LED Video Desk Light User Manual
Specifications
| Power | 38W |
| Input voltage AC | 110V/240V, 50Hz/60Hz |
| Adjustment range | 10% - 100% (5 gear dimming) |
| CRI | RA>95 |
| CCT | 3200K/4000K/5500K |
| LED number | 192pcs |
| Height adjustment | 17.7-26.3in |
Product Components
The product includes the following components:
- ① Video Light Panel: The main light source.
- ② 360° Ball Head: Allows for flexible positioning of the light panel.
- ③ Power Adapter: Connects the light to a power source.
- ④ Remote Control: Used to operate the light's functions.
- ⑤ Clamp Stand: The main support structure that attaches to a surface.
- ⑥ Clamp: A C-clamp designed to fit tables less than 3.4 inches thick.
- ⑦ Phone Holder: An attachment for holding a smartphone.
Installation Guide
Follow these steps to install the light:
- Step 1: Tighten the clamp onto the desired surface (e.g., a desk).
- Step 2: Connect the clamp stand to the tightened clamp.
- Step 3: Attach the 360° ball head to the clamp stand.
- Step 4: Connect the video light panel to the ball head. This can be done horizontally or vertically using the two-hole mounting system.
- Step 5: Adjust the angle of the light panel by rotating the ball head.
- Step 6: Connect the power adapter to the light panel and plug it into a power outlet.
Controller Adjustment Instruction
The remote control allows for various adjustments:
- Power Button: Turns the light on/off.
- Brightness +/-: Adjusts the light intensity.
- Color Temperature +/- (CT-, CT+): Modifies the color temperature of the light.
- Auxiliary Button: Cycles through different lighting modes, including RGB mode and special effects like glitter and gradients. To switch modes, press and hold the button for 3 seconds, then click again.
- Night Light: A separate function for low-level lighting.
The light panel itself has a power button for direct control.
Function Description
For increased brightness, turn the main switch to the ON position and open the protective cover.
Caution: Do not look directly at the exposed lamp with your eye.
The light panel features a dense array of 192 LEDs.
Product Troubleshooting
| Problems | How to Solve |
|---|---|
| Light cannot turn on | Reconnect charging cable or adapter. Ensure the power plug and light connector are tightly inserted. Verify the power input voltage. |
| Lights are flickering | Remove nearby objects that generate high heat. |
| Phone holder is unstable | Check if the connection is loose and tighten it securely. |
Cautions
- Please use the product within the specified rated voltage.
- Do not pull the cable or touch the plug with wet hands, especially when the power is turned off.
- When you stop using the product, please disconnect the power to prevent short-circuit.
