Introduction to the SoFlow SO2 AIR MAX
This document provides comprehensive operating instructions for the SoFlow SO2 AIR MAX electric scooter. It covers everything from initial setup and safety guidelines to detailed explanations of controls, display functions, and app integration. Learn how to assemble, charge, and safely operate your SO2 AIR MAX for an optimal riding experience.
Discover essential care tips and advice to ensure the longevity and performance of your electric scooter. For further assistance or information, visit www.soflow.com or contact SoFlow at Info@soflow.com.
Getting Started
What's in the Box
Your SO2 AIR MAX package includes the scooter, a battery charging device, a user manual, a set of tools, and a gift card. Please check all items upon receipt and contact your authorized supplier immediately if anything is missing. It is recommended to keep the original packaging for warranty purposes.
Setting Up Your New Scooter
The SoFlow SO2 AIR MAX comes partially assembled. Follow these simple steps:
- Raise the stem: Lift the stem until it securely clips upright into the frame.
- Secure the latch: Ensure the latch mechanism is pulled down and clipped securely. Do not ride if the latch is loose.
- Charge the battery: Connect the charging cable to the charging port. The charger light will turn green when fully charged.
- Check tire pressure: Inflate tires according to the recommended pressure based on driver weight, as detailed in the manual.
For a visual guide, watch the SOFLOW video on setting up your e-scooter by scanning the provided QR code.
How to Use Your E-Scooter Safely
Riding Instructions
- Turn on the e-scooter by pressing the power button for 2 seconds.
- Lift the kickstand, place one foot on the footpad, and use the other foot to push off the ground.
- Once moving, press the throttle steadily to accelerate. The throttle engages at 3 km/h.
- Steer by turning the handlebars.
- Slow down using the brake lever, which activates both electrical rear and front drum brakes.
- To stop, slow down gradually and place one foot on the ground.
Handlebar Controls
Familiarize yourself with the handlebar controls, including the brake lever, throttle, buttons for lights and indicators, and the display.
Display Information
The display shows speed, speed units (mph/km/h), battery level, turning light indicators, and mode selection. Refer to the manual for a detailed explanation of all display icons.
Quick Tips to Get Going
- Use your right thumb for the throttle and your left hand for brakes and indicators.
- Double-press the power button to switch modes. Long-press the dedicated button for 'Long Drive Mode'.
- Push off the ground before pressing the throttle to activate the motor.
SOFLOW APP
Connect your Bluetooth-enabled SOFLOW SO2 AIR MAX to the iOS and Android app. Use your smartphone as a dashboard to monitor speed, battery level, and predicted range. Scan the QR code to download and install the SOFLOW APP, register or log in, and connect your scooter.
Essential Care Tips & Advice
- Tire Inflation: Keep tires properly inflated for fewer punctures and better performance.
- Battery Care: Charge the battery fully at least once a month.
- Safe Riding: Always wear a helmet, use lights and indicators, and adhere to local laws.
- Regular Maintenance: Follow the steps in this user manual for regular maintenance to prevent issues and maintain performance.
SoFlow Startseite - SoFlow
