Verbatim 66972/67001 10000mAh PD 3.0 & QC 3.0 Power Pack User Manual
Model Numbers: 66972, 67001
Brand: Verbatim
Introduction
Thank you for purchasing the Verbatim 10000mAh PD 3.0 & QC 3.0 Power Pack. This portable charger is designed to provide reliable and fast charging for your mobile devices on the go. It features Power Delivery (PD) 3.0 and Quick Charge (QC) 3.0 technologies for efficient power transfer, along with integrated cables for convenience.
Safety Information
- Read all instructions before use.
- Do not expose the power pack to water or moisture.
- Avoid extreme temperatures (below 0°C or above 45°C).
- Do not disassemble or attempt to repair the unit.
- Keep out of reach of children.
- Do not short-circuit the terminals.
- Dispose of the product responsibly according to local regulations.
Package Contents
- 1 x Verbatim 10000mAh PD 3.0 & QC 3.0 Power Pack
- 1 x User Manual (this document)
Product Diagram Description
The power pack features a compact rectangular design. On the top surface, there is a power button and LED indicator lights. The sides house the ports and integrated cables.
- Top Surface:
- [Power Button]: Press to check battery level or start/stop charging.
- [LED Indicators]: Four small LED lights that indicate the remaining battery capacity. Each light represents approximately 25% of the charge. (e.g., 1 light = 25%, 4 lights = 100%). A blue light may also indicate fast charging status.
- Side 1:
- [Integrated USB-C Cable]: A short, flexible USB-C cable is permanently attached and can be stored neatly.
- Side 2:
- [Integrated Lightning Cable]: A short, flexible Lightning cable is permanently attached and can be stored neatly.
- Bottom/Rear Surface:
- [USB-A Port]: A standard USB-A output port for charging devices via a separate USB cable.
- [USB-C Input/Output Port]: A USB-C port that can be used to charge the power pack itself or to charge a device using a USB-C to USB-C cable.
Note: Specific port configurations may vary slightly. Please refer to the physical product for exact layout.
Getting Started
Charging the Power Pack
Before first use, fully charge the power pack.
- Connect a compatible USB-C cable (not included, unless using the integrated USB-C cable to charge from a USB-C power adapter) to the USB-C input port on the power pack.
- Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
- The LED indicators will illuminate and blink to show the charging status. All four LEDs will be solid when fully charged.
Tip: Using a high-wattage USB-C PD charger will charge the power pack faster.
Charging Your Devices
The power pack can charge multiple devices simultaneously.
Using Integrated Cables:
- Connect the integrated USB-C cable or Lightning cable directly to your compatible device's charging port.
- Press the [Power Button] on the power pack to begin charging. The LED indicators will show the remaining battery level.
Using USB Ports:
- Connect your device's charging cable to the appropriate USB port (USB-A or USB-C) on the power pack.
- Connect the other end of the cable to your device.
- Press the [Power Button] on the power pack to begin charging.
Note: The power pack may automatically start charging when a device is connected, or it may require pressing the power button.
Specifications
| Feature | Specification |
|---|---|
| Battery Capacity | 10000mAh / 37Wh |
| Input (USB-C) | 5V/2.4A, 9V/2A (PD 3.0) |
| Output (USB-C) | 5V/3A, 9V/2A, 12V/1.5A (PD 3.0) |
| Output (USB-A) | 5V/2.4A, 9V/2A, 12V/1.5A (QC 3.0) |
| Output (Integrated Cables) | Typically 5V/2.4A (check specific cable type) |
| Total Output | Max 18W |
| Dimensions | Approx. 140 x 70 x 15 mm (example dimensions) |
| Weight | Approx. 200g (example weight) |
| Operating Temperature | 0°C to 45°C |
Specifications are subject to change without notice.
Troubleshooting
Power pack not charging device:
- Ensure the power pack is charged. Check LED indicators.
- Make sure the charging cable is properly connected to both the power pack and the device.
- Try a different charging cable or port.
- Press the [Power Button] to initiate charging if it doesn't start automatically.
Power pack not charging itself:
- Ensure the USB power adapter and cable are working correctly.
- Try a different USB power adapter or cable.
- Ensure the power adapter provides sufficient power (e.g., 5V/2A or higher for faster charging).
Warranty & Support
This product is covered by a limited warranty. For detailed warranty information and customer support, please visit the official Verbatim website or contact your local Verbatim distributor.
Example: For Singapore, visit verbatim.com.sg. For Hong Kong, visit verbatim.com.hk. For China, visit verbatim.com.cn.
Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE Marking: Conforms to European safety, health, and environmental protection requirements.
RoHS Compliant: Restriction of Hazardous Substances.
