Instruction Manual for LEDYI Lighting models including: RT5, Touch Wheel RF Remote Controller
To fix the remote, three options are offered for selection: Option 1: stuck the remote on any metal surfaces directly. Option 2: fix the remote' back holder ...
Apply to RGB CCT LED controller. Ultra sensitive color adjustment touch wheel. Each remote can match one or more receiver. AAAx2 battery powered. Operate with LED indicator light. Magnet on the back which can be stuck on back holder. User Manual Ver 1.0.7 Technical Parameters Model No.: RT5/RT10 Features Page 1
Touch Wheel RF Remote Controller Model No.: RT5/RT10 1 and 4 zone RGB+CCT/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix Features RT5 1 Zone RGB+CCT RT10 4 Zone RGB+CCT Technical Parameters Apply to RGB+CCT LED controller. Ultra sensitive color adjustment touch wheel. Each remote can match one or more receiver. AAAx2 battery powered. Operate with LED indicator light. Magnet on the back which can be stuck on back holder. LVD RED Input and Output Output signal Working voltage Working current Standby current Standby time Remote distance Environment Operation temperature IP rating RF(2.4GHz) 3VDC(AAAx2) 5mA 10A 1 year 30m(Barrier-free space) Ta: -30 OC ~ +55 OC IP20 Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification Warranty Warranty Weight Net weight Gross weight EN301 489,EN 62479 EN60950 EN300 328 CE,EMC,LVD,RED 5 years 0.048kg 0.088kg Mechanical Structures and Installations 53.00 mm 17.50 mm 122.00 mm 53.50 mm User Manual Ver 1.0.7 3VDC(AAAx2) Battery Back holder with magnet RT5,RT10 Touch Wheel RF Remote Controller To x the remote, three options are offered for selection: Option 1: stuck the remote on any metal surfaces directly. Option 2: fix the remote' back holder on the wall with two screws. Option 3: adhere the remote' back holder to the wall with paster. Operation When turn on light, the indicator display blue. when turn off light, the indicator display red. When touch the color wheel, the indicator will display the same color. When press or touch operation is invalid (If the light is off), the indicator display red. To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state. Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. Use Power Restart Match: Switch off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. .DSwelietcteh: off the power, then switch on power again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. Key function RT5 1 zone RGB+CCT remote CCT RGB R G BW S1 S2 :Turn on/off light. :Touch to change RGB color or color temperature. Press RGB or CCT key to switch between RGB wheel and CCT wheel. : Adjust RGB or color temperature brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment. CCT : Adjust color temperature by WW/CW channel, short press 11 levels, long press adjust WW+CW brightness continuously. 1 Warm White WW 100% CW 0% 6 Natural White WW 100% CW 100% 11 Cool White WW 0% CW 100% Page 1 RGB : Short press get 24 kinds static RGB color. 1 R 100% 5 R 100% G 100% 9 G 100% 17 B 100% 13 G 100% B 100% 21 R 100% B 100% 25(1) R 100% : Short press run next dynamic mode, long press 2s run mode-cycle. : For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get the default speed. For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly, short press 11 levels, long press 1-6s for continuous 256 levels adjustment. R G B : Short press get red, green or blue color directly. long press 1-6s to adjust R/G/B brightness continuously to achieve millions of colors. W : Short press turn on/off white(WW/CW), long press 1-6s to adjust white(WW+CW) brightness continuously, namely change saturation by adding white color slowly. S1 S2 : Short press recall the scene, long press 2s save current color into S1/S2. the LED indicator display green when save OK. RT10 4 zone RGB+CCT remote 1234 CCT RGB S1 S2 Each zone can match single color, dual color(WW/CW), RGB, RGBW, or RGB+CCT(WW/CW) controller or lamp. 1 2 3 4+ : Single color 1 2 3 4 + CCT : Dual color(WW/CW) 1 2 3 4 + RGB : RGB 1 2 3 4+ : RGBW 1 2 3 4+ : RGB+CCT For example, long press 1 + RGB key for 2s will set zone 1 as RGB light type. When remote type change OK, the green indicator go on a long time. : Short press turn on/off all zone light. : Touch to change current zone RGB color or color temperature. Press RGB or CCT key to switch between RGB wheel and CCT wheel. 1 2 3 4 : Short press select and turn on zone light, long press 2s turn off zone light. : Adjust RGB or color temperature brightness, short press 10 levels, long press 2s get min or max brightness. User Manual Ver 1.0.7 RT5,RT10 Touch Wheel RF Remote Controller CCT : For dual color or RGB+CCT(WW/CW), adjust color temperature by WW/CW short press 11 levels, long press adjust WW+CW brightness continuously. channel, 1 Warm White WW 100% CW 0% 6 Natural White WW 100% CW 100% 11 Cool White WW 0% CW 100% For RGB, adjust color temperature by mix R/G/B channel,11 levels. 1 Warm White R 100% G 50% B 0% 6 Natural White R 100% G 100% B 100% 11 Cool White R 0% G 50% B 100% For RGBW, adjust color temperature by adjust W channel brightness,11 levels. 1 W 0% 6 W 50% RGB : Short press get 24 kinds static RGB color. 11 W 100% 1 R 100% 5 R 100% G 100% 9 G 100% 17 B 100% 13 G 100% B 100% 21 R 100% B 100% 25(1) R 100% : Short press run next dynamic mode, long press 2s run mode-cycle. : For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get the default speed. For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly, short press 11 levels, long press 1-6s for continuous 256 levels adjustment. S1 S2 : Short press recall the scene, long press 2s save current state into S1/S2. the LED indicator display green when save OK. 4 zone recall or save synchronously. Safety information 1. Read all instructions carefully before you begin this installation. 2. When installing batter y, pay attention to the batter y positive and negative polarity. A long time without the remote control, remove the batter y. When remote distance becomes smaller and insensitive, replace the batter y. 3. If no response from the receiver, please re-match the remote. 4. Gently handle remote, beware of falling. 5. For indoor and dr y location use only. Page 2Corel PDF Engine Version 16.1.0.843