Instruction Manual for LOCK ER DOWN models including: LD2011E, LD2011EEX, LD2011EEX Console Safe, LD2011EEX, Console Safe, Safe, Console

DL 1c9520873aca7f29e5e5ed75599d

Rohweder, Blake C.

Locker Down LD2011EEXELOCK | Appliances Connection

Locker Down LD2011EEXAB3 | Appliances Connection

Locker Down LD2011EAB3 | Appliances Connection

PDF preview unavailable. Download the PDF instead.

D62b1cb20ba6c8
Security Products
INSTALLATION INSTRUCTIONS
LD2011E/LD2011EEX
[2007-2014 Chevrolet Silverado, Suburban, and Tahoe/ GMC Sierra, Yukon, and Yukon XL with Less Brackets]
1. For any combination style lock, it is a good idea to set the combination before installing the safe. We recommend that the combination be set with the DOOR OPEN in order to test the lock combination effectively without locking yourself out.
2. Clear out the contents of the center console for now, including the factory mat at the bottom of the console.
3. Remove the 4 screws that are holding down the center console. 4. Insert the lid assembly diagonally with the lock facing forward towards the dash, then turn the
lid assembly inside the console so that the outline matches with the console compartment outline (see images on back for exact orientation). 5. With the lid OPEN, insert the right-side bracket first (this is the side with the USB cable), then the left side bracket (see images on back for side descriptions)
a. Once the sides are inserted over the bolts on each side of the lid assembly, apply the LOCK'ER DOWN provided nuts to each of the four bolts.
6. Using an IMPACT DRILL or SCREWDRIVER, apply the 4 self-tapping screws into each of the four slots (2 on the bottom section of each bracket) and through the floor of the console.
7. Remove the padding from the bottom of the inside of the safe. 8. Tighten the screws and nuts, DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE
CONSOLE OR SAFE! 9. Enjoy your purchase!
Tools Needed:
· IMPACT DRILL or SOCKET WRENCH, SCREWDRIVER · 13mm Socket bit
Contents Included: 4 11mm Nuts.
4 Black Self Tapping Screws.

Image 1: Diagonal Orientation for installment

Image 2: Assembly orientation after turning the to fit.

Image 3: Left Side Bracket

Image 4: Right Side Bracket


Microsoft Word for Microsoft 365