User Guide for STOLTZEN models including: SHE401K, SHE401K 4K HDMI 70M HDBaseT Extender with IR RS232, SHE401K HDBaseT Extender, 4K HDMI 70M HDBaseT Extender with IR RS232, 4K HDMI 70M HDBaseT Extender, HDBaseT Extender with IR RS232, HDBaseT Extender, HDBaseT, Extender
Stoltzen SHE401 HDBaseT Kit med RS232 | Stoltzen | Ditt trygge AV-valg
Stoltzen SHE401K 4K HDMI 70M HDBaseT Extender w/IR RS232 VER 1.0 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended. This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Table of Contents 1. Introduction..........................................................................................1 2. Features. ...............................................................................................1 3. Package Contents...............................................................................1 4. Specifications.......................................................................................2 5. Operation Controls and Functions......................................................3 5.1. Transmitter Panel..........................................................................3 5.2. Receiver Panel. ............................................................................4 6. Application Example...........................................................................6 1. Introduction The Stoltzen SHE401K 4K HDMI 70M HDBaseT Extender uses HDBaseT technology to extend the HDMI signal and bi-directional IR control signal up to 70 meters via a single Cat 5e/6 cable. This product converts the HDMI signal into a standard HDBaseT signal and then transmits it through the LAN cable. It can easily control the signal source device or display device from the remote end via bi-directional IR signal pass-through. It supports RS-232 signal pass-through, and the resolution is up to 4K@30Hz. This product can be widely used in video conference systems, multimedia broadcasting, HDMI signal extension and other fields. 2. Features HDMI 1.4 and HDCP 2.2 compliant Supports video resolution up to 4k@30Hz Supports 10.2Gbps video bandwidth The maximum transmission distance via a single CAT5e/6 cable is: 70 meters: 1080P@60Hz/36bit; 3D 1080P@30Hz/36bit; 40 meters: 1080P@60Hz/48bit; 1080P@120Hz/24bit; 3D 1080P@60Hz/36bit; 4K@30Hz/24bit. Supports POC (Power Over Cable) function, meaning as long as either the transmitter or receiver is connected to 12V/1A power supply, the other doesn't need it's own power supply. With bi-directional IR and RS-232 control signal pass-through Compact design for easy and flexible installation 3. Package Contents 1 × SHE401T 4K HDMI 70M HDBaseT Extender (Transmitter) 1 × SHE401R 4K HDMI 70M HDBaseT Extender (Receiver) 1 × Power adaptor (12V DC,1A) 1 × IR Receiver cable (1.5 meters) 1 × IR Blaster cable (1.5 meters) 4 × Mounting ears 2 × 3-pin Phoenix connectors 1× User Manual 1/6 4. Specifications Technical HDMI Compliance HDMI 1.4 HDCP Compliance HDCP 2.2 Bandwidth 10.2Gbps Video Resolutions Up to 4K@30Hz 4:4:4 Transmission Mode HDBaseT Transmission Distance 1080P70m; 4K40m ESD Protection Human-body Model: ±8kV (Air-gap discharge), ±4kV (Contact discharge) Connection Transmitter ports Input: 1×HDMI Type A [19-pin female] Output: 1×HDBT Out [RJ45] Control: 1×IR In [3.5mm Stereo Mini-jack] 1×IR Out [3.5mm Stereo Mini-jack] 1×RS-232 [Phoenix connector] Receiver ports Input: 1×HDBT Out [RJ45] Output: 1×HDMI Type A [19-pin female] Control: 1×IR In [3.5mm Stereo Mini-jack] 1×IR Out [3.5mm Stereo Mini-jack] 1×RS-232 [Phoenix connector] Mechanical Housing Metal Enclosure Color Black Dimensions Transmitter/Receiver: 120mm (W)×74mm (D)×16mm (H) Weight Power Supply Transmitter/Receiver: 240g Input: AC100~240V 50/60Hz Output: DC12V/1A (US/EU standards, CE/FCC/UL certified) Power Consumption 10W (Max) Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20~90% RH (non-condensing) 2/6 5. Operation Controls and Functions 5.1 Transmitter Panel No. Name Function Description 1 HDMI In HDMI signal input port. Connect HDMI source device. 2 IR In Works with far-end IR Out port, connect with 12V IR Receiver to collect IR signal to control far-end display device from local. 3 IR Out RS-232 4 connector 5 DC 12V 6 Power LED 7 HDBaseT Out 8 RS-232 Mode switch Works with far-end IR In port, connect with 12V IR Blaster to send IR signal to control input source device from remote. Connect to control system or PC with 3-pin phoenix connector for RS-232 command transmission. DC 12V power supply port. Supports bi-directional POC function. Red LED will be on when the Transmitter is powered on. Connect to the HDBaseT In port of the Receiver via a CAT5e/6 cable. Ctrl -- RS-232 pass-through control mode. Update -- Update mode (connect the RS-232 port to a PC to update the Valens IC program.) 9 Data Signal Indicator lamp On: HDMI signal with HDCP. Flash: HDMI signal without HDCP. (Green) Off: No HDMI signal. On: Transmitter and Receiver are in good Connection connection status. 10 Signal Indicator Flash: Transmitter and Receiver are in poor lamp (Yellow) connection status. Off: Transmitter and Receiver are not connected. 3/6 5.2 Receiver Panel No. Name Function Description 1 HDMI Out HDMI signal output port. Connect HDMI display device. 2 IR In Works with far-end IR Out port, connect with 12V IR Receiver to collect IR signal to control far-end display device from local. 3 IR Out 4 RS-232 connector 5 DC 12V Works with far-end IR In port, connect with 12V IR Blaster to send IR signal to control input source device from remote. Connect to control system or PC with 3-pin phoenix connector for RS-232 command transmission. DC 12V power supply port. Supports bi-directional POC function. 6 Power LED Red LED will be on when the Receiver is powered on. Connect to the HDBaseT Out port of the Transmitter 7 HDBaseT In via a CAT5e/6 cable. 8 RS-232 Mode switch Ctrl -- RS-232 pass-through control mode. Update -- Update mode (connect the RS-232 port to a PC to update the Valens IC program.) 9 Data Signal Indicator lamp On: HDMI signal with HDCP. Flash: HDMI signal without HDCP. (Green) Off: No HDMI signal. On: Transmitter and Receiver are in good Connection connection status. 10 Signal Indicator Flash: Transmitter and Receiver are in poor lamp (Yellow) connection status. Off: Transmitter and Receiver are not connected. 4/6 Description 1 POC(Power Over Cable) Application Example DC 12V 1A DC 12V 1A Description 2 Bidirectional Infrared control Application Example Description 3 Bidirectional RS-232 control Application Example HDMI Cable CAT5e/6 HDMI Cable HDMI Cable CAT5e/6 HDMI Cable PC 5/6 6. Application Example The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 6/6Microsoft Word for Microsoft 365