Mercusys AC12 Router Setup Guide
Initial Setup
Connect the internet cable to the WAN port (orange). Then, connect one end of the patch cord (included in the kit) to any LAN port on the router, and the other end to your computer or laptop.
To access the router settings, open any browser and go to the address http://mwlogin.net.
The router will immediately prompt you to create and set a password, which will be required for future access to the settings.
Image Description: A screenshot of a web browser displaying the Mercusys AC12 router login page, prompting the user to create a password. The page shows fields for 'New password' and 'Confirm password', with a note about using 6-15 characters including numbers, letters, and symbols.
Internet Connection Setup
Select the internet connection type as "Dynamic IP". Click "Next".
Image Description: A screenshot of the Mercusys AC12 router settings interface, showing the 'Network' section. The user is prompted to select an internet connection type, with options like PPPoE, Static IP address, Dynamic IP address, L2TP, and PPTP. 'Dynamic IP address' is highlighted.
Wi-Fi Network Setup
Next is the Wi-Fi network setup. Here you can change the wireless network name (SSID) for both bands and set a Wi-Fi password.
To set a different password for the 5 GHz band, uncheck the box next to "Copy password for 2.4 GHz wireless network".
Image Description: A screenshot of the Mercusys AC12 router's wireless settings. It shows fields for the 2.4 GHz and 5 GHz wireless network names (SSID) and passwords. The option to copy the 2.4 GHz password to the 5 GHz network is visible.
Click the green checkmark. The router will save all settings and restart.
Image Description: A screenshot showing a confirmation message for completing the wireless settings, with a green checkmark indicating success.
That's it! If the Mercusys AC12 is distributing internet and everything is working, the setup is complete.
Accessing Internet and Advanced Settings
If the above steps were followed, open any browser and go to http://ab.sevencom.ru.
Enter the Login and Password specified in your contract and click the "Submit" button. If everything is done correctly, internet access will be enabled.
If you need to change any settings later, you can do so by opening any browser, going to http://mwlogin.net, and entering the password you set during the quick setup.
Image Description: A screenshot of the Mercusys AC12 router login page, showing a field for the password.
On the main page, there are three tabs:
- Device Management: Displays all connected devices. You can block them or limit their internet speed.
- Network: Internet connection settings.
- Wireless Settings: You can change the wireless network name, password, or disable the Wi-Fi network (e.g., for the 5 GHz band).
Image Description: A screenshot of the Mercusys AC12 router's basic settings interface. It shows the 'Connected Devices' section with a list of connected devices (DESKTOP-BVD..., iPhone) and their connection details (IP address, Wi-Fi, speed). It also shows the 'Network' and 'Wireless Settings' sections in the left-hand navigation pane.
Other parameters can be found in the "Advanced Settings" section.
In the "Network" section, "WAN" allows you to configure the internet connection if the quick setup did not work.
Image Description: A screenshot of the Mercusys AC12 router's advanced settings, specifically the 'Network WAN' configuration page. It displays fields for connection type, IP address, subnet mask, default gateway, and DNS server.
Wireless Network Customization
In the "Wireless Settings" section, you can change the wireless network settings. Modify the password, network name, and also disable or enable one of the operating modes (e.g., 2.4 GHz or 5 GHz).
