TESLA
SPLIT AIR CONDITIONER
Model: TA36FFLL-1232IAWPC
WI-FI FUNCTION USER MANUAL
Introduction
This manual provides instructions for using the Wi-Fi function of the Tesla Split Air Conditioner, model TA36FFLL-1232IAWPC. It covers Wi-Fi module features, app installation, account management, connection procedures, and air conditioner control. Please read this manual carefully and completely before operating the device. Keep this manual for future reference. Note: Images in this manual are schematic diagrams; the actual product should be used as a reference.
Wi-Fi Module Features and Usage
Minimum smartphone specifications: Android version 5.0 or higher, iOS version 9.0 or higher.
Basic Parameters for Wi-Fi Module
| Parameters | Details |
|---|---|
| Frequency | 2.400-2.4835 GHz |
| WLAN Standards | IEEE 802.11 b/g/n (Channel 1-14 for EU/AU, Channel 1-13 for general use, Channel 1-11 for USA/CA) |
| Protocol Stack Support | IPv4/TCP/UDP/HTTPS/TLS/DNS |
| Security Support | WEP/WPA/WPA2/AES128 |
| Network Type Support | STA/AP/STA+AP |
| Max. RF Power | 18.5 dbm |
| Bluetooth Frequency | 2.402-2.480 GHz |
| Bluetooth RF Power | 9 dbm |
Operation Guide
Please use the simple guide instructions below as a reference for operation.
| Steps | Items | New Account | Reinstall APP (previously saved) |
|---|---|---|---|
| Step 1 | Download and install the application | YES | YES |
| Step 2 | Activate the application | YES | YES |
| Step 3 | Account registration | YES | YES |
| Step 4 | Login | YES | YES |
| Step 5 | Add device to control | YES | Saved device will remain |
Note: If you have previously registered an account and added devices, the added devices will remain when you log in again after reinstalling the APP.
Download and Install the Application
For Android Smartphones:
- Method 1: Scan the QR code with a scanner, then download and install the application. Description of Android QR code image showing the Tesla Smart logo.
- Method 2: Open Google Play Store on your smartphone and search for "Tesla Smart", then download and install the application.
For iOS Smartphones:
- Method 1: Scan the QR code and follow the prompts to go to the App Store, then download and install the application. Description of iOS QR code image showing the Tesla Smart logo.
- Method 2: Open Apple App Store on your smartphone and search for "Tesla Smart Things", then download and install the application.
Note: Please enable Storage, Location, and Camera permissions for this APPLICATION during installation. Otherwise, some problems may occur during operation.
Account Registration and Login
Registration
- If you do not have an account, tap the "Register" button.
- Read the Privacy Policy and tap "Agree".
Note: The application does not provide Turkish language support.
Login
- Tap the "Log in with an existing account" option.
- Enter your registered username and password.
- Tap the "Log in" button.
Description of login screen visual: Shows fields for username and password, a 'Forgot password' link, and a 'Log in' button. Also shows 'Register' and 'Log in with Existing Account' buttons.
Forgot Password
If you have forgotten your password or wish to reset it, follow the steps below:
- Tap the "Forgot password" button.
- Enter your account username (email address) and tap the "Obtain verification code" button.
- Enter the verification code received via email.
- Set a new password (6-20 characters, including letters and numbers) and tap the "Done" button.
Description of verification code screen visual: Shows a field to enter the verification code sent to email, with a resend option.
Description of set password screen visual: Shows a field to enter a new password, with requirements mentioned.
AP Mode Connection
- Turn on the indoor unit.
- Click the "+" sign in the upper right corner of the main screen.
- Select "Large Home Appliances".
- Tap the "Air Conditioner (Wi-Fi)" logo.
- Connect to the Wi-Fi network.
- Follow the on-screen instructions to reset the Wi-Fi module:
- For F series: Press the "HEALTH" button on the remote control 8 times within 10 seconds.
- For Q & M series: Press the "[Cooling]" and "[+]" buttons simultaneously for 3 seconds. An audible signal will indicate successful reset.
- Check the "Confirm device reset" option and tap "Next".
- Change the connection method to "AP mode" in the upper right corner and tap "Next".
- Enter the password for your connected Wi-Fi, then tap "Next".
- Follow the instructions and connect your mobile phone to the device's hotspot, typically named "SmartLifeXXXX".
- You can track the connection progress percentage on the screen in real-time.
Description of app screens for AP Mode connection: Shows selecting device type (Air Conditioner), network selection, reset confirmation, AP mode selection, entering Wi-Fi password, connecting to device hotspot, and progress tracking.
Air Conditioner Control
After the device is added, the device control screen will open automatically. The device control screen can also be manually opened by tapping the device name on the main screen.
Description of AC control interface visual: Displays current room temperature and set temperature (e.g., 26°C). Icons for various modes are visible: Auto, Cool, Fan, Dry. Other controls include fan speed adjustment, swing direction, scheduling, sleep mode, and power (ON/OFF).
Contact and Support
Arzum Customer Services
For installation service, call: 0850 222 1800
Authorized Service / Technical Services
For the current list of authorized services and the Service Information System (SERBİS), visit:
For English: Scan QR code or check the above links.
General Distributor
ARZUM ELEKTRİKLİ EV ALETLERİ SAN. VE TİC. A.Ş.
Address: Defterdar Mah. Otakçılar Cad. Sinpaş Flatofis No: 78, İç Kapı No: 34 EYÜPSULTAN / İSTANBUL / TÜRKİYE
Tel: (0212) 467 80 80 | Fax: (0212) 467 80 00
International
Arzum Europe After Sales Service Center
Email: service@arzum.com
Phone: +49 89 370 40 444
Website: www.arzum.com
