ResMed Mirage Swift™ II NASAL PILLOWS SYSTEM
Quick Fitting Guide
This guide provides instructions for fitting the ResMed Mirage Swift II Nasal Pillows System.
Available in: English, Deutsch, Français, Italiano, Español, Português, Svenska
Important: Ensure the ResMed logo faces outward.
Fitting Steps:
-
Step 1: Positioning the Mask
Place the nasal pillows mask onto your face, aligning the pillows with your nostrils.
-
Step 2: Adjusting the Rear Headgear
Adjust the headgear straps at the back of your head for a snug but comfortable fit.
-
Step 3: Adjusting the Top Headgear
Pull the top headgear strap over your head and adjust for a secure fit.
-
Step 4: Securing the Pillows
Gently press the nasal pillows into place to ensure a seal around your nostrils.
-
Step 5: Connecting the Air Tubing
Connect the CPAP machine's air tubing to the mask's swivel connector.
-
Step 6: Final Fit Check
Ensure the mask is comfortable, sealed, and the headgear is properly adjusted.
The ResMed logo is visible on the headgear.
Components Card
Mirage Swift II Nasal Pillows System
Frame System (no headgear) Part Numbers by Region:
| Region | Part Number | Component Description |
|---|---|---|
| Europe | 60513 | Frame System (no headgear) |
| ANZ | 60514 | Frame System (no headgear) |
| France | 60518 | Frame System (no headgear) |
| UK | 60516 | Frame System (no headgear) |
| Asia-Pacific | 60515 | Frame System (no headgear) |
Other Components:
- Frame Component (S*): 60537
- Frame Component (M*): 60538
- Frame Component (L*): 60539
- Pillow Component (Qty 1): 60528
- Pillow Component (Qty 10): 60529
- Hose Clip (Qty 3): 60530
- Cushion/Seal Component (Qty 1): 61121
- Cushion/Seal Component (Qty 10): 61124
- Headgear Component (Qty 4): 60523
- Headgear Component: 60526
- Headgear Component (Qty 10): 60524
- Pillow Size (S*): 60541
- Pillow Size (M*): 60542
- Pillow Size (L*): 60543
- Mask Component: 60525
- Mask Component: 60540
- Mask Component: 60545
Size Guide:
- S*: Small
- M*: Medium
- L*: Large
