Tilta Nucleus-Nano Wireless Lens Control WLC-T04

User Guide

Packing List:

Nucleus-Nano Motor x1
Nucleus-Nano Handwheel Controller x1
15mm Single Rod Mounting Baseplate x1
15mm x 100mm Aluminum Black Rod x1
Photo Lens Follow Focus Gear Ring x 2
Handwheel Attachment Plate for G2X and Ronin-S x1
Handwheel Attachment Adapter for Zhiyun Crane x1
Micro USB to Micro USB Nano Motor Power Cable x1
14500 Dual Battery Charger x1
14500 Batteries x2
M4 Allen Key x1
M6 Allen Key x1
User Guide x1
Cardboard Box x1

1. Attaching the Motor

1. Use a 1/4"-20 screw to mount the baseplate to the camera body.

2. Insert the rod into the 15mm Single Rod Mounting Baseplate.

3. Loosen the motor's hand-tightened screw and attach the motor to the rod. Rotate the motor so that it rests against the lens' focus gear, then tighten the screw.

4. Use a 1/4"-20 screw to attach the gimbal's baseplate to the 15mm Single Rod Mounting Baseplate.

2. Attaching the Nucleus-Nano Handwheel Attachment Plate

For Tilta Gravity G2X and DJI Ronin-S: Use the included M6 screw to attach the plate to the handle of the Gravity G2X and the Ronin-S's M4 screw to attach it to the handle of the Ronin-S.

For Zhiyun Crane: Loosen the hand-tightened screw of the Handwheel Attachment Plate Adapter for Zhiyun Crane, then clamp it around the handle of the gimbal. Tighten the hand-tightened screw to secure the adapter. Then use the included M6 screw to attach the Handwheel Attachment Plate.

Example shown with Tilta Gravity G2X.

3. Attaching the Handwheel

Make sure the red toggle is flipped to the upmost position. Next, slide the handwheel into the plate and lower the red toggle to lock it into place.

4. Auto-calibrate the motor to the range of the lens

For lenses with hard stops at close focus and infinity: Hold the [Cal] button for 3 seconds to engage the motor's auto-calibration.

For lenses with no hard stops at close focus and infinity: Turn the handwheel to where your lens reads close focus and double press [Cal] to set the close focus end of the handwheel. Turn the handwheel to where your lens reads infinity and double press [Cal] to set the infinity end of the handwheel. The manual calibration is now complete.

5. Setting an A-B range to the handwheel

Rotate the handwheel to the desired position of the A mark and press [SET] to create an A mark. Then rotate the handwheel to the desired position of the B mark and press [SET] to create a B mark. The LCD display will show the marks that you have set. Simply press [SET] again to delete your A-B range.

6. How to use the R/S function

Link your camera's compatible R/S cable (optional) from your camera's R/S port into the Nucleus-Nano Motor's LANC port. Then click [REC] to start/stop the record function on your camera.

FUNCTION: Nucleus-Nano Handwheel

1. Menu Display Screen

2. Power and R/S control

3. UP button

4. DOWN button

5. SET button

6. Battery Compartment

7. Calibration button

8. Micro-USB port

POWER ON/OFF: Press [REC] to power unit on. Hold [REC] to power off.

5. Calibrate Handwheel

5.1 When do you need to calibrate the handwheel?

When turning the handwheel to the close focus or infinity end of its range, the motor quickly spins back to the other side of its calibrated range.

5.2 How to calibrate the handwheel?

Hold the button to enter the handwheel's menu then cycle through the menu to find (Cal Knob). Press the button to find (Cal Knob) then double click the ▲ button to confirm and follow the on-screen instructions.

Menu Options: Knob Dir, Vibration, Cal Knob, Restore Information.

6. Assigning the Wireless Control

Double click [SET] to switch back and forth from MASTER and SLAVE modes.

MASTER: The Nucleus-Nano Handwheel Controller is in control of the Nano Motor.

SLAVE: Releases the control from the Nucleus-Nano Handwheel controller to either the Nucleus-M's FIZ hand unit or Nucleus-M hand grips.

FUNCTION: Nucleus-Nano Motor

MicroUSB port
R/S port
15mm Rod Attachment
UP button
Menu Display Screen
DOWN button

USER GUIDE

1. Set the Channel

Use the buttons to adjust the channel numbers of both the handwheel and motor to the same channel so that they can communicate with each other.

Connect with Tilta

WeChat APP

Official Tilta Website

	Tilta Nucleus-NII Wireless Lens Control System: User Manual Detailed user manual for the Tilta Nucleus-NII Wireless Lens Control System, covering hand unit and motor setup, operation, calibration, and advanced settings for professional filmmakers.
	Tilta Nucleus-N II Wireless Lens Control System User Manual User guide for the Tilta Nucleus-N II Wireless Lens Control System (WLC-T05), detailing hand unit and motor setup, operation, pairing, firmware updates, and safety precautions.
	Tilta Nucleus Nano II Control Handle WLC-T05-CH User Manual Comprehensive guide to the Tilta Nucleus Nano II Control Handle (WLC-T05-CH), detailing its features, specifications, and operation for professional camera control.
	Tilta Nucleus-M WLC-03 Wireless Follow Focus System User Guide Comprehensive user manual for the Tilta Nucleus-M WLC-03 Wireless Follow Focus System, covering product overview, technical specifications, component functions, calibration procedures, and syncing instructions for motors, handles, and the FIZ unit.
	Tilta Nucleus-M WLC-T03 Wireless Follow Focus System User Manual Comprehensive user guide for the Tilta Nucleus-M WLC-T03 wireless follow focus system, covering setup, operation, calibration, and technical specifications for professional cinematography.
	Tilta Nucleus-N II Wireless Lens Control System User Manual Comprehensive user manual for the Tilta Nucleus-N II Wireless Lens Control System, covering hand unit and motor features, setup, operation, pairing, and firmware updates.
	Tilta Nucleus-M II Wireless Lens Control System Quick Start Guide This guide provides essential information for setting up and using the Tilta Nucleus-M II Wireless Lens Control System. It covers installation, connection, maintenance, safety precautions, troubleshooting, and a detailed overview of the system's components and functions, including the FIZ Hand Unit, Motor, and Hand Grips. The document also lists the packing contents for various kits.
	TILTA Nucleus Nano II Power Handle User Manual and Specifications Comprehensive guide to the TILTA Nucleus Nano II Power Handle, covering its features, packing list, detailed specifications, and versatile power supply capabilities. Learn how to connect accessories, power your camera rig, and build monitoring systems.