PNi IP60 Live PTZ Video Surveillance Camera User Manual

User Manual for PNi models including: IP60 Live PTZ Video Surveillance Camera, Live PTZ Video Surveillance Camera, PTZ Video Surveillance Camera, Video Surveillance Camera, Surveillance Camera, Camera

[PDF] PNI IP60 2MP 4G PTZ SOLARwww.mypni.eu › products › manuals

PNI IP60 2MP 4G PTZ SOLAR

29 ago 2022 — 4G and LAN connection (RJ45 connector). • Recording on micro SD card, max. 128 GB (card not included). • Two-way audio communication (built-in microphone ...

PNI IP60 2MP 4G PTZ SOLAR - mypni.eu

User anual 4 English Camera installation and connection details Warning: the SIM card with 4G mobile data must not have the PIN code activated. Insert the SIM card with mobile data into a mobile phone, disable the security PIN and check if mobile data is available by accessing any web

File Info : application/pdf, 32 Pages, 3.33MB

PNI-IP60L

PNI IP60 2MP 4G PTZ SOLAR
Video surveillance camera Camera supraveghere video

EN User manual ...............................................

RO Manual de utilizare ....................................

English

Main features
· 4G and LAN connection (RJ45 connector) · Recording on micro SD card, max. 128 GB (card not included) · Two-way audio communication (built-in microphone and speaker) · Outdoor mounting, waterproof class IP66, ABS housing · 4 IR LEDs for night vision up to 20 m · 4 white LEDs for additional lighting · P2P connection for remote monitoring · Remote control through the CamHi application (Android / iOS) and
through the HiP2P Client application (PC Windows)
Package contents
· Surveillance camera · Solar panel · Installation bracket for wall or pole · 12V 20A rechargeable Li-Ion battery (built into the main support) · 230V - 12.6V / 5A Power adapter for charging the Li-Ion battery
Connections

1. 12V power connector - insert the power cable from the included battery. 2. RJ45 connector - insert a network cable to connect the camera to the
router (if necessary during the first configuration) 3. Reset - long press to reset the camera to default settings.

User manual

English

Camera installation and connection details
Warning: the SIM card with 4G mobile data must not have the PIN code activated. Insert the SIM card with mobile data into a mobile phone, disable the security PIN and check if mobile data is available by accessing any web page.
1. Open the cover on the back of the camera. Install the Nano SIM card and the micro SD card (maximum 128 GB) into the camera.

2. Connect the power adapter from the battery to the camera.

3. Connect the solar panel to the battery.

User manual

English

4. Turn on the battery power using the red round switch:

5. The camera will start rotating and initializing. When the camera stops rotating, it is ready for configuration.
Note: Before use, we recommend that you fully charge the battery for about 8 hours using the power supply in the package. Connect the power supply to the black connector with the rubber cap.
6. Information about the battery is provided by the 3 LEDs located on the installation support.

Left LED Charging On: solar charging Off: not charging (lack of sun)

Central LED
Battery
Flashing Red: Battery 25% Flashing Red and Green: Battery 50% Flashing Green: Battery 75% Green On: Battery 100%

Right LED Output status On: active output Off: no output

User manual

English

Add the camera to the mobile application Quick setup mode
Download and install the CamHi application by scanning the codes below:

Android

iOS

1. Open the application, create an account and connect. 2. Press Add camera. 3. In the following interface, you have several options to add the camera: · Manually enter the UID of the camera, the user and the password
(you can find these data on the label stuck on the camera). The default username and password are admin, admin. · Scan the QR code on the label stuck on the camera (Scan QR code, add UID) 4. After you have successfully added the camera, click on the camera in the list to view the images taken by it in real time.

Note: The camera status must be Online. If the camera is Offline, access the Advanced configuration mode from the next page.

User manual

English

Add the camera to the application via the Local Network Advanced configuration mode

Connect both the phone (via wireless) and the camera (via RJ45 network cable) to the same local network, Port 1 of the routeri.
Warnings: · Make sure the phone is connected to the same router with the camera. · Check if the LAN port in the router to which the camera will be connected
has access to the network/internet. Use a laptop or computer connected to this port. The green network indicator means there is a connection.

This procedure allows you to add, check access and configure the camera from the "CamHi" smartphone application or the "HiP2P Client" PC / Laptop (Windows) application from your local network. This will help you check: - the status and settings of the camera - the status and settings of the 4G GSM network

User manual

English

Configuration and viewing of the camera on the mobile phone
1. Press the Add Camera menu in the mobile application 2. Search for the camera in the local network: press Search Camera from
LAN 3. One result: the camera ID will appear on the screen. Click on the result,
rename it, enter the password and complete the procedure. 4. After you have successfully added the camera, press and access the
camera from the list to view the images in real time (for the moment only from the local network). 5. Continue to check and configure the GSM 4G connection.
Note: The default camera username is admin and the default password is admin. For security reasons, the camera will ask you to change the password. and set the correct time zone.

Note: If the camera search procedure in the network fails, check the LAN cable and make sure that you have access to the network on the LAN port to which the camera is connected.

Connect the camera to the 4G mobile data network

1. Press the icon next to the camera that needs to be configured.Note: The camera status must be Online.
2. From the settings menu, select 4G Settings. 3. If the name of the network operator is correct, the signal is greater than
60 and the APN is correct, go to step 5 and wait about 5 minutes for the camera to connect. For Vodafone, we recommend that you ask for the APN from the operator and fill it in manually. Suggested APN: live. vodafone.com 4. If the camera status is not Online after 5 minutes, check: · The name of the network operator of the SIM card in the "4G settings" menu. If it is not available:

User manual

English

· check the SIM card and remove the PIN code (in a phone); · check if the SIM card is 4G compatible and has active mobile data (in a
phone). · check the signal strength: it must be greater than 60. If not, move the
camera to a place with a better signal. · check the status with another SIM card from the same operator or
another operator (without active PIN code) · The status LEDs next to the SIM card: the 2 rear LEDs are lit and the
front one flashes when the camera is connected to the Internet. · In the "4G settings" "Status Code" menu: "0" sim not connected (check/
reinsert SIM, check signal); "1" successful connection; "2" - failed connection to the network. · check the APN in the APN Mode menu. Set to Manual and manually enter only the correct APN obtained from the SIM card operator and save the settings.

5. Disconnect the LAN cable between the camera and the local network router and restart the camera (disconnect the power). Open the application and check the camera status in about 5 minutes. If everything

User manual

English

is OK, the camera will be online and you can remotely access the live images.
Configuration of recordings on the micro SD card
1. Purchase and install a micro SD card of maximum 128Gb in the camera. 2. Launch the mobile application, click on the icon next to the camera
that needs to be configured.Note: The camera status must be Online. 3. From the displayed settings menu, select Action with alarm. 4. Activate the Alarm SD REC option. 5. Return to the main menu and select the SD Card setting option to check
the available space on the card. 6. Make sure that the Enable Record option is activated in the Recording
Schedule menu
Note: If the micro SD card installed in the camera has a reduced capacity, we recommend that you activate the recording only when motion is detected. For this, access the menu Alarm settings - Motion detection.

User manual

English

7. To view the recordings from the micro SD card installed in the camera, press the video option from the bottom of the main application interface. Select the camera and the file you want to play or download.
Note: Detailed instructions about the CamHi application can be found on The CD in the package or on the product web page in the download section (www.pni.ro).
Configure and view the camera on the computer
Your camera can be accessed from your computer in two ways: through the Internet Explorer browser or through the HiP2P Client application for Windows.
Note: The camera must have been initially configured and appear online in the mobile application or must be connected to the same local network as the computer.
Access the camera through Internet Explorer
1. Install the Search Tool application (the installation file can be found on 2. The CD in the package or on the product web page in the download
section (www.pni.ro). 3. Connect your computer and camera to the same router. 4. Launch the Search Tool application and press Refresh to search and find
the camera connected in the same local network. 5. From the displayed list, identify your camera by UID (see camera label).

User manual

English

6. Press Next to configure the network parameters. You can enter the network parameters manually or you can check the DHCP option. Press Next.

7. Open Internet Explorer and enter the IP of the camera in the address bar or return to the list of cameras in the Search Tool application and double-click on the camera you want to view. It will open automatically in Internet Explorer.
8. From Internet Explorer you can view live images taken by the camera, you can play the recordings saved on the micro SD card installed in the camera and you can make various settings related to the network, video, audio and alarm.

User manual

English

Note: You can access the camera in Internet Explorer only if you are connected to the same network as the camera. If you want to access the camera from your computer, but from another network, install the dedicated HiP2P Client application.

Access the camera through the HiP2P Client application (Windows)

1. Install the HiP2P application on your computer (the installation file can be

found on the CD in the package or on the product web page in the download

section (www.pni.ro)

2. Launch the application, access the Config menu, select or add the new area

User manual

(Add Area) and add the camera using the UID ID on the camera label or on the phone, if it is already added. (Input UID) or looking for the camera connected in the same network as the computer: press Search.

English

Note: Detailed instructions about the HiP2P application can be found in the Download section of the product web page or from the software download link at the end of the user manual.
Installation of the battery support and the solar panel
Follow the following steps to connect the solar panel, the battery holder and the surveillance camera. The support has 2 adjustable joints that allow you to orient the solar panel towards the sun.
Install the solar panel on the support Connect the first joint using the 4 using the 4 screws and nuts from the screws and nuts from the box box

User manual

English

Connect the second joint using Connect the camera to the support

the 3 dedicated screws in the box using the 4 dedicated screws in the

(one bigger and 2 smaller)

box.

Techical specifications

Camera Sensor Sensor resolution Registration resolution
Lux
Video compression Audio compression Lens / Zoom Ethernet
GSM network
IR LEDs White LEDs Motion detection Card slot P2P connection App Supply voltage

F23 CMOS 2MP 1920 x 1080 / 1-30 fps Color: 0.1Lux @(F1.2,AGC ON); 0 Lux with IR, Black/White 0.01 Lux @ (F1.2,AGC ON),0 Lux with IR H.264 AMR/G.711A 2.8-12mm / 5X Zoom Optic 10/100 Mbps RJ45 4G GSM Nano SIM Frequency 900/1800 MHz 4 pcs. night vision up to 20 m 4 pcs. for additional night lighting Yes + Human detection Micro SD, max. 128Gb Yes CamHi (Adroid/iOS) / HiP2P (Windows) 12V / 2A

User manual

English

Dimensions

192 x 70 x 70 mm

Waterproof

IP66

Housing

ABS

Working temperature -26°C ~ +80°C / 80%RH

Li-Ion battery

Capacity / Voltage

20 A / 12 V

Solar panel

Power/Voltage/Current 60W (max) / 15V ( Vmp) / 4A (Imp)

Charging

Solar charger

PWM model

230V charger

12.6 V 5A dedicated for Li-Ion battery

User manual

Romana

Caracteristici de baza
· Conectare 4G si LAN (conector RJ45) · Inregistrare pe card micro SD, max. 128 GB (cardul nu este inclus) · Comunicare audio bidirectionala (microfon si difuzor incorporate) · Montaj la exterior, clasa de protectie IP66, carcasa ABS · 4 LED-uri IR pentru vizualizare nocturna pana la 20 m · 4 LED-uri albe pentru iluminare suplimentara · Conexiune P2P pentru monitorizare de la distanta · Control de la distanta prin aplicatia CamHi (Android / iOS) si prin aplicatia
HiP2P Client (PC Windows)
Continutul pachetului
· Camera de supraveghere · Panou solar · Suport de instalare pe perete sau stalp · Baterie reincarcabila Li-Ion 12V 20A integrata in suport · Alimentator 230V - 12,6V / 5A dedicat incarcarii bateriei Li-Ion
Conexiuni

1. Conector de alimentare 12V - introduceti cablul de alimentare de la acumulatorul inclus.
2. Conector RJ45 - introduceti un cablu de retea pentru a conecta camera la router (daca este necesar la prima configurare).
3. Reset -apasati lung pentru a reveni la setarile din fabrica.

Manual de utilizare

Romana

Instalarea camerei si detaliere conexiuni
Avertisment: cartela SIM cu date mobile 4G nu trebuie sa aiba codul PIN activat. Introduceti cartela SIM cu date mobile intr-un telefon mobil, dezactivati codul PIN de securitate si verificati daca datele mobile sunt disponibile accesand orice pagina de internet.
1. Deschideti capacul din partea din spate a camerei. Instalati cartela Nano SIM si cardul micro SD (maxim 128 GB) in camera.

2. Conectati adaptorul de alimentare de la baterie la camera

3. Conectati panoul solar la baterie

Manual de utilizare

Romana

4. Porniti alimentarea de la baterie folosind comutatorul rotund rosu:

5. Camera va incepe rotirea si initializarea. Cand camera se opreste din rotire este gata pentru configurare.
Nota: Inainte de utilizare, va recomandam sa incarcati complet bateria timp de aproximativ 8 ore cu ajutorul alimentatorului din pachet. Conectati alimentatorul la conectorul negru cu capac din cauciuc.
6. Informatiile despre baterie sunt furnizate de cele 3 LED-uri situate pe suportul de instalare.

LED Stanga Incarcare Aprins: Incarcare solara Stins: Nu incarca (lipsa soare)

LED Central
Baterie
Clipeste Rosu: Acumulator 25% Clipeste Rosu si Verde: Acumulator 50% Clipeste Verde: Acumulator 75% Verde Aprins: Acumulator 100%

LED Dreapta Stare Iesire Aprins: Iesire activa Stins: Iesire oprita

Manual de utilizare

Romana

Adaugati camera in aplicatia mobila Mod rapid de configurare
Descarcati si instalati aplicatia CamHi scanand codurile de mai jos:

Android

iOS

1. Deschideti aplicatia, creati un cont si conectati-va. 2. Apasati Add camera. 3. In interfata urmatoare, aveti mai multe optiuni pentru a adauga camera: · Introduceti manual UID-ul camerei, utilizatorul si parola (gasiti aceste
date pe eticheta lipita pe camera). Numele de utilizator si parola implicite sunt admin, admin. · Scanati codul QR de pe eticheta lipita pe camera (Scan QR code, add UID) 4. Dupa ce ati adaugat cu succes camera, apasati pe camera din lista pentru a vizualiza imaginile realizate de aceasta in timp real.

Nota: Starea camerei trebuie sa fie Online. Daca camera este Offline, accesati Modul de configurare avansat de la pagina urmatoare.

Manual de utilizare

Romana

Adaugare camera in aplicatie prin Reteaua Locala Mod de configurare avansat

Conectati atat telefonul (prin wireless) cat si camera (prin cablu de retea RJ45) la aceeasi retea locala, Portul 1 al router-ului.
Avertizari: · Asigurati-va ca telefonul este conectat la acelasi router prin wireless. · Verificati daca portul LAN din router la care va fi conectata camera are
acces la retea/internet. Utilizati un laptop sau un computer conectat la acest port. Indicatorul de retea verde inseamna ca exista conexiune.

Aceasta procedura va permite sa adaugati, sa verificati accesul si sa configurati camera din aplicatia pentru smartphone ,,CamHi" sau din aplicatia pentru PC / Laptop (Windows) ,,HiP2P Client" din reteaua dvs. locala. Acest lucru va ajuta sa verificati: - starea si setarile camerei - starea si setarile retelei 4G GSM

Manual de utilizare

Romana

Configurare si vizualizare camera pe telefonul mobil
1. Apasati meniul Add Camera in aplicatia de mobil 2. Cautati camera in reteaua locala: apasati Search Camera from LAN 3. Un rezultat: ID-ul camerei va aparea pe ecran. Apasati pe rezultat,
redenumiti, introduceti parola si finalizati procedura. 4. Dupa ce ati adaugat cu succes camera, apasati si accesati camera din lista
pentru a vizualiza imaginile in timp real (pentru moment doar din reteaua locala). 5. Continuati pentru a verifica si configura conexiunea GSM 4G.
Nota: Numele de utilizator implicit al camerei este admin, iar parola implicita este admin. Din motive de securitate camera va va cere sa schimbati parola. si sa setati fusul orar corect.

Nota: Daca procedura cautare camera in retea esueaza, verificati cablul LAN si asigurati-va ca aveti acces la retea pe portul LAN la care este conectata camera.

Conectare camera la reteaua de date mobile 4G

1. Apasati pe pictograma asociata camerei ce trebuie configurata Nota: Statusul camerei trebuie sa fie Online.
2. Din meniul de setari afisat, selectati 4G Settings. 3. Daca numele operatorului de retea este corect, semnalul este mai mare
de 60 si APN-ul este corect, treceti la pasul 5 si asteptati aproximativ 5 minute pentru conectarea camerei. Pentru Vodafone va recomandam sa cereti APN-ul de la operator si sa il completati manual. APN sugerat: live. vodafone.com 4. Daca statusul camerei nu este Online dupa 5 minute, verificati: · Numele operatorului de retea al cartelei SIM in meniul "4G settings". Daca nu este disponibil: · verificati cartela SIM si eliminati codul PIN (intr-un telefon); · verificati daca cartela SIM este compatibila 4G si are date mobile active

Manual de utilizare

Romana

(intr-un telefon). · verificati puterea semnalului: trebuie sa fie mai mare de 60. Daca nu,
mutati camera intr-un loc cu semnal mai bun. · verificati starea cu o alta cartela SIM de la acelasi operator sau de la alt
operator (fara cod PIN activ) · LED-urile de stare de langa cartela SIM: cele 2 LED-uri din spate sunt
aprinse iar cel din fata clipeste cand camera este conectata la internet. · In meniul "4G settings" "Status Code": "0" SIM neconectat (verificati/
reintroduceti SIM, verificati semnal); "1" conectare cu succes; "2" conectare nereusita la retea. · verificati APN-ul in meniul APN Mode. Setati pe Manual si Introduceti manual doar APN-ul corect obtinut de la operatorul cartelei SIM si salvati setarile.

5. Deconectati cablul LAN intre camera si routerul de retea locala si reporniti camera (deconectati alimentarea). Deschideti aplicatia si verificati starea camerei in aproximativ 5 minute. Daca totul este OK, camera va fi online si puteti accesa de la distanta imaginile live.

Manual de utilizare

Romana

Configurare inregistrari pe cardul micro SD
1. Achizitionati si instalati in camera un card micro SD de maximum 128Gb. 2. Lansati aplicatia mobila, faceti click pe pictograma din dreptul
camerei pe care doriti sa o configurati. Nota: Statusul camerei trebuie sa fie Online. 3. Din meniul de setari afisat, selectati Action with alarm. 4. Activati optiunea Alarm SD REC. 5. Reveniti la meniul principal si selectati optiunea SD Card setting pentru a verifica spatiul disponibil pe card. 6. Asigurati-va ca in meniu Recording Schedule optiunea Enable Record este activata.
Nota: In cazul in care cardul micro SD instalat in camera are o capacitate redusa, va recomandam sa activati inregistrarea numai la detectarea miscarii. Pentru aceasta, accesati meniul Alarm settings - Motion detection.

7. Pentru a vizualiza inregistrarile de pe cardul micro SD instalat in camera, apasati optiunea video din partea de jos a interfetei principale a

Manual de utilizare

Romana

aplicatiei. Selectati camera si fisierul pe care doriti sa il redati sau sa il descarcati.
Nota: Instructiuni detaliate despre aplicatia CamHi pot fi gasite pe CD-ul din colet sau pe pagina web a produsului in sectiunea download (www. pni.ro).
Configurati si vizualizati camera pe computer
Camera dvs. poate fi accesata de pe computer in doua moduri: prin browserul Internet Explorer sau prin aplicatia pentru Windows HiP2P Client.
Nota: Camera trebuie sa fi fost configurata initial si sa apara online in aplicatia de mobil sau trebuie sa fie conectata la aceeasi retea locala cu computerul.
Accesare camera prin Internet Explorer
1. Instalati aplicatia Search Tool (fisierul de instalare poate fi gasit pe CD-ul din colet sau pe pagina web a produsului in sectiunea download (www.pni.ro).
2. Conectati computerul si camera dvs. la acelasi router. 3. Lansati aplicatia Search Tool si apasati pe Refresh pentru a cauta si gasi
camera conectata in aceeasi retea locala. 4. Din lista afisata, identificati camera dvs. dupa UID ( vezi eticheta camerei).

Manual de utilizare

Romana

5. Apasa Next pentru a configura parametrii de retea. Puteti introduce parametrii de retea manual sau puteti verifica optiunea DHCP. Apasa Next.
6. Deschide Internet Explorer si introdu in bara de adrese IP-ul camerei sau reveniti la lista camerelor din aplicatia Search Tool si faceti dublu click pe camera pe care doriti sa o vizualizati. Se va deschide automat in Internet Explorer.
7. Din Internet Explorer puteti vizualiza imagini live realizate de camera, puteti reda inregistrarile salvate pe cardul micro SD instalat in camera si puteti efectua diverse setari legate de retea, video, audio si alarma.

Manual de utilizare

Romana

Nota: Puteti accesa camera in Internet Explorer numai daca sunteti conectat la aceeasi retea cu camera. Daca doriti sa accesati camera de pe computer, dar din alta retea, instalati aplicatia dedicata HiP2P Client.
Accesati camera prin aplicatia HiP2P Client (Windows)
1. Instalati in computer aplicatia HiP2P (fisierul de instalare poate fi gasit pe CD-ul din colet sau pe pagina web a produsului in sectiunea download (www. pni.ro)
2. Lansati aplicatia, accesati meniul Config, selectati sau adaugati zona noua (Add Area) si adaugati camera utilizand ID-ul UID de pe eticheta camerei sau de pe telefon, daca este deja adaugat. (Input UID) sau cautand camera conectata in aceeasi retea cu calculatorul: apasati Search.

Manual de utilizare

Romana

Nota: Instructiunile detaliate despre aplicatia HiP2P pot fi gasite in sectiunea Descarcare de pe pagina web a produsului sau de pe linkul de descarcare a software-ului de la sfarsitul manualului de utilizare.

Instalarea suportului bateriei si a panoului solar

Urmati pasii urmatori pentru a conecta panoul solar, suportul cu bateria si camera de supraveghere. Suportul are 2 imbinari/articulatii reglabile care va permit sa orientati panoul solar catre soare.

Instalati panoul solar pe suport folosind Conectati prima articulatie folosind

cele 4 suruburi cu piulita din cutie

Conectati a doua articulatie folosind Conectati camera la suport folosind cele 3 suruburi dedicate din cutie cele 4 suruburi dedicate din cutie. (unul mai mare si 2 mai mici)

Manual de utilizare

Specificatii tehnice

Romana

Camera Senzor Rezolutie senzor Rezolutie inregistrare
LUX
Compresie video Compresie audio Lentila / Zoom Ethernet
Retea GSM
LED-uri IR LED-uri albe Detectie miscare Slot Card Conexiune P2P Aplicatie dedicata Tensiune alimentare Dimensiuni Grad de protectie Carcasa Temperatura lucru Acumulator Li-Ion Capacitate / Voltaj Panou Solar Putere/Voltaj/Curent Incarcare Incarcator Solar Incarcator 230V
29

F23 CMOS 2MP 1920 x 1080 / 1-30 fps Color: 0.1Lux @(F1.2,AGC ON); 0 Lux cu IR, Alb/Negru 0.01 Lux @ (F1.2,AGC ON),0 Lux cu IR H.264 AMR/G.711A 2.8-12mm / 5X Zoom Optic 10/100 Mbps RJ45 4G GSM Nano SIM Frecventa 900/1800 MHz 4 buc. vizualizare nocturna pana la 20 m 4 buc. pentru iluminare nocturna suplimentara Da + Detectie silueta umana Micro SD, max. 128Gb Da CamHi (Adroid/iOS) / HiP2P (Windows) 12V / 2A 192 x 70 x 70 mm IP66 ABS -26°C ~ +80°C / 80%RH
20 A / 12 V
60W (max) / 15V ( Vmp) / 4A (Imp)
Model PWM 12.6 V 5A dedicat pentru bateria Li-Ion
Manual de utilizare

EN: EU Simplified Declaration of Conformity SC ONLINESHOP SRL declares that Video surveillance camera PNI House IP60 complies with the Directive EMC 2014/30/EU, RED 2014/53/ UE and LVD 2014/35/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://www.mypni.eu/products/7893/download/certifications
RO: Declaratie UE de conformitate simplificata SC ONLINESHOP SRL declara ca Camera supraveghere video PNI House IP60 este in conformitate cu Directiva EMC 2014/30/EU, Directiva RED 2014/53/UE si Directiva LVD 2014/35/EU. Textul integral al declaratiei UE de conformitate este disponibil la urmatoarea adresa de internet: https://www.mypni.eu/products/7893/download/certifications

References

Adobe PDF Library 16.0.7 Adobe InDesign 17.4 (Windows)