Aqara Curtain Driver E1

The Aqara Curtain Driver E1 is a motorized device designed to automatically control existing curtains. It utilizes the Zigbee 3.0 wireless protocol, enabling scheduled curtain control and integration with other smart devices via the Aqara Home app. An Aqara Zigbee 3.0 hub is required for operation, and specific functions may depend on the hub model. For more details, please visit www.aqara.com/support.

Warnings

1. This appliance is suitable for children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they receive supervision or instruction on safe usage and understand the associated hazards.
2. Children should not play with the appliance.
3. Cleaning and user maintenance should only be performed by children under supervision.
4. WARNING: Disconnect the drive from its power source during cleaning, maintenance, or when replacing parts.
5. The device must be supplied only at safety extra-low voltage as marked on the appliance.
6. WARNING: Important safety instructions. Adhere to these instructions for safety.
7. Save these instructions.
8. Do not allow children to play with fixed controls.
9. Frequently examine the installation for imbalance and signs of wear or damage to cables, springs, and fixings. Do not use if repair or adjustment is necessary.
10. Do not operate during maintenance activities in the vicinity, such as window cleaning.
11. WARNING: Important safety instructions. Follow all instructions, as incorrect installation can lead to severe injury.
12. Before installation, remove any unnecessary cords or components and disable any equipment not needed for powered operation.
13. Ensure the characteristics of the driven part are compatible with the rated load and operating time.
14. This appliance contains non-replaceable batteries.
15. Fixed controls must be clearly visible after installation.
16. The mass and dimensions of the curtain to be driven must be compatible with the rated torque and operating time.

What's in the Box

• USB-A to USB-C Cable
• Track Glider × 2

Tutorial Video

Scan the QR code to view the installation and operation guide video. Alternatively, follow the manual's instructions for installation if the video is inaccessible.

Installation Requirements

Rail Types

The Smart Curtain Driver E1 (Track Version) is compatible with U-rails and I-rails. For rod installations, the Curtain Driver E1 Rod Version is required.

Installation Requirements of U-Rail

The bottom surface of the U-rail must be flat and smooth. Both sides of the rail should be sealed tightly with closure heads.

Installation Requirements of I-Rail

The bottom surface of the I-rail must be flat and smooth, with a width greater than 10mm.

Installation Requirements of Curtain Track Glider

The distance from the upper surface of the glider hanging ring to the bottom of the rail should be between 16 mm and 25 mm for both U-Rail Gliders and I-Rail Gliders.

Straight and Special-Shaped Rails

The Curtain Driver E1 supports straight and curved rails. For curved rails, the bend should have a radius of at least 25cm.

Quick Start Guide

Preparation before use

1. Connect the product to the Aqara Home app before installing it on the curtains. Ensure the Aqara Home app and Aqara Zigbee 3.0 hub are installed.
2. Open the app, navigate to the "Home" page, tap "+" in the top right corner, select "Add Device (Accessory)", choose "Curtain Driver E1", and connect to the hub following the app's instructions. Press and hold the Setting button for 5 seconds until a voice prompt is heard from the Hub.
3. If you have multiple Curtain Drivers, connect them all to the Aqara Home app before installation.
4. For double-sided curtains, connect two Curtain Drivers and group them for simultaneous control. On the Curtain Driver's main page, tap the "..." icon in the upper right corner, select "Create a group for Curtains", and follow the instructions.
5. It is recommended to fully charge the product before installation.

Installation Methods

Installation Methods for U-Rail

Single-Sided Curtains (one Curtain Driver needed)

1. After startup, quickly click the setting button twice to release the hook to its maximum length.
2. Hang the Smart Curtain Driver on the first and second gliders on the movable side of the curtains. Extra gliders can be used to position the driver correctly.
3. Quickly click the setting button twice to secure the Curtain Driver to the rail. A blinking green indicator light and three short beeps confirm successful installation.

The product can be configured via the app to open/close curtains based on ambient light intensity. For outdoor light control, the light sensor should face the window. For indoor light control, it should face the interior. Ensure no opaque objects obstruct the light sensor.

Double-Sided Curtains (two Curtain Drivers required)

Hang the two Smart Curtain Drivers on the track gliders of the curtains on the left and right sides, following the single-sided installation method.

Installation Methods for I-Rail

Single-Sided Curtains (one Curtain Driver needed)

1. After startup, quickly click the setting button twice to release the hook to its maximum length.
2. Install two adjustable track gliders onto the rail, positioning them between the first and second existing track gliders on the movable side of the curtains.
3. Hang the Curtain Driver on the two newly installed adjustable track gliders.
4. Quickly click the setting button twice to secure the Curtain Driver to the rail. A blinking green indicator light and three short beeps confirm successful installation.

The product can be configured via the app to open/close curtains based on ambient light intensity. For outdoor light control, the light sensor should face the window. For indoor light control, it should face the interior. Ensure no opaque objects obstruct the light sensor.

Double-Sided Curtains (two Smart Curtain Drivers required)

Hang the two Smart Curtain Drivers on the track gliders of the curtains on the left and right sides, following the single-sided installation method.

Opening Distance Settings

To ensure proper product usage, set the opening range after installation.

Single-Sided Curtains

1. After connecting to the Aqara Home app, configure the opening distance via the app by clicking the device card on the Home page and setting the stroke as instructed.
2. Alternatively, set the opening distance by pressing the setting button when the device is not connected to the Aqara Home app.

Detailed operations:

A) Pull the curtain to the completely closed position and install the Curtain Driver on the rail as per the "single-sided curtains" installation method.

B) Quickly click the setting button three times to set the first limit point of the range. A long beep confirms successful setting.

C) The Curtain Driver will automatically move to the opening limited point and stop after approximately 10cm. A long beep indicates that the second limit point has been successfully set, completing the opening range setup.

Double-Sided Curtains

A) Pull both left and right curtains to the completely closed position and install the two Curtain Drivers on the rail accordingly, following the "single-sided curtains" installation method.

B) Set the opening distance for the left and right Curtain Drivers by following Steps B and C for single-sided curtains.

Button Operation

Indicator Light Description

Buzzer Description

Battery Charging

When the battery is low, charge the Curtain Driver. Charging steps:

1. Quickly click the setting button twice or use the app to release the Curtain Driver from the rail and remove it.
2. Use the USB charging cable, plug the Type-C end into the Curtain Driver's charging port and the other end into the adapter for charging.
3. Full charging takes approximately 5 hours.

Specifications

• Dimensions: 145.7 × 96 × 46 mm
• Rated Current: 1.5 A
• Rated Torque: 0.2 N·m
• Wireless Protocol: Zigbee 3.0 IEEE 802.15.4
• Model: CM-M01 (CM-Curtain Motor series products, M01-the first Motorized products)
• Battery Type: Lithium battery (not replaceable)
• Rated Input: 5 V
• Rated Power Input: 7.5 W
• Rated Rotor Speed: 100 r/min
• Moving Speed: 12 cm/s
• Operating Humidity: 0~95% RH, no condensation

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Declarations and Notices

EU Declaration of Conformity

Lumi United Technology Co., Ltd. declares that the radio equipment type Curtain Driver E1, CM-M01 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: http://www.aqara.com/DoC/

CE

RF Exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

UK Declaration of Conformity

Lumi United Technology Co., Ltd. declares that the radio equipment type Curtain Driver E1, CM-M01 complies with Directive 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696). The full text of the UK declaration of conformity is available at: http://www.aqara.com/DoC/

UK CA

WEEE Disposal and Recycling Information

Products with this symbol are waste electrical and electronic equipment (WEEE). Do not mix with unsorted household waste. Hand over waste equipment to a designated collection point for recycling. Correct disposal and recycling prevent negative consequences to the environment and human health. Contact local authorities for more information on collection points.

IC NOTICE TO CANADIAN USERS

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES 003. This device complies with RSS 247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

French Translation: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numérique de la Classe B conforme à la norme NMB 003 du Canada. Cet appareil est conforme à la norme RSS 247 d'Industrie Canada. Le fonctionnement est soumis à la condition que cet appareil ne provoque pas d'interférences nuisibles.

RF Exposure statement (IC): This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. French Translation: Cet équipement est conforme aux limites d'exposition aux rayonnements de la IC établies pour un environnement non contrôlé. Cet équipement doit être installé et fonctionner à au moins 20cm de distance d'un radiateur ou de votre corps. Cet émetteur ne doit pas être co-localisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur.

Federal Communications Commission (FCC) compliance statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Contact Information

• Online Customer Service: www.aqara.com/support
• Customer Support Email: support@aqara.com
• Website: www.aqara.com
• Manufacturer: Lumi United Technology Co., Ltd.
• Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan District, Shenzhen, China

Zigbee Warnings

• Zigbee Operation Frequency: 2405-2475 MHz
• Zigbee Maximum Output Power: 13 dBm
• Under normal use, keep a separation distance of at least 20cm between the antenna and the user's body.