Fire Alarm Resources | Download fire alarm documents
Instruction Manual for SIEMENS models including: MOM2-XMP MOM-2 Mounting Plate, MOM2-XMP, MOM-2 Mounting Plate, Mounting Plate, Plate
Siemens MOM2-XMP Mounting Plate, Installation Instructions - Fire Alarm Resources - Free fire alarm PDF manuals, documents, installation instructions, and technical specifications
File Info : application/pdf, 2 Pages, 618.29KB
DocumentDocumentInstallation Instructions Model MOM2-XMP MOM-2 Mounting Plate INTRODUCTION INSTALLATION COMPATIBILITY SPECIFICATIONS P/N 315-034822-3 The Model MOM2-XMP Mounting Plate from Siemens Industry, Inc., is used in CAB1, CAB2, CAB3 enclosures for mounting MOM-2 modules. A MOM2-XMP mounts in one position on a CAB-MP system mounting plate. CAB-1 Enclosure is for indoor use only in dry environments. Remove all system power before installation, first battery then AC. (To power up, connect the AC first, then the battery.) Refer to Figure 1. There is a top and bottom to the MOM2-XMP Mounting Plate. The top end is the end with the longer (17/8") cutout. 1. With the top end of the MOM2-XMP facing up, place the MOM-2 on the plate with the terminal blocks (TB4/TB2) of the MOM-2 on the right side. TOP OF MOM2-XMP MOM-2 TB4 P4 2. Secure in place with two of the 10-32 screws supplied in the upper and lower threaded holes TB6 of the plate. + - 3. The MOM2-XMP can be installed in any one of the four mounting positions on the CAB-MP, however consideration should be given to wiring requirements. If the terminal blocks of the MOM-2 will be utilized, it is best to place the MOM2-XMP in position 4 of the CAB-MP (See Figure 2). 4. Secure the MOM2-XMP to the CAB-MP with P2 TB2 two of the 10-32 screws in the top threaded posts and two of the 10-32 screws in the bottom threaded posts of the CAB-MP. Figure 1 Mounting The MOM-2 On The MOM2-XMP The MOM2-XMP can be used in CAB1, CAB2, and CAB3 enclosures. MOM2-XMP Mounting Plate: 4.75"W x 17"H Siemens Industry, Inc. Building Technologies Division firealarmresources.com POSITION 1 POSITION 2 POSITION 3 POSITION 4 TOP TOP THREADED POSTS CAB-MP BOTTOM THREADED POSTS POSITION 1 POSITION 2 POSITION 3 POSITION 4 Figure 2 CAB-MP Mounting Positions Siemens Industry, Inc. Building Technologies Division Florham Park, NJ Siemens Building Technologies, Ltd. Fire Safety & Security Products 2 Kenview Boulevard Brampton, Ontario L6T 5E4 Canada firealarmresources.com P/N 315-034822-3