Scorpius-N4BTG Wireless Numerical Keypad Mouse

Model: N4BTG

Product Overview

Thank you for purchasing the Scorpius-N4BTG Keypad Mouse. This device offers on-the-fly switchable 2.4GHz and Bluetooth wireless connectivity, combining a numerical keypad with mouse functionality. It features a 1000 DPI optical sensor and can operate for up to 100 hours on 2 AAA batteries.

For any questions, please visit www.ione.com.tw, www.ione-usa.com, or www.ione-europe.com.

Specifications

Dimensions: W121mm x H224mm (folded)

Tolerance: +1 / - 2mm

Material: Gray-bronze 250g

Part Number: [Not specified in detail]

Package Contents

System Requirements

Keypad Mouse and Accessories

The keypad mouse features the following components:

Connectivity Modes

2.4 GHz Wireless Mode (Red Indicator)

  1. Insert the 2.4GHz dongle into a USB port.
  2. Insert 2 AAA batteries into the compartment.
  3. Slide the power switch to the "ON" position on the underside of the device. The indicator light will turn red.

Bluetooth Wireless Mode (Blue Indicator)

  1. Insert 2 AAA batteries into the compartment.
  2. Press and hold the "Mode Switch" for 3 seconds. The indicator light will change to blue.
  3. Press the "CONNECT" button located under the keypad. The blue LED indicator will flash, indicating the device is in discoverable mode.
  4. On your device, open Bluetooth settings or the Bluetooth device manager and pair with "KEYPAD MS".

Indicator Status Table

The device features indicator lights for different modes:

ModeNum Lock IndicatorKeypad IndicatorMouse Indicator
Numerical Keypad with MouseONONON
Numerical Keypad onlyONONOFF
Mouse only ModeOFFONOFF

Important Statements

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

RADIATION EXPOSURE STATEMENT

The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user's body or if the device is set to a lower output power, if such a function is available.

FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Manufacturer Information

IONE ELECTRONIC TECHNOLOGY CO., LTD. TAIWAN BRANCH

Manufactured in China.

Website: www.ione.com.tw / Email: ione@ione.com.tw

Europe Website: www.ione-europe.com / Email: info@ione-europe.com

USA Website: www.ione-usa.com / Email: support@ione-usa.com

China Website: www.ione-cn.com / Email: ione@ione-cn.com

Thailand Website: www.ione-th.com / Email: ione@ione-th.com

Product Model: N4BTG

FCC ID: 2APDTN4BTGTX (Keypad Mouse)

FCC ID: 2APDTRX (Keypad Receiver)

Logos:

Models: N4BTGTX, 2APDTN4BTGTX, N4BTG, Wireless Numerical Keypad Mouse

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=5350204 Adobe PDF library 15.00 Adobe Illustrator(R) 24.0