KDS Interactive Display

Product Models

KDS offers interactive displays in various sizes:

• 18.5" (1920x1080px) - Model: F9J2A
• 22" (1920x1080px) - Model: F962A
• 27" (1920x1080px) - Model: F9E2A

Connecting the Power Cord

Portrait Version: Remove rear shell 1, then insert the power cord according to method A.

Landscape Version: Remove rear shell 1 and rear shell 2, then insert the power cord according to method B.

Powering On/Off

1. Connect the Power Cord: Insert the adapter plug into the AC socket to power up the device.

2. Turn Off & Turn On:

• When the device is on, press and hold the power button for 2-3 seconds to power off or reboot.
• If the device crashes, press and hold the power button for 11 seconds to power it off.
• When the device is off, press the power button briefly to boot it up.

Network Settings

Wi-Fi Setting

• Click the "Setting" button, enable WLAN, and enter the WLAN search interface to wait for available hotspots.
• Click on the desired WLAN. If it's an encrypted network, you will need to enter the access password to connect.

Stand Accessories (Optional)

A. Articulating Arm Stand

These bracket accessories mount via the standard VESA interface on the back of the main display.

Standard VESA (100*100mm): Install with M4 screws (4 pieces).

Points for Attention

Safety Warning

• Insert the AC plug into the AC socket corresponding to the power adapter's input voltage.
• Do not use in environments with potential explosive gases.
• Non-professionals should not dismantle the power adapter.
• Operating temperature: 0°C - 40°C. Storage temperature: -20°C - 60°C.
• Suitable for use at altitudes up to 5000 meters.
• Not suitable for locations where children are likely to be present.

Important Safety Instructions

• Avoid installation or use during lightning storms to prevent electrical shock.
• If you notice unusual odor, overheating, or smoke, immediately cut off the power supply.

Disclaimer

Details in this document may differ from the actual product due to updates. SUNMI owns the interpretation rights and reserves the right to modify this guide without prior notice.

Declaration

The company is not responsible for:

• Damage from use and maintenance not following guide instructions.
• Damage from alternative or consumable parts not provided by the company.
• Product modifications or changes made without company consent.
• Issues arising from using third-party ROM systems or modified system files, which may lead to instability and safety risks.

Suggestions

• Avoid use near water or in humid environments.
• Do not use in extreme cold or hot environments (e.g., near ignition sources).
• Do not drop, throw, or bend the device.
• Do not use near medical facilities without permission.
• Use in a clean, dust-free environment to prevent small items from entering the terminal.

Battery Replacement

• Using the wrong battery may cause explosion.
• Dispose of replaced batteries through maintenance personnel; do not incinerate.
• Do not attempt to disassemble the device or replace the battery yourself.
• For battery service, contact SUNMI or an authorized service provider.
• This product may contain a coin/button cell battery. Ingestion can cause severe internal burns. Keep batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• Seek immediate medical attention if batteries are swallowed or placed inside the body.

App/Software

Use the POS terminal for customer payments in various retail and restaurant settings. Connect to a network to access the App Store for relevant applications.

• Check App Details: Navigate to "Setting -> App" and select the app name.
• Uninstall Apps: Go to "Setting -> App -> Manage App" or drag the app icon to the trash.

Usage Scenarios

Suitable for self-ordering, self-checkout, KDS (Kitchen Display Systems), ESOP (Electronic Sell-Out Platforms), self-service, information inquiries, and more.

Technical Specifications

Compliance Information

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference, and acceptance of any received interference.

This equipment has been tested and complies with Class B digital device limits, designed for reasonable protection against harmful interference in residential installations. It generates, uses, and radiates radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. If interference occurs, users are encouraged to:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect to a different circuit outlet.
• Consult a dealer or experienced technician.

Caution: Unauthorized modifications may void the user's authority to operate the equipment.

ISED Canada Compliance Statements

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to two conditions: no interference, and acceptance of any interference.

This Class B digital apparatus complies with Canadian ICES-003.

Operation in the 5150-5250 MHz band is restricted to indoor use to reduce potential interference with mobile satellite systems.

EU Regulatory Conformance

Shanghai Sunmi Technology Co., Ltd. declares that this device complies with the essential requirements of Radio Equipment Directive 2014/53/EU. The full EU declaration of conformity is available at: https://developer.sunmi.com/docs/read/en-US/maaeghjk480

UK PSTI SOC Website: https://developer.sunmi.com/docs/read/en-US/xcdaeghjk480

Information About the Software

Software descriptions and accessory information can be found in the EU declaration of conformity at the provided internet address.

Restrictions of Use

This product may be used in European member states with restrictions. For products operating in the 5.150 to 5.350 GHz frequency band, wireless access systems (WAS), including RLANs, are restricted to indoor use.

WEEE Recycling: This symbol indicates that the product should not be disposed of with household waste. At the end of its life cycle, it should be taken to designated collection points or returned to the distributor. Contact local authorities for more information on WEEE recycling.

RF Exposure Statement (SAR)

This equipment complies with EU, FCC, and IC RSS-102 radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Energy Start® Certification

The device automatically enters display sleep mode after 10 minutes of inactivity. Auto screen off settings comply with ENERGY STAR® for energy savings.

Manufacturer Information

Manufacturer: Shanghai Sunmi Technology Co., Ltd.

Address: Room 505, No. 388, Song Hu Road, Yang Pu District, Shanghai, China

Website: www.sunmi.com

Hotline: 400-6666-509