User Manual

Compatibility Note

• Please ensure your car supports wired CarPlay.
• Supports iPhone 6 and later iPhone models.
• The iPhone system version needs to be iOS 10 or above.

How to Confirm if Your Car Has Apple CarPlay Function

Method 1:

Connect your iPhone to your car using a USB data cable and look for the CarPlay logo on your car display.

[CarPlay Logo Indicator]

Method 2:

Check the compatible list below or consult your car manufacturer to verify if your car has this capability.

Check the website for supported car models:

https://www.apple.com/ios/carplay/available-models/

How to Use

1. Start the car and wait for the car's head unit system to load.
2. Connect the Wireless CarPlay adapter to the USB-A or USB-C port in your car. Ensure you plug the adapter into the port designated for wired Apple CarPlay.
3. On your iPhone, open WiFi and Bluetooth. Find the Bluetooth device named "smartDongle-****". Click 'Pair', then 'Allow', and finally 'Use CarPlay'.

[Description of iPhone Bluetooth pairing process: The iPhone's Bluetooth settings display "smartDongle-1310" as discoverable. A "Bluetooth Pairing Request" dialog appears, showing a code "020828" and options to "Cancel" or "Pair". Following successful pairing, a prompt asks "Use CarPlay with "smartDongle-1310"?", with options "Not Now" or "Use CarPlay". Another prompt may appear asking "Allow Contacts and Favorites Sync?", with options "Don't Allow" or "Allow".]

4. You are now ready to enjoy wireless CarPlay.

Important Notes

1. The wireless CarPlay adapter operates by establishing a Bluetooth connection between the iPhone and the vehicle, then switching to WiFi for the main connection. Once Bluetooth pairing is successful, the iPhone's WiFi will automatically connect to the adapter's WiFi, and the Bluetooth connection will be disconnected by default.
2. Ensure the wireless CarPlay Adapter's power indicator light is blue [Blue Light Indicator].
3. Confirm that your car model supports wired CarPlay.

Package Contents

• 1x Wireless CarPlay Adapter
• 1x USB-A OR USB-C OTG Adapter
• 1x 3M Sticker
• 1x User Manual

FQA (Frequently Asked Questions)

1. What is the WiFi password for the Wireless CarPlay Adapter?

Connection is made via Bluetooth, not Wi-Fi. After successful Bluetooth matching, the Wi-Fi connection is established automatically. No Wi-Fi password is required. Ensure your Wi-Fi is turned on and not in use by other devices during pairing.

2. Audio Input/Output Issues (calls rejected, voicemail, no sound, microphone issues, interrupted playback, abnormal voice function)

1) Check your iPhone's Bluetooth settings. If it's connected to another Bluetooth device (e.g., Apple Watch, earphones), disconnect those devices or turn off Bluetooth.

2) During a call, verify that the Audio output option is set to CarPlay.

Note: Bluetooth is primarily for the initial pairing. Once paired, the adapter relies on WiFi for operation, so turning off Bluetooth after pairing is acceptable.

3. The adapter's blue indicator light remains on after the car is turned off?

This is normal. Cars often maintain a low power state after being turned off, preventing the adapter's light from extinguishing immediately. The power consumption is minimal and will not drain your car battery.

4. Can the iPhone use other internet WiFi while using the wireless CarPlay adapter?

No. When the wireless CarPlay adapter is active, your iPhone's WiFi is occupied by the adapter. You cannot use other internet sources simultaneously. You can use your iPhone's cellular data (SIM card) for internet access.

5. Unable to automatically reconnect

1) Ensure your iPhone's Bluetooth and WiFi functions are enabled and that Bluetooth is not occupied when you enter the car.

2) The wireless CarPlay Adapter should automatically reconnect to your iPhone upon subsequent use.

3) Try clearing the pairing record on your iPhone, restarting the iPhone, and then re-pairing the adapter.

6. Can the adapter be paired with multiple iPhones?

The adapter supports pairing with up to five iPhones, but only one can be actively connected at a time. To pair with a new iPhone, cancel the current connection first. By default, the adapter will automatically connect to the last used iPhone.

7. Cannot find the Bluetooth and Wi-Fi for the Wireless CarPlay Adapter?

Verify that the wireless CarPlay adapter's blue power indicator light is on and that it is plugged into the correct port for wired Apple CarPlay.

If possible, test with another iPhone. If only a specific iPhone fails to detect the adapter's Bluetooth or Wi-Fi, try resetting the network and Bluetooth settings on that iPhone and then restarting it. If the issue persists across multiple iPhones, the adapter may be defective; please contact support.

Online Update

• If the adapter is functioning correctly, the current firmware version is suitable for your car. Updating the firmware is generally not recommended unless necessary.

• Only attempt this procedure if you cannot resolve your issue using the "FQA" list.

Update Steps

1. Power up the adapter.
2. Connect to the adapter's WiFi network. The password is "88888888".
3. Open Safari on your iPhone and navigate to "192.168.1.101" to access the settings page. Click "Update".
4. On the same page, you may optionally provide your car's make, model, and year, along with a detailed description of any issues. Tap "Submit" to report the problem. This information helps engineers research and develop solutions.
5. If issues arise after the upgrade, restore the adapter to factory settings.

Detailed description of the problem:

[Text input field placeholder]

Online Update

New version is available: 23060310.1345.2