Component Name

The tower fan consists of the following components:

• Control Panel
• Fan body
• Base
• Fragrant Box

Parts List:

• Remote control x1
• Manual x1

NOTE: All pictures in this manual are for explanation purposes only.

PRODUCT INSTALLATION

Assembly Instructions

NOTE: Please place the machine on the package foam or other soft surfaces and invert it to avoid scratch marks when installing the base.

1. Take out the fan body and the spare parts from the box. Put the front base onto the rear base and join them together. (See Fig. 1)
2. Unlock the plastic nut from the fan body.
3. Then insert the fan body into the base. (See Fig. 2)
4. Fix the fan body on the base with the plastic nut. (See Fig. 3)

OPERATION INSTRUCTIONS

Control Panel Operations

The control panel features various functions:

• Power: Press the power button [power-symbol] to turn the fan on and off. When pressing the start button [start-symbol], the function will also be activated. When pressing the power button [power-symbol] to turn off the fan, the function will close at the same time.
• Fan Speed: Press the fan speed button [fan-speed-symbol] repeatedly to adjust the fan speed.
• Mode Settings: Press the mode button [mode-symbol] to alternate between the mode settings.
• APP Control: Long press the mode button [mode-symbol] for 3 seconds to start matching or disconnect APP CONTROL.
• Negative Ion: Control Panel: press the oscillation button [oscillation-symbol] for three seconds to turn on or off.

Function descriptions:

• Timer: Press the timer button [timer-symbol] repeatedly to adjust the timer. Set timed power off between 1 hour and 7 hours in starting up status; Set appointed starting up between 1 hour and 7 hours in standby status (power on but without starting up).
• Oscillation: Press the oscillation button [oscillation-symbol] to turn oscillation feature on or off.

Remote Control

The remote control should be normally used within 16ft of the front of the product and 30 degrees of the deviation angle.

Battery Information: The battery contains many heavy metals, acids and bases, etc., which may threaten human's health. Waste batteries should be recycled separately. The product does not contain batteries.

Remote Control Functions:

• Turn oscillation on/off [oscillation-symbol]
• Startup/Standby [startup-standby-symbol]
• Alternate between modes [mode-symbol]
• Program the timer [timer-symbol]
• Press "+" or "-" to increase or decrease wind speed or timer.

Battery Type: AAA Battery, 1.5V

NOTE: Use manganese or alkaline batteries of type "AAA". DO NOT use rechargeable batteries. Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.

APP SETUP AND OPERATION

Download the SmartHome app

On an app market (Google Play Store, Apple App Store), search for "SmartHome" and find the SmartHome app. Download and install it on your phone. You can also download the app by scanning the QR code below.

[QR code for app download]

Register and log in

Open the SmartHome app, and create a new account to start (you can also register through a third-party account). If you already have an existing account, use the account to log in.

Connect your devices to SmartHome

1. Please make sure your mobile phone is connected to a wireless network. If it is not, go to Settings and enable wireless networks and Bluetooth.
2. Please power on your devices.
3. Open SmartHome app on your phone.
4. If a message of "Smart devices discovered nearby" appears, click to add.
5. If no message appears, select "+" on the page and select your device in the list of nearby devices available. If your device is not listed, please add your device manually by the device category and device model.
6. Connect your device to the wireless network according to instructions on app. If the connection fails, please follow the instructions provided by the app to continue with the operation.