EMEET OfficeCore M1A User Manual
Product Functions
The EMEET OfficeCore M1A is a compact, circular speakerphone designed for clear audio communication.
Top View Description: The top surface features a speaker grille and control buttons.
- Answer/End Call Button ?: Located centrally, this button is used to answer incoming calls and end active calls.
- Volume Up Button ➕: Press to increase the speaker volume.
- Volume Down Button ➖: Press to decrease the speaker volume.
- Mic Mute Button ?: Press to mute or unmute the microphone.
- LED Indicator ?: Provides visual feedback on the device's status.
- USB Type C Power Supply Port: Located on the side of the device, this port is used for power and data connection to a computer.
Instructions for Use
Connecting to a Computer
To connect the EMEET OfficeCore M1A to your computer:
- Use the provided USB cable to connect the speakerphone to a USB port on your computer.
- The EMEET OfficeCore M1A will automatically start up when connected via USB.
- The device will automatically turn off when the USB cable is disconnected from the computer.
- Upon startup, the intelligent noise cancellation function is automatically activated to enhance audio clarity.
Visual aids in the manual depict a laptop, a USB cable, and a USB-to-USB-C adapter, illustrating the connection process.
LED Indicators
Status LED
| Status | Indication | LED Color |
|---|---|---|
| Power on | Three indicators light up successively. | Blue |
| Working | Three indicators remain lit. | Blue |
| Microphone mute | Three indicators remain lit. | Red |
Volume LED Indications
The volume is indicated by a series of LEDs, showing the current volume level:
| Volume Level | LED Pattern |
|---|---|
| 0% | ⚪⚪⚪ |
| 10% | ⚫⚪⚪ |
| 20%~30% | ⚫⚫⚪ |
| 40%~50% | ⚫⚫⚪ |
| 60%~70% | ⚫⚫⚫ |
| 80%~90% | ⚫⚫⚫ |
| 100% | ⚫⚫⚫ |
Product Parameters
| Output rating of the speaker | 3W | Signal-to-noise ratio | 75dB |
| Number of microphones | 2 | Microphone directivity | 360° |
| Product dimensions | 112*35.8mm |
Simple Fault Statement (Troubleshooting)
| Problem or Symptom | Possible Causes | Troubleshooting |
|---|---|---|
| The product does not work after connecting via USB cable. | ① USB cable not inserted properly. ② USB cable is damaged. | ① Reinsert the USB cable. ② Replace the USB cable. |
| The speaker does not work after connection. | ① Speaker not used correctly. ② M1A speaker is muted. | ① Set this device as the default speaker. ② Use the "volume up" button to increase device volume. |
| The microphone does not work after connection. | ① Microphone not used correctly. ② M1A microphone is muted. | ① Set this device as the default microphone. ② Disable the microphone mute function. |
| If issues persist after troubleshooting. | Device driver identification fails. | Navigate to Device Manager, select "Sound, video and game controllers", uninstall the current M1A device driver, then reconnect the device to the computer. |
Certifications
The product is compliant with various standards, indicated by certification marks such as FC, CE, CCC, and WEEE (Waste Electrical and Electronic Equipment).
