, press and hold to exit. In standby mode, a short press switches between video, photo, and replay modes.
- Reset/Mic: A short press on the reset hole turns off audio recording or resets the system if it is unresponsive.
Installation:
1. Remove the S110 device and the frame from the packaging. 2. Position the device and frame correctly on the front or side. 3. Ensure the camera lens faces forward, the display faces outward, and the back clip is positioned towards the right temple of the glasses. 4. Gently open the back clip and secure it onto the right temple of the glasses, pointing downwards. *Note: Due to variations in glasses frames, the included frame is provided to ensure compatibility for most users, as the device may only fit approximately 70% of market frames.*
Adjust the front and rear positions of the S110 on the frame for optimal photo and video results.
WIFI APP Connection:
- Press and hold the WIFI button to turn on Wi-Fi.
- Download and open the 'Roadcam' app.
- Tap the camera icon on the app's homepage to connect to the S110. Follow the on-screen prompts.
- Alternatively, connect to the Wi-Fi network named 'S110-******' from your phone's Wi-Fi list. The password is '12345678'.
[QR code for APP]
Notes and Precautions
- Memory Card Speed: For smooth recording, especially with high-resolution video, use a high-speed TF card (C10 or higher) as the device's write speed may not keep up with the data.
- Loop Recording: If loop recording is set to 'Off', the device will stop recording when the memory card is full and will not automatically overwrite old files.
- Image Clarity: Ensure the lens is clean and free of dust or fingerprints before shooting for clear images.
- Video Quality: Video quality can be affected by lighting conditions, such as backlight, front light, and light intensity.
- Device Freezing: If the device freezes, press the 'RESET' button briefly to restart it.
- Optimal Performance:
- Avoid operating the S110 for extended periods (>1 hour) outside the specified temperature range or in extremely humid environments (e.g., saunas, hot springs).
- Do not store the device in environments with excessively high temperatures or humidity.
- Do not attempt to disassemble the camera.
FCC Compliance Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.