HP | Care Pack CentralPrintOS â Media Locator
HP DesignJet large-format printing - HP DesignJet printer ink, paper, film, vinyl and media | HP® Official Site
Instructions for hp models including: S1000, Stitch S1000 126-in Printer, Stitch S1000, 126-in Printer, Printer
1 giorno fa — Fast turnaround production with very short start- up times and speeds up to ... monitor, documentation software, user manual, media edge holders. (x4) ...
20 hours ago — Fast turnaround production with very short start- up times and speeds up to ... monitor, documentation software, user manual, media edge holders. (x4) ...
File Info : application/pdf, 2 Pages, 1.34MB
DocumentDocumentHP Stitch S1000 126-in Printer Take your application range to the next level with 126-inch (3.2-m) dye-sub production printing Produce high-quality jobs, gain high versatility With a single device, print on both transfer paper and direct-to-fabric with great results. Enhance your backlit saturation performance on direct-to-fabric thanks to the contact heater.1 Get deep blacks, vivid colors, and high-resolution with 1200 native dpi printheads and the Drop & Dry system. Reliable image quality at speed with a Smart Nozzle Compensation system and Optical Media Advance Sensor Plus. Meet your deadlines with high productivity Fast turnaround production with very short startup times2 and speeds up to 2370 ft²/hr (220 m²/hr).3 Help increase your uptime with user-replaceable printheads and HP preventive maintenance support.4 Confidently print unattended with spreader rollers, 10-liter ink supplies, and rolls up to 600 lb (300 kg). Double throughput on substrates up to 63 in (1.6 m) with the dual roll option. Save time with easy operation In 40% less time, a single operator can easily load both transfer and textile rolls.2 Distribute jobs over the fleet, get color consistency with built-in spectrophotometer/HP Configuration Center. Control your print operations virtually anytime, anywhere and make data-driven decisions with HP PrintOS.5 Sustainability in action This printer is intended to work only with cartridges that have a new or reused HP chip, and it uses dynamic security measures to block cartridges using a non-HP chip. Periodic firmware updates will maintain the effectiveness of these measures and block cartridges that previously worked. A reused HP chip enables the use of reused, remanufactured, and refilled cartridges. More at: http://www.hp.com/learn/ds Messaging Footnotes 1 Applicable to the backlit media included in the HP Media Solutions Locator, see http://www.hp.com/go/mediasolutionslocator. 2 Very short start up times compared to alternative 126-inch dye-sublimation based textile printers under $250,000 USD available as of July, 2020. Preparation time including 40% less loading time, printhead cleaning, and warm up time. This is based on internal HP testing in July, 2020 and features including automatic media tension adjustment and easy, simple media path, automatic and optimized printhead cleaning, and warm up in parallel with loading. Testing was performed measuring the time from starting the printer loading process until the printer starts printing, and measuring time with a chronometer. 3 Production-Economy print mode, 2-pass, 50%, for certain patterns of curtains and upholstery for interior décor applications. Based on internal HP testing in February, 2019 on transfer paper (Coldenhove Jet-X 57 grams, 126-in/3.2-m width). 4 Individual services may be provided by HP or an HP-authorized partner. Some services depend on printer, service contract, and region availability. 5 HP PrintOS is available in both web and mobile app view and needs the printer to be connected to the Internet. The HP PrintOS Mobile Application is compatible with AndroidTM 4.0 or later and iPhone mobile devices running iOS 8 or later. For more information, please visit http://www.hp.com/go/stitchs1000 Datasheet Technical specifications Print Print speed Print resolution Technology Ink types Print Cartridges/Bottle, Number Ink drop Print cartridge/bottle volume delivered Printheads Long-term print-to-print repeatability Media Applications Handling Maximum media width Media rolls Roll size Maximum roll weight Maximum roll diameter Thickness Stretchability Media types Connectivity Interfaces 3770 ft²/hr - Maximum Speed (1-pass); 2370 ft²/hr - Production Economy (2-pass); 1720 ft²/hr - Production Fast (3-pass); 1400 ft²/hr - Production Quality (4-pass); 1080 ft²/hr - High Quality (6-pass) 1 and 2 pass are available for transfer printing only Up to 1200 x 600 dpi HP Dye Sub Printing Technologies HP Dye Sub Inks 4 (cyan, magenta, yellow, black) 12 pl 10 L 4 HP Thermal Inkjet (2 cyan/black, 2 magenta/yellow) Average 1 dE2000, 95% of colors 1.5 dE20001 Banners; Billboards; Displays; Exhibition and event graphics; Exterior signage; Interior decoration; POP/POS; Textile Roll-to-roll, ink collector 126 in 1 25 to 126 in Up to 660 lb (126-in roll); Up to 220 lb (63-in roll) 13.8 in Up to 19.7 mil Winding direction up to 5%; Cross winding direction up to 10%; Diagonal up to 10% Sublimation transfer papers, sublimation polyester fabrics Gigabit Ethernet (1000Base-T) Dimensions (W x D x H) Printer Shipping Operating area Weight Printer Shipping Included What's in the box Environmental ranges Operating temperature Operating humidity Acoustics Sound pressure Power Consumption Certification Safety Electromagnetic Environmental Warranty 228 x 54 x 66 in 231 x 71 x 75 in 344 x 172 in 3020 lb 4442 lb HP Stitch S1000 126-in Printer, printheads, printhead cleaning kit, 126-in spindles (x2), spreader rollers, ink collector, set of ink collector foams and filters, aerosol extractor channel, HP Internal Print Server and monitor, documentation software, user manual, media edge holders (x4), cleaning supplies, pneumatic gun, beacon 59 to 86ºF 20 to 70% RH (non-condensing) Printing: <68 dB(A) (operating), <58 dB(A) (idle) 5.5 kW (typical) transfer paper; 6.5 kW (typical) direct-to-fabric IEC 60950-1+A1+A2 and IEC 62368-1, 2nd Ed. compliant; United States and Canada (CSA listed); EU (LVD and MD compliant, EN60950-1, EN 62368-1, EN12100-1, EN60204-1, and EN1010); Russia, Belarus and Kazakhstan (EAC) Compliant with Class A requirements, including: USA (FCC rules), Canada (ICES), EU (EMC Directive), Australia (ACMA), New Zealand (RSM) WEEE; China RoHS; EAEU RoHS; EU RoHS; REACH; CE marking compliant One-year limited hardware warranty Ordering information Product 1D3A8A Accessories HP Stitch S1000 126-in Printer 4J0X0A 4R4W4A 4R4W7A 4TA09A 7JC63A D9Z41B G1K80B L5E74C HP 126-in Dual Roll Kit HP 126-in Spindle HP 126-in Diverter Roller HP Stitch S1000 Ink Collector Foam Kit HP Ergosoft Pro RIP S1000 Color Edition HP Large Format Onyx Thrive RIP Software HP 126-in Dual Roll Spindle HP Large Format Caldera Grand RIP Software Original HP printing supplies 4UV63A 4UV64A 4UV65A HP 638 10-liter Black Stitch Dye Sublimation Ink Cartridge HP 638 10-liter Cyan Stitch Dye Sublimation Ink Cartridge HP 638 10-liter Magenta Stitch Dye Sublimation Ink Cartridge 4UV66A 4UV67A 4UV68A 4UV69A HP 638 10-liter Yellow Stitch Dye Sublimation Ink Cartridge HP 618 Magenta and Yellow Stitch Dye Sublimation Printhead HP 618 Black and Cyan Stitch Stitch Dye Sublimation Printhead HP 618 Stitch Dye Sublimation Printhead Cleaning Kit Use Original HP inks and printheads, and HP large format printing materials, to experience consistent high quality and reliable performance that enable less downtime. These critical components are designed and engineered together as an optimized printing system, and Original HP inks are designed to maximize the life of HP printheads. Protect your HP printer investment by using Original HP inks for full HP warranty protection. For more information, visit https://hp.com/go/OriginalHPinks HP Support Services offer installation and extended support services (e.g. 2, 3, 4, and 5 years). For more information, please visit http://www.hp.com/go/cpc Specification Footnotes 1 The color variation inside a printed job has been measured at 4-pass mode on transfer media and also in direct-to-fabric situations within this limit: maximum color difference (95% of colors) 1.5 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 1.5 dE2000. Backlit substrates measured in transmission mode may yield different results. Results are dependent on sublimation process variability. © Copyright 2024 HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. December 2024 DOC-M