Instruction Manual for WARP solution models including: WS-SPACEON, 2AUNAWS-SPACEON, 2AUNAWSSPACEON, WS-SPACEON Wireless Charging with Cutting Edge GaN, WS-SPACEON, Wireless Charging with Cutting Edge GaN, Charging with Cutting Edge GaN, Cutting Edge GaN
WARP Solution WS-SPACEON 2AUNAWS-SPACEON 2AUNAWSSPACEON ws spaceon
File Info : application/pdf, 4 Pages, 309.12KB
DocumentDocumentProduct Specification Product Name : SPACE:ON Model Number : WS-SPACEON File Number : Revision : A0 Date : 2024-01-09 SPACE:ON APPPROVED BY CHECKED BY DESIGNED BY Temporary Version. www.warpsolution.com 1. Intended Use SPACE:ON 1.1 SPACE:ON provides purpose-suited lighting to specific areas. 1.2 SPACE:ON is for charging a receiver equipped with an RF wireless receiving circuit. 1.3 SPACE:ON wireless charging can only be used compatible with devices that contain a receiving circuit for charging the receiver, regardless of whether there is a battery or not. 1.4 This device is for indoor use only. 2. User Operation 2.1 SPACE:ON can turn the lighting on/off with the power switch. 2.2 SPACE:ON can only turn on/off the RF wireless transmitter. 2.3 SPACE:ON can only turn the lighting on/off. The status LED indicates the following operating conditions : touch touch touch Lights and RF wireless transmitter ON/OFF RF wireless transmission power ON/OFF Light ON/OFF only www.warpsolution.com 2 3. SPECIFICATIONS SPACE:ON ITEM Frequency RF Power output Operating Temp. Environment Mounting Power Color Dimensions Description 920MHz Center Frequency 1 Watt -20°C to 50°C Indoor use only Install it in your desired location. ADAPTER DC 12V T.B.D 97.2mm x 114mm x 217.7mm www.warpsolution.com 3 SPACE:ON Federal Communication Commission Interference Statement This device complies with Part 18 of the FCC Rules. This equipment has been tested and found to comply with the limits for a Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates , uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications . However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FOR PORTABLE DEVICE USAGE Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. www.warpsolution.com 4