mailto:30fps@1080p
netdvr.netnetdvr.net/
User Manual for LS VISION models including: LS-BC4G, LSBC4G, 2AW7H-LS-BC4G, 2AW7HLSBC4G, LS-BC4G 4G Body Camera, 4G Body Camera, Body Camera, Camera
SHENZHEN LS VISION TECHNOLOGY LTD LS-BC4G 4G body Camera 2AW7H-LS-BC4G 2AW7HLSBC4G ls bc4g
File Info : application/pdf, 22 Pages, 1.89MB
DocumentDocumentBody Camera User's Manual Table of Content Preface..................................................................................................................................3 Brief introduction and main features ...................................................................................4 Buttons Description ..............................................................................................................5 Interface introduction...........................................................................................................7 Operations ............................................................................................................................8 Operation for BodycamTool ...............................................................................................13 Operations for 4G BodyCamera connection.......................................................................16 Specification .......................................................................................................................21 Packing List.........................................................................................................................22 Preface Thank you for using our Body Cameras. This manual is applicable for BC00 7 series Body Cameras. Please read the manual carefully before using the devic es. Please keep this manual for reference in the future. The content of this manual is subject to be changed without notice. Important notice Please keep the device from high temperature. When smoke, smell or noise comes out from the device, shut down the power immediately, and contact your supplier in time. Please contact your supplier if the device is not working properly. No warranty will be covered if the damage caused by unauthorized disassembly or repair. Please do NOT charge the device at high temperature over 45 degrees Celsius, it could possibly cause the explosion of the battery. Please use the certificated battery from the original factory ONLY. Please read this manual carefully before using the device, and follow the instructions when using the device. Please do NOT kick or hit the product to avoid device damage and data missing. Keep the device away from high temperature and high humidity environment. Keep the device away strong interference source. Please backup the data recorded by the device in time. Please keep the lens clean for good image quality. Please keep your user name and password safe. Brief introduction and main features Brief introduction The body cameras are the portable devices that can record video and audio. The devices can also transmit live video and audio through 3G or 4G, do live tracking with GPS. The devices have a TFT monitor and buttons on it and user can operate the device easily. The body cameras are usually used by police man, security guard, and other law enforcement officers. Main features The device is in compact size and suitable for portable use of recording. User can get live video and audio through 3G, 4G or WiFi. User can get live tracking of the device through built-in GPS in the device. The GPS data will also be recorded into the record file with audio and v ideo, so user can get the location information in the record file. Use lithium battery for power supply. Device can be recording continuously for 10 hours. Built-in 32G storage space. (32G~128G optional storage space Built-in 4 million pixel cameras, support recording at 1080P, 720P or D1 resolution, support taking picture with 40 million pixels, 32 million pixels and 2 million pixels. Support IR. Support recording at night. Record file name have information on date, time, r ecord type, which make it easier for searching and document. User can explore, search and playback the files on the device. Support panic button. The panic button alarm can be sent to control center through 3G/4G. Record encryption makes the evidence more safe. Device can display device ID, user ID, date and time. Device can display information about battery usage, charging status, system time and memory space. Dev ice has light indication for power on, recording v ideo or audio. Green light indicates power on, red light indicates video recording, yellow light indicates audio recording. Device can report event alarm, including alarm for battery running low, insufficient memory space alarm etc. Device has log files. Device with log events that include power on/off, recording video, recording audio, taking pictures, GPS status fixed, 3G/4G connection, and WiFi connection. Buttons Description Buttons Description Buttom Power Talk back Record Snap A udio Record Laser SOS SIM USB Menu/ OK Up Icon Action Function Short Press When device is ON, short press to turn on/off the screen. Long press 1. When device is OFF, power on device when holding for over 3 seconds. 2. When device is ON, power off device when holding for over 3 seconds. Start talking back. PTT Short Press (Need to connect to interphone or server through internet) Short Press Start recording when device is ON, Stop recording after pressing it again. Long press Power ON and start recording when device is OFF. Short Press 1. Start to snap. 2. Snap when device is recording and store the picture. Long press Holding for 3 seconds will turn on the flash light when device is ON. Short Press 1. Start recording audio when device is ON. 2. Switch to record audio when device is recording video. Short Press Turn on the laser when device is ON (only when laser is enabled in menu) Long press Long press Holding for 3 seconds will turn on the IR (when IR is in manual mode) Holding for 3 seconds to starts an alarm and recording, send the alarm to server at the same time SIM Insert / Eject Insert a SIM card into the slot and use 4G service to connect internet USB Connect For charging, data transmission, external camera, headset and interphone ect. Short Press 1. Display the main menu on the screen when device is in preview mode. 2. Confirm the setting changed. Long press Switch 1080P, 720P or other REC resolution in preview mode. Short Press Scroll up the menu or zoom out the view in preview mode. Down Short Press Scroll down the menu or zoom in the view in preview mode. Return / Play 1. When menu is displayed, press to return to the upper level menu; Short Press 2. When device is idle, press to play back recorded video, audio and pictures. 3. When recording, press the button will mark the recording video as IMP file. Long press Disable/Enable menu operaton when recording. Indicator LED Indicator Window 1 Window 2 Colour Blue Green Red Yellow Description ONCharging complete Twinkling: Charging OFFNot charging Twinkling slowlyIdle Twinkling faster: Face recognition is working ON: Live streaming or menu operating Video recording in progress Audio recording in progress Interface introduction Operations 1. Power On/Off When the device is OFF, holding the "Power" button for 3 seconds will turned on the device. When the device is ON, short press the "Power" button will turn On/Off the monitor, press and hold the "Power" button for 3 seconds will turn off the device. 2. Record Video When device is ON, short press the "Record" button to start recording, the device will vibrate once and indicator will turn red. W hen the device is recording, press the "Record" button again will stop recording with vibration and beep. When device is ON, holding the "SOS" button to active the alarm system and start recording. When the device is OFF, holding the "record" button for 3 seconds will power on the device and start recording video. 3. Record Audio When the device is ON, press "Audio Record" button to start recording, the device will vibrate once and the indicator will turn yellow. Press the "Audio Record" button again, the device will stop recording. 4. Take Picture When the device is ON, press "Snap" button to take pictures. 5. IR When the IR setting is Manual, holding the "IR" button for 3 seconds can turn On/Off the IR light; When the IR setting is Auto, the IR switchs according to the ambient light illumination. W hen the IR is ON, the Bodycam's view will be black and white. 6. Play Back Short Press the "Return" button, the "Playback" menu will be displayed. Use "UP" and "DOW N" button to choose the directory and file to play. See the picture below, the directory of "20190101_20" means those videos in the folder is recorded between 20:00 and 21:00 in the day of 2019/01/01, "203315" means the video is generated at 20:33:15, "1030h" means that is a general video with 30fps@1080P. 6.1 Play back video files In "Video" directory, there are directories named with date and hour, press "OK" button to access the directories and press "OK" button to play back. The video format is AVI. 6.2 View the pictures In the "Photo" directory, there are directories named with time. Choose the picture file and press "OK" button to view the pictures. The picture format is JPG. 6.3 Play Audio In the "Audio" directory, there are directories named with t ime. Choose the audio file and press "OK" to play the audio. The audio format is WAV. 7. Settings When the device is in preview mode, press "menu" button to show the "Setting" menu. Press "UP" or "Down" to scroll up or down in the menu. Press "OK" to set the configuration. Press "Return" to return to the upper level menu. The Rec resolution is for recording. The default setting is 1080P(1920*1080). The default record FPS is 30 FPS. The higher of the FPS, the smoother of the video footage. Recording quality refers to the bit rate of recording, the higher of the bit rate v alue, theoretically, the better image we can get from the video footage. H.264 Super High Medium Low 1080P 10M 8M 6M 4M 720P 8M 6M 4M 2M 360P 4M 2M 1M 0.5M The Live resolution is for video streaming through 4G/3G or WIFI. The default resolution is (1280*720), the higher value we set, the better image we can get from the live straming. The Live v iew FPS for v ideo streaming through 4G/3G or WIFI. The higher of the FPS, the smoother of the live video. The default value for live quality is "medium". We can get a better live streaming base on the higher live quality value. H.264 Super High Medium Low 1080P 4M 3M 2 M 1 M 720P 3M 2 M 1.5M 0.8M 360P 1.5M 1M 0.7M 0.35M The Live mode includes fluency first and quality first, fluency means more fluent streaming we can get, and quality first means better quality of live streaming we can get. Picture size means the picture's resolution when you snap; the picture's resolution you took when device record, which is base on the record resolution. Burst shot means device can take several pictures at a time. When the Dewarp is ON, it means that the camera has distortion correction to make the picture more realist ic and accurate; when the Dewarp is OFF, the lens angle is bigger and zoom in/zoom out is available under the setting. The default USB mode is "Auto". User can choose from "Auto", "Host" or "Device" mode. "Host" means that device is working on 4G/3G or WIFI mode; "Device" means camera is communicating with PC; "Auto" means that camera can detect the USB connected, if the USB cable connects with PC, camera will work on "device" mode, if the USB cable connects with charger, camera will work on "Host" mode. The 3G/4G setting is used to turn On/Off 3G/4G module. The WiFi setting is to turn On/Off the WiFi and AP. The default AP password is 12345678. WIFI list can show the list of WiFi searched by device, which makes camera connect a WIFI more easier. Device support an external camera connection with USB cable, when the setting change to "ON", device will restart and then detect the external camera connection, if an external camera connected, device's screen will switch to the external camera view. Camera support face recognition that is to detect human's face, if a man's face were similar to a picture store in the database, device would trigger an alarm and start recording. We can create an "images" folder as the database, copy the pictures to the folder, those pictures format should be "jpg" or "bmp", the picture's size should smaller than 320x240 (24bit). The GPS module is to turn on/off the GPS, when the GPS connected, the GPS icon will turn green. LCD brightness is Used for controlling the monitor's brightness. Given "High", "Medium", "Low" 3 options. The setting of autoscreen Off is for turning off screen automatically, when the setting is OFF, you have to press power button to turn screen off. Quick charge means that device will turn off when device is charging by charger. The record mode can be "Auto" and "Manual". When it is "Auto", device will record video automatically after device power on, and when it is "Manual", video record needs to press record button. The oldest files (except the IMP files) can be overwritten when the memory card is going to ov erflow. The IR switch mode can be "Auto" and "Manual". "Auto" means IR will automatically switch depends on ambient light illumination, "Manual" means that holding the "IR" button for 3 seconds to switch IR. The microphone volume can be choose from 0 to 10. The higher of the setting value, the more sounds information device can get from the surrounding. The speaker volume can be from 0 to 10. The default volume is 9. Voice reminder is to turn On/Off the "beep" when pressing buttons. Is NOT inc luding record and snap reminder. External audio inc ludes "Headphone", "Interphone", "None" 3 options. The setting should refers to the external device connected with camera. File length means the length of the saved video for recording. You can select from 5 mins to 30 mins. "Record Encrypt" means that the video is encrypted when you record, the encrypted video can be played with special player, the default password is 888888. Pre-Recording means that device records 10 seconds video and store in RAM cyclically in advance when you press the "record" button. Post-Recording means that dev ice will remain recording within the setting time after you press the "record" button to end the record. The options include 5s, 10s, 20s, off. Time Sync means that device can sync it's time with internet. The default laser setting is "disable", which means that you can NOT turn on laser light by pressing "IR/Laser" button, to turn on the laser you must change the setting to "enable" to. When the password protect is ON, it needs you toenter the password to get into the setting and playback interface. Set the language for the device. According to the bodycamera's registration, the default is English. Talk group means that several people can talk in a group, it needs an internet platform to support the function. Talk P2P means that 2 people can talk to each other in a "talk group", it needs an internet platform to support the function. The device information includes hardware version, firmware version, MCU version, Device SN, vendor ID, product ID, Lan IP, 3G/LTE IPwifi IP, Gate way, DNS0, DNS1, Server IP, Server Port, 4G/3G Module, IMEI, Operator Name, Signal Level, W ifi Module, W ifi MAC, AP Name. Operation for BodycamTool Install the BodycamTool Support Windows2000/WindowsXP/Vista/Windows7/Windows8 and Windows10, if it's your device first time to connect your PC, you need to install the BodycamTool software to make your PC communicate with our device. 1.1 Hold the "PTT" button to connect device to your PC's USB port with USB cable, then your PC will generate a "CD driver", see the picture: software "BodycamTool.exe" in the "CD driver". , and then find the 1.2 Double c lick the BodycamTool.exe to set up the software, and click the "finish" button to finish the installation. And then it will continue to install the USB driver, see the picture as below: Click "next" button to go on the driver's installation, then the driver install successfully, c lick "Finish" to end the installation, see the picture as below. Login BodycamTool 1. Double c lick the icon to run the sofeware after your device connect to your PC, click "Detect" button to read the product IDwhen the "Status" box shows "InitDev Device Success!", which means that BodycamTool connects device successfully, input the password 888888click "Login" button, the "Status" box shows Login Device Success! See the picture as below 2. In the first part we can see the "Enable USB D isk" button that means device's memory can be read by PC, "Time Sync" means that device's time can synchronize to your PC. Note those three setting "Reset to Default"/"Format Disk"/"Newpassword", Once the factory settings are restored, the current settings saved will be restored to the factory default settings. Format SD indicates that the data inside the dev ice will be erased completely. Device default password is 888888, if you want to modify the password, Please make it more easy to remember. 3. In the second part user can set "Area"/ "Country"/ "City" according to your current location, after that the time zone will change automatically. "APN" means that device support dedicated card provided by telecommunication operators, the "APN User" and "APN" is also provided by operators. 4. The third part inc lude dev ice information and wifi, c lick "Get" button to read the default information, you can click "Set" to modify these information after you input a new one(the "Device NO." can NOT be changed)Input "WifiSSID" and "Wifi password", then click "Add" button to add the wifi to device and then c lick "Get" to check if the wifi was adding successfully. 5. The forth part is server config, Select the "ServerName" to "CMSV6" and c lick "Get" button to get the defalut server setting, modify the server IP in "IP" box and then click "Set" to save the IP setting. (6608 port is the default one, generally the default port doesn't need to change) 6. The fifth part is about "PTT" and "Log". For "Enable"/ "Disable"/ "Auto" respectively means full duplex/ half duplex/ auto mode. Click "Export log" to export log to the device storage. 7. The sixth part for device upgradation. Note: To avoid detecting device failed due to inadequate power, try to connect it in rear USB slot in your PC. Operations for 4G BodyCamera connection This part is only for built-in 4G or WIFI module device. 1. Connect to the internet with 4G SIM card.(make sure "USB Mode" setting is Auto) a. Insert a available 4G SIM card into the BodyCamera's card slot. b. After you insert the 4G SIM card, device will do a self-detection to check if a SIM is there , once the device has connected to the internet, you can see a 4G signal icon on the screen, and the other "M" icon beside 4G signal icon will turn green, which means the dev ice has connected to the server. 2. Connect to the internet with wifi. (If the device has NOT built in wifi model, you can skip this part ) a. Remove the USB cable from device after you have set wifi to your device.(follow the BodyCamTool wifi setting) b. Then go back to the dev ice and find the wifi setting, change the setting to be "ON"(default setting is "OFF")And then you can find the WIFI signal icon and "W" icon on the screen, when the "W" icon turns green, which means the device has connected to the server. 3. Connect the website: http://netdvr.net with your PC's browser, and download the CMSV6 platform to install it in your PC(according to your PC's OS to select a proper one). You also can find the platform software in the CD ROM.(Find ios version from apple store ) 4. Double c lick the C MSV6 icon , and then you can see the login interface, enter the given user name, password and server IP before click "Login" button. 5. The operation of CMSV6 platform 5.1 The Map a. The status of the device can be observed in the dev ice list. Where the icon turns green that indicating the device is online and connected to the GPS to get the location information; the pink icon indicates that the device is online but device fails to get the GPS signal; the gray icon indicates that the device is offline. b. Status in PTZ control shows the current basic information of the device; PTZ: PTZ operation such as rotation angle, focus, aperture, light, wipers, etc; Color: Remote control camera mode (from top to bottom: brightness, contrast, color, saturation, exposure); VOIP: Including intercom, listening and broadcasting. For intercom that allow you to communicate between the platform and equipmen, for monitor means the background sound of the device can be individually monitored, and the broadcast is a function that allow you to send voice messages to devices. (Due to the device has not built in relevant module, PTZ and color functions are not available) c. The map: Show the location information of device. d. The event box: Show the action information of the device, such as devices get online/offline etc. e. Live video: To preview the video. f. Menu bar & Toolbar: menu bar inc ludes System, View, S etting; Toolbar includes Map/ Video/ Track/ Record/ Manage/ Other. 5.2 Video a. Start to preview the video: double click the device icon in the list to preview the video. b. The amount of screen for one page to preview, you can choose a proper one to prev iew video, see the icons: c. Zoom in and zoom out two buttons. : You can zoom in or zoom out the video though clicking the d. Group switching button next group. : You can switch the current group to preview previous or e. Aspect ratio button : To set the three different video preview resolutions: full window, 4: 3, 16: 9. f. Display mode button : Including Real Good and Fluent Good two options, Real Good means that the live video's real-time is the first priority; Fluent Good means that the live video's fluency is the first priority. g. Capture image button : With Capture Image and Front-end capture. Capture Image: Capture the image basing on the video screen Front-end capture: Capture the image basing on the device's camera h. Sound button : To turn on or turn off the sound. i. Start video button : Including Start video, Open all video and Display polling window. Start video: Start the current default video Open all video: Start all windows' video Display polling window: To set the corresponding time to play the video in turn. j. Stop video button : Including Stop video, Close all video, Clear data, Clear all data. Stop video: To stop current default video Close all video: To stop whole windows' video Clear data: To clear the memory channel information for the current focus window Clear all data: To clear the memory channel information for the whole current window k. Full-screen button : To show the video with full-screen. 5.3 Track User can perform track search according to the spec ified conditions and export the relevant data. First, select the device, then select the start and end time, click Search. See the picture below: Button's icon and function icon function Start or pause playing the track Stop playing the track Delete the current GPS data Export the current GPS data to Excel Add the current track to the line List of searching history 5.4 Record The user can download and play the video file in the device storage, see steps below: a. Select the device and pick the search time, then select the vehic le device (video ), c lick Search. (If you want to download photo in the device storage, you can choose "vehicle device (picture)") b. After that, c lick the file options to see the files that the device recorded during that time period. c. Right c lick the mouse to select the file to download (press Ctrl to select multiple files), c lick on the "download", when the files were downloaded, you can see the directory of the downloaded files in the download options, see the picture below. Note: packing video is not available for downloading. d. Open the downloaded folder, play the downloaded videos with spec ial player (such as hplayer) offered by supplier. (The platform's player does not support to play the recorded video in device's memory online or offline). e. If the download is stopped or the download fails due to network reasons, the video file also can be played (just for finished part). In the case that the user does not exit the software, you can continue to download the video by clicking "Continue downloading" in the right-click menu of the download list. Specification OS Video Audio OS Booting time Language Video input Video output Recording resolution Frame rate Record mode Compression Audio input Compression Audio record Linux 3.10.73 < 10 s English 1x digital Camera for 1080p/720p/360p recordingavailable for external camera 2 inch LCD screen 1920x1080/1280x720/640x360 30 fps@1080p Record audio and video at the same time H.264 (High profile up to level 4.1) 1x MIC input, support intercom connection w ith USB PCM Support audio recording Live video resolution 1920x1080/1280x720/640x360 Video process Light source Two way radio Lens Alarm Int e rface Ne t w ork GPS Firmw are Phot ograph Snap St orage Flash light Laser IR Talk back Talk back in platform Lens's angle Alarm input USB Prot ocol 3G/4G w ifi GPS OSD Ove rw rit e Play bakc Play speed Pre-recording/postrecording De w arp Safe mode 1920x1080 8640x4752 Support snapping during recordingthe photo resolution base in recording Builtl in 32GB TF card(available for 32128GB) To increase brightness when you are recording or taking a photo Fix the view when you record Up to 10 Meters with Visible shape image at night Support two way radio between different devices(only for 4G/3G device) Support two way radio between device and platform(only for 4G/3G device) >120° Support alarm input and the alarm can be show in platform 1x USBfor charging, communication with PC, upgrade OS, connect external camera etc T CP/IP Optionalbuilt in 3G/4G module (HSUPA /HSDPA/WCDMA /EVDO/TD-SCDMA /FDD-LT E/TDD-LT E) Optionalsupport WIFI connection and AP Optional module for BDS/GPS/GLONASSto record location and speed Display and record time, license ID, officer ID, location, speed Support Support play back, file listed by time and alarm Support from 1/128 to 128 Maximum 10s pre-recording and 20s post-recording Support dewarp to make the picture more accurate and realistic Need password to enter Setting or Playback in safe mode Soft w are Upgrade W orking Record encryption Log hplayer CMSV6 Firmware maintain T e mpe rat ure Support Record encryption, encrypted video can be played in special player Record power on/off, setting change, start record, alarm etc Player software, play multiple cameras together, can also play the e ncrypted file Used for 4G/3G model only, support live view/live tracking/historical track Firmware can be upgrade though USB -40--60 condit ion Other Humidit y T ime Dual bit stream Default Indicat or Battery capacity Size W ight 40%80% synchronize with GPS, internet, PC Two different bit stream for recording and live streaming via 4G/3G Can set to default setting PowerRecordSnapAudio record 3600mAh non-replaceable battery, keep NON-4G device recording for about 10h keep 4G device recording for about 8hCharging time is about 4h 83.2*54.8*29.8mm About 145g Warning: Changes or modifications to this unit not expresslyapproved by the party responsible for compliance could void the user's authorityto operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, purs uant to part 15 of the FCC Rules . Thes e lim its are des igned to provide reas ona ble protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The device complies with RF specifications when the device used at 00 mm from your body-worn. Thirdparty belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. The maximum of body-worn results of SAR found during testing is 0.965W/kg(separation distance -0mm) Packing List No. Item 1 Body Camera & Clamp 2 Battery 3 Charging stand 4 USB cable 5 Adapter 7 Manual Number 1 unit 1 units 1 unit 1 set 1 set 1 set