Lutron Product Report Card
Manufacturer: EcoSmart
Model Number: BR40-1D 12WE26
Tested: BR40-1D 12WE26
Other Model Numbers: 1005956855, BR40-1D 12W E26 120V 3000K, BR40-1D 12W E26 120V 2700K, BR40-1D 12W E26 120V 5000K
Manufacturer's Description
Type of Device: LED 12 W BR40
Operating Voltage: 120 V
Input Power: 12 W
Input Current: 0.137 A
Input Frequency: 60 Hz
Control Type: Forward and Reverse Phase Control
Dimming Range: Not Specified
Output Power: Not Specified
Lumen Output: 985 lm
Type/Shape: BR40
Base Type: E26
Lutron Test Results
Date Tested: 07/20/2021
Test Voltage: 120 V
Test Notes: Test results valid only at 120V and 60 Hz.
Lutron Recommended Products
Lutron products not in this list can be considered to be not recommended, based on our testing.
| Product | Model Number | Control Type(1) | Fixtures per Dimmer(2) Min-Max |
Measured Dimming Range(3) (Software Trim Settings) Low End |
Measured Dimming Range(3) (Software Trim Settings) High End |
Perceived Low End(4) | Comments |
|---|---|---|---|---|---|---|---|
| Commercial Systems | |||||||
| Vive | MRF2S-6ELV | RP | 1 - 12 | 1% | 100% | 11% | |
| Vive | MRF2S-6CL | FP | 1 - 12 | 1% | 98% | 11% | |
| Vive | MRF2S-6ND | FP | 1 - 12 | 1% | 98% | 11% | |
| Panel Module | GP (Harrier) Card | FP | 1 - 122 | 1% | 100% | 9% | Rating is per output. Use load type 2-1. |
| Grafik QS/Wallbox Power Module | Grafik Eye QS Main Unit Family/LQRJ-WPM-6P | FP | 1 - 55 | 1% | 100% | 9% | Rating is per channel; total quantity per Main Unit is 137. |
| Grafik Eye 3000/HomeWorks QS | Grafik Eye 3000/HomeWorks QS | FP | 1 - 55 | 1% | 100% | 9% | |
| Panel Module | HW/LP-RPM-4U-120 | FP | 1 - 122 | 1% | 100% | 9% | Rating is per channel; total per module is 122. |
| Panel Module | HW/LP-RPM-4A-120 | FP | 1 - 84 | 1% | 100% | 9% | Rating is per channel; total per module is 134. |
| Panel Module | HW/LP-RPM-4A-120 | RP | 1 - 82 | 1% | 100% | 9% | Rating is per channel; total per module is 131. |
| HomeWorks QS/HomeWorks QSX | LQSE-4A-120-D, FP | FP | 1 - 12 | 1% | 100% | 10% | |
| HomeWorks QS/HomeWorks QSX DIN-Rail Power Module (120/277 V PRO LED+ Phase Adaptive) | LQSE-4A5-120-D (Zones 2-4 - Reverse-Phase) | RP | 1 - 34 | 1% | 100% | 9% | |
| HomeWorks QS/HomeWorks QSX DIN-Rail Power Module (120/277 V PRO LED+ Phase Adaptive) | LQSE-4A5-120-D (Zone 1 - Reverse-Phase) | RP | 1 - 54 | 1% | 100% | 9% | |
| HomeWorks QS/HomeWorks QSX DIN-Rail Power Module (120/277 V PRO LED+ Phase Adaptive) | LQSE-4A5-120-D (Zones 2-4 - Forward-Phase) | FP | 1 - 16 | 1% | 100% | 10% | |
| HomeWorks QS/HomeWorks QSX DIN-Rail Power Module (120/277 V PRO LED+ Phase Adaptive) | LQSE-4A5-120-D (Zone 1 - Forward-Phase) | FP | 1 - 33 | 1% | 100% | 10% | |
| Vive | RMJS-PNE-DV, RP | RP | 1 - 16 | 1% | 100% | 9% | |
| Vive | RMJS-PNE-DV, FP | FP | 1 - 16 | 1% | 99% | 10% | |
| Interfaces | |||||||
| Power Modules | PHPM-PA with GRAFIK Eye QS Main Unit | RP | 1 - 131 | 1% | 100% | 9% | |
| Power Modules | PHPM-WBXwith 3-wire fluorescent control | RP | 1 - 131 | 1% | 100% | 9% | |
| Residential Systems | |||||||
| RA2 Select/RadioRA 2/RadioRA 3 | RRD-PRO, FP, no neutral | FP | 1 - 20 | 1% | 99% | 12% | |
| HomeWorks QS/HomeWorks QSX | HQRx-PRO, FP, no neutral | FP | 1 - 20 | 1% | 99% | 12% | |
| RA2 Select/RadioRA 2/RadioRA 3 | RRD-PRO, FP, w/ neutral | FP | 1 - 20 | 1% | 99% | 12% | |
| HomeWorks QS/HomeWorks QSX | HQRx-PRO, FP, w/ neutral | FP | 1 - 20 | 1% | 99% | 12% | |
| HomeWorks QSX | RRST-PRO-N, FP | FP | 1 - 20 | 1% | 99% | 12% | |
| HomeWorks QSX | HRST-PRO-N, FP | FP | 1 - 20 | 1% | 99% | 12% | |
| RA2 Select/RadioRA 2/RadioRA 3 | RRD-PRO, RP, w/ neutral (default) | RP | 1 - 20 | 1% | 100% | 11% | |
| HomeWorks QS/HomeWorks QSX | HQRx-PRO, RP, w/ neutral (default) | RP | 1 - 20 | 1% | 100% | 11% | |
| RadioRA 3 | RRST-PRO-N, RP | RP | 1 - 20 | 1% | 100% | 11% | |
| HomeWorks QSX | HRST-PRO-N, RP | RP | 1 - 20 | 1% | 100% | 11% | |
| RA2 Select/RadioRA 2/RadioRA 3 | RRD-6CL (R3) | FP | 1 - 12 | 1% | 98% | 11% | |
| HomeWorks QS/HomeWorks QSX | HQRD-6CL (H2)/HQRA-6CL (H2) | FP | 1 - 12 | 1% | 98% | 11% | |
| RA2 Select/RadioRA 2/RadioRA 3 | RRD-10ND | FP | 1 - 12 | 1% | 98% | 11% | |
| HomeWorks QS/HomeWorks QSX | HQRD-6ND | FP | 1 - 12 | 1% | 98% | 11% | |
| HomeWorks | HxD-6ND | FP | 1 - 12 | 1% | 98% | 11% | |
| HomeWorks QS/HomeWorks QSX | HQRD-10ND | FP | 1 - 12 | 1% | 98% | 11% | |
| RadioRA 2/RadioRA 3 | Hybrid Keypad LED+ RRD-HN6BRL | FP | 1 - 8 | 1% | 98% | 11% | Installation with a neutral wire is required. |
| HomeWorks QS/HomeWorks QSX | Hybrid Keypad LED+ HQRD-HN6BRL | FP | 1 - 8 | 1% | 98% | 11% | Installation with a neutral wire is required. |
| Panel Module | GP (Harrier) Card | FP | 1 - 122 | 1% | 100% | 9% | Rating is per output. Use load type 2-1. |
| Grafik QS/Wallbox Power Module | Grafik Eye QS Main Unit Family/LQRJ-WPM-6P | FP | 1 - 55 | 1% | 100% | 9% | Rating is per channel; total quantity per Main Unit is 137. |
| Grafik Eye 3000/HomeWorks QS | Grafik Eye 3000/HomeWorks QS | FP | 1 - 55 | 1% | 100% | 9% | |
| Panel Module | HW/LP-RPM-4U-120 | FP | 1 - 122 | 1% | 100% | 9% | Rating is per channel; total per module is 122. |
| Panel Module | HW/LP-RPM-4A-120 | FP | 1 - 84 | 1% | 100% | 9% | Rating is per channel; total per module is 134. |
| Panel Module | HW/LP-RPM-4A-120 | RP | 1 - 82 | 1% | 100% | 9% | Rating is per channel; total per module is 131. |
| HomeWorks QS/HomeWorks QSX | LQSE-4A-120-D, FP | FP | 1 - 12 | 1% | 100% | 10% | |
| HomeWorks QS/HomeWorks QSX DIN-Rail Power Module (120/277 V PRO LED+ Phase Adaptive) | LQSE-4A5-120-D (Zones 2-4 - Reverse-Phase) | RP | 1 - 34 | 1% | 100% | 9% | |
| HomeWorks QS/HomeWorks QSX DIN-Rail Power Module (120/277 V PRO LED+ Phase Adaptive) | LQSE-4A5-120-D (Zone 1 - Reverse-Phase) | RP | 1 - 54 | 1% | 100% | 9% | |
| HomeWorks QS/HomeWorks QSX DIN-Rail Power Module (120/277 V PRO LED+ Phase Adaptive) | LQSE-4A5-120-D (Zones 2-4 - Forward-Phase) | FP | 1 - 16 | 1% | 100% | 10% | |
| HomeWorks QS/HomeWorks QSX DIN-Rail Power Module (120/277 V PRO LED+ Phase Adaptive) | LQSE-4A5-120-D (Zone 1 - Forward-Phase) | FP | 1 - 33 | 1% | 100% | 10% | |
| WallBox Dimmers | |||||||
| Standard 150W LED+ Dimmers | AYCL-153P, CTCL-153P, DVCL-153P, LECL-153P, SCL-153P, TGCL-153P | FP | 1 - 12 | 1% | 99% | 10% | |
| Diva/Ariadni 250W | 250W CL dimmers (T5,T8) | FP | 1 - 20 | 1% | 99% | 10% | |
| Nova T* 250W | NTCL-250 (T8) | FP | 1 - 20 | 1% | 99% | 10% | |
| Slide to-off 150W LED+ Dimmers | CTCL-150/LECL-150 | FP | 1 - 12 | 1% | 99% | 10% | |
| Dalia LED+ | RCL-153PNL | FP | 1 - 12 | 1% | 99% | 10% | |
| Caseta Wireless | PD-6WCL (SD12) | FP | 1 - 12 | 1% | 98% | 11% | |
| Caseta Wireless | PD-10NXD (SD12) without neutral | FP | 1 - 20 | 1% | 98% | 11% | |
| Maestro LED+ | MACL-153M (TX) | FP | 1 - 12 | 1% | 99% | 12% | |
| Sunnata LED+ | STCL-153 | FP | 1 - 12 | 1% | 99% | 12% | |
| Maestro Sensor | MSCL-OP153M (T2)/MSCL-VP153M (T2) | FP | 1 - 12 | 1% | 99% | 12% | |
| Maestro LED+ | MACL-LFQ | FP | 1 - 6 | 1% | 99% | 12% | |
| Diva/Skylark ContourReverse Phase LED Preset Dimmers | DVRP-253PCTRP-253P | RP | 1 - 20 | 1% | 91% | 11% | |
| Nova T*Reverse Phase LEDSlide to-off Dimmer | NTRP-250 | RP | 1 - 20 | 1% | 91% | 11% | |
| Maestro PRO LED+ | MA-PRO, FP, no neutral | FP | 1 - 20 | 1% | 99% | 12% | |
| Maestro PRO LED+ | MA-PRO, FP, w/ neutral | FP | 1 - 20 | 1% | 99% | 12% | |
| Sunnata PRO LED+ | ST-PRO-N, FP | FP | 1 - 20 | 1% | 99% | 12% | |
| Maestro PRO LED+ | MA-PRO, RP, w/ neutral (default) | RP | 1 - 20 | 1% | 100% | 11% | |
| Sunnata PRO LED+ | ST-PRO-N, RP | RP | 1 - 20 | 1% | 100% | 11% | |
| Caseta WirelessPhase Selectable | PD-5NE | RP | 1 - 20 | 1% | 100% | 11% | |
| Grafik T | Phase Selectable GT-5NEM/GTJ-5NEM | RP | 1 - 20 | 1% | 100% | 11% |
Notes:
- Identical model numbers with different compatibility codes may have different performance; (_) means there is no compatibility code assigned; contact technical support for additional information.
- (1) Control types of FP and RP represent Forward Phase and Reverse Phase, respectively. See product literature for details.
- (2) Maximum Fixtures per Dimmer value represents the maximum safe loading of the control.
- (3) Values are based on light output using the specified dimming control, and may not be an indication of the fixture's full rated capability. Values are set to optimize performance, such as reducing dead travel, ensuring that fixtures turn on at low end, reducing turn-on time at low end, and trimming out instability. Software trim values are indicated in parentheses when applicable.
- (4) Perceived light level percentage is the square root of the measured light level percentage, per IESNA Lighting Handbook.
- (5) Interfaces have been tested with the listed control; any compatible dimmer may be used instead, but high end/low end light levels may vary slightly.
Contact Information
For any questions on this report, please contact the Lutron LED Center of Excellence at 877-DIM-LED8 or leds@lutron.com.
This information was posted with the consent and cooperation of the device manufacturer. Please be aware that device manufacturers may modify their product at any time, without notice to Lutron, and therefore Lutron cannot ensure future compatibility. For more detailed and up to date fixture specifications, performance and/or any related recall information, visit the manufacturer's website. The latest Lutron test results can always be found at www.lutron.com/LEDtool.
