User Guide for SKYDANCE models including: T20, T20-1, T20-2, T20-3, T20 Wall Mounted Touch Panel, Wall Mounted Touch Panel, Mounted Touch Panel, Touch Panel, Panel
T20-1 T20-2 T20-3 T20 Touch panel 1/2/3/4 zone dimming switch RF remote. Each zone can remote control multiple Skydance’s 2.4G LED controllers.
Wall Mounted Touch Panel Model No.: T20,T20-1,T20-2,T20-3. 1-4 Zone dimming switch/Glass touch panel/Wireless remote 30m distance/AAA x 2 battery. T20-1 1 Zone switch. T20-2 2 Zone switch.
Panel 4 strefowy do taśmy LED MONO - T20 biały zasilany na baterie BLACK series
Wall Mounted Touch Panel Model No.: T20,T20-1,T20-2,T20-3 1-4 Zone dimming switch/Glass touch panel/Wireless remote 30m distance/AAA x 2 battery T20-1 1 Zone switch T20-2 2 Zone switch T20-3 3 Zone switch T20 4 Zone switch Features Touch panel 1/2/3/4 zone dimming switch RF remote. Each zone can remote control multiple Skydance's 2.4G LED controllers. Ultra sensitive high strength glass touch panel. Touch keys with chord tones and LED indicator. Free installation, no wiring, removable. AAA x 2 battery powered. White & Black glass panel available. LVD RED Technical Parameters Input and Output Output signal Working voltage Working current Standby current Standby time Remote distance RF(2.4GHz) 3VDC(AAA x 2) 5mA(Without tune) 20mA(with tune) 20A 1 year 30m (Barrier-free space) Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +65OC IP20 User Manual Ver 1.0.7 Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED Warranty Warranty 5 years Weight Net weight Gross weight 160g 190g Mechanical Structures and Installations Installation rack Battery compartments T20,T20-1,T20-2,T20-3 Wall Mounted Touch Panel 86.00 mm 20.50 mm 61.00 mm 86.00 mm Installation diagram: 61.00 mm Typical base as below: Uninstall Touch panel Baseplate To fix the panel, two options are offered for selection: Option 1: fix it on the wall with two screws. Option 2: adhere it to the wall with paster. Key function Zone1 Zone1 Zone2 T20-1 T20-2 ON key Short press: Turn on the light of each zone. Long press(1-6s): Dimming up when light is on. OFF key Short press: Turn off the light of each zone. Long press(1-6s): Dimming down when light is on. Long press(5s) : Turn on or turn off tone when light is off. Base T20-3 European style 86 size Zone1 Zone2 Zone3 Zone1 Zone2 Zone3 Zone4 T20 Page 1 Touch Panel work as RF remote (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Match: Short press match key, immediately press ON key of the touch panel. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match. The LED indicator fast flash a few times means all matched remotes were deleted. Use Power Restart Match: Switch off the power of the receiver, then switch on power, repeat again. Immediately short press ON key 3 times on the touch panel. The light blinks 3 times means match is successful. .Delete: Switch off the power of the receiver, then switch on power, repeat again. Immediately short press ON key 5 times on the touch panel. The light blinks 5 times means all matched remotes were deleted. Safety information 1. Read all instructions carefully before you begin this installation. 2. When installing batter y, pay attention to the batter y positive and negative polarity. A long time without the remote control, remove the batter y. When remote distance becomes smaller and insensitive, replace the batter y. 3. If no response from the receiver, please re-match the remote. 4. Gently handle remote, beware of falling. 5. For indoor and dr y location use only. User Manual Ver 1.0.7 T20,T20-1,T20-2,T20-3 Wall Mounted Touch Panel Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6