STEG ST10 Subwoofer Speaker System Owner's Manual
Introduction
Thank you for purchasing a STEG Subwoofer Speaker. It is a state-of-the-art product specifically designed and engineered for vehicle use, and has been thoroughly tested to ensure consistent and reliable performance.
Should you have any questions regarding the installation or operation of your STEG Subwoofer Speaker, which are not answered in this manual, please contact your dealer for assistance.
Features
- 10" Subwoofer Speaker
- Rms.Power: 200W
- Aluminum alloy bracket
- Special glass fiber basin with rubber edge
- 2 ohm 2" Aluminum Voice Coil
- 53.4 Oz Magnet Structure
Precautions
- Before making holes, check the mounting space with supplied template.
- To prevent noise pick-up, keep the wiring away from motors, high-voltage leads and other potential noise sources.
- To prevent a short-circuit, keep all wiring away from moving parts and sharp edges.
- Make sure you carefully read and understand the installation instructions before installing this subwoofer in your vehicle.
Specifications
| Specification | ST10 |
|---|---|
| Rms.Power (W) | 200 |
| Fo (Hz) | 26 |
| Nominal Impedance (Ω) | 2 |
| Sensitivity@1w/1m (dB) | 84.5 |
| Frequency Range | 26Hz~1KHz |
| Magnet | 53.4 Oz |
| Voice Coil | 2" |
| Cone | Rubber rimmed glass fiber basin |
| Mounting Depth (mm) | 110 |
| Mounting Diameter (mm) | 232 |
