Kenuo AI Learning Machine Quick Start Guide

Getting Started

This guide assists in setting up and using your Kenuo AI Learning Machine.

Key Device Controls

• HOME button: Returns to the main interface.
• Virtual key bar: Provides navigation (back, background programs, menu, screenshot).
• Wi-Fi Toggle: Searches for wireless display devices.

Initial Setup Wizard

Follow the on-screen prompts to select language, time zone, set up Wi-Fi, and configure user/computer names.

Network Connections

Wi-Fi

1. Go to Settings > WLAN/WiFi.
2. Enable Wi-Fi. The system scans for hotspots.
3. Select a network, enter the password, and connect.

Mobile Network

1. Insert SIM card (device off), then power on.
2. Go to Settings > Data usage.
3. Enable "Mobile Data Network".

Device Settings

• Sound: Adjust volumes for media, alarms, and ringtones. Set notification and call ringtones. Control system sounds.
• Security: Set screen lock (slide, pattern, PIN, password). Allow installation from unknown sources.
• Language & Input: Change system language and input method.
• Display: Adjust brightness, set screen sleep timer, configure auto-rotation, and toggle battery percentage display.
• Battery: View battery usage status.
• Bluetooth: Enable to scan and pair with accessories.
• Apps: Manage applications (uninstall, clear cache/data, force stop).
• User: Supports multiple user profiles with separate data and apps.
• Location: Enable/disable positioning and select methods.
• Accounts: Add and manage application accounts and data synchronization.
• Reset: Restore factory settings (erases all user data; backup recommended).
• Date & Time: Auto-sync with network or set manually. Configure 24-hour format.

Troubleshooting

• Cannot Turn On/Charge: Ensure battery is charged. Use reset hole (poke with toothpick) and hold power button for 10s. Charge for 30+ mins.
• Touch Screen Issues: Disconnect charger in high-interference areas. Restart device.
• Abnormal Charging: Reset device (reset hole or power button) and charge for 4+ hours.
• Screen Flickering: Charge battery. Check Developer Options.
• No Sound: Check volume levels. Ensure headphones are connected properly.
• Crashes/Freezes: Use reset hole or hold power button for 10s to force shutdown/restart.
• Computer Connection: Verify USB cable connection. Enable "USB storage". Avoid front USB ports.
• Video Playback Issues: Convert videos to supported formats.
• Wi-Fi Connection Problems: Check password, router distance, and router settings.
• Learning System Access: Connect to Wi-Fi if system was reset.

Important Information

Charger Requirements

Use chargers meeting specified voltage/current and national standards. Charge device every three months if unused. For long-stored devices, charge for 30+ minutes before first use.

Precautions

• Handle with care; avoid collisions, disassembly, and screen scratches.
• Avoid extreme temperatures, humidity, static electricity, and magnetic fields.
• Clean with mild agents; avoid harsh solvents.
• Pull plugs, not cables, when disconnecting.
• Use appropriate volume levels.

USB OTG Function

Connects to external devices (USB drives, hard disks, mice, keyboards) via OTG cable for data exchange. Ensure device battery is above 50%; high-power devices may need external power.

Hazardous Substances

This product adheres to hazardous substance regulations (SJT 11364, GB/T 26572).

O: Below limit; !: Exceeds limit.

FCC Compliance & SAR

FCC Statement

Complies with FCC Part 15. Subject to conditions: no harmful interference, and acceptance of received interference. Unauthorized modifications void user authority.

Tested to comply with Class B digital device limits for reasonable protection against harmful interference in residential installations. May cause radio interference if not used as instructed.

To correct interference: reorient antenna, increase separation, use different circuit, or contact provider/technician.

SAR Information

Meets government radio wave exposure requirements. FCC SAR limit: 1.6 W/kg (1g tissue). Tested for body-worn use at 0mm from body.

For compliance: use accessories maintaining 0mm distance, no metallic components. Use only approved antennas.

Body Use: Maintain 0mm separation. Third-party accessories must meet RF exposure requirements and avoid metallic components.