Roku Video Doorbell & Chime SE
Quick Start Guide
What's included
- A: Roku Video Doorbell SE
- B: Roku Chime SE
- C: Wall plate
- D: Wedge kit
- E: Extension wires (x2)
- F: Fuse
- G: Wire caps (x4)
- H: Bracket screws (x2)
- I: Screws (x2)
- J: Plastic anchors (x2)
What you'll need
- [Phillips screwdriver] Phillips screwdriver
- ? Your smartphone
Components
A: Front view of the Roku Video Doorbell SE unit.
B: The Roku Chime SE unit.
C: Back view of the Roku Video Doorbell SE unit.
D: Wedge kit for adjusting doorbell angle.
E: Extension wires.
F: Fuse.
G: Wire cap.
H: Bracket screw.
I: Screw.
J: Plastic anchor.
Doorbell - FRONT
- 1: Microphone
- 2: Lens
- 3: Fill light
- 4: Doorbell button [bell icon]
Doorbell - BACK & Chime
Doorbell - BACK
- 5: Reset button [reset icon]
- 6: Screw terminals
Chime
- 7: Setup button [setup icon]
- 8: Status light [status light icon]
- 9: Speaker [speaker icon]
Let's get started
STEP 1: Download the Roku Smart Home app
Scan the QR code below to download the Roku Smart Home app on your smartphone. Sign in with your Roku account or create one.
Smartphone & app
Message & data rates may apply.
STEP 2: Install your doorbell & chime
In the Roku Smart Home app, tap the "+" button, then "Add Device" to find "Video Doorbell." Follow the instructions to finish setup.
Recommended location
Install your doorbell less than 6.5 feet above ground level.
What's that light mean?
Doorbell Status Lights
Doorbell | State |
---|---|
YELLOW - Solid | Powered |
YELLOW - Flashing | Waiting for connections |
YELLOW and BLUE - Flashing | Connecting to router |
BLUE - Flashing | Connected to external network |
BLUE - Solid | Connected and working |
Chime Status Lights
Chime | State |
---|---|
YELLOW - Solid | Powered |
BLUE - Flashing | Connected to network |
BLUE - Solid | Connected and working |
More features are waiting
Unlock the full potential of your doorbell with a Roku Smart Home Subscription.
Learn more at go.roku.com/rokusmarthome
Safety Information
FCC WARNING
Any change or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING
Do not use the battery near a heat source. Do not use the battery near fire or an oven, or in an ambient temperature exceeding 80°C. Over-heating may cause an internal short-circuit, heat generation, smoking, deformation or burning. Wall mount (mounting height < 2m), tma is 50°C.
Need help?
[setup videos icon] Setup videos
[common questions icon] Common questions
[tips and tricks icon] Tips and tricks
Visit go.roku.com/doorbells