User Manual for MiBOXER models including: MZ-RGB-REMOTE, 4-Zone RGBW Remote Control, MZ-RGB-REMOTE 4-Zone RGBW Remote Control
RF Touch Color Remote for MiLight/MiBoxer or Waterproof RGB/RGBW Controllers | Super Bright LEDs
23 août 2022 — This manual describes two types of remote controls used for our RGBW product. Both of them have same func ons but different design. Product adopt world-wide ...
Subordinate New Brand 4-Zone RGBW Remote Model No.: MZ-RGB-REMOTE 1. Features This manual describes two types of remote controls used for our RGBW product. Both of them have same funcons but different design. Product adopt world-wide used 2.4GHz frequency, GFSK control method, with the features of low power consumpon, long distance transming, strong an-interference and fast communicaon rate. Adopt high-precision touching IC Touching is more stable and sensive, can control specified Mi-Light / MiBoxer smart light with color, color temperature, saturaon and brightness changing. 2. Products Key Diagram Remark: Hold " " to get white mode. Under white mode, press "S-" to get warm white, press "S+" to get cool white. Under color mode, press "S+/S-" for saturaon control. When press "M", S+/S- can adjust the speed of the dynamic modes. To dim all RGBW lights at once or change the color, frist press "Master ON". to do this with individual lights, frist press "Zone ON". secondly, choose the color or brightness according to the color ring or brightness ring. Master ON Color ring Brightness - Speed Zone ON Zone OFF Master OFF Indicator light Brightness + Speed + Mode(Programs) 4×(un) Link Light 52.5mm MZ-RGB-REMOTE 3. Linking Code / Unlinking Code Instrucons Remark: The light can be working aer linking with the remote. Linking Code Instrucons Power Light Link / Unlink buon Power Light 1 Switch off light, aer 10 seconds then switch on again. 2 Short press " " buon 3 mes within 3 seconds when light on. 3 Lights blink 3 mes slowly means linking is done successfully. Linking failed if light is not blinking slowly, Please follow above steps again. (Note: Light that have linked can't link again) Unlinking Code Instrucons Power Light Link / Unlink buon Power Light 1 Switch off light, aer 10 seconds then switch on again. 2 Short press " " buon 5 mes within 3 seconds when light on. Unlinking must be the same zone with the Linking 3 Lights blink 10 mes quickly means unlinking is done successfully. Unlinking failed if light is not blinking quickly, Please follow above steps again. (Note: Light haven't linked that don't need to unlink) 4. Grouping of several lights You can add an endless numbers of lights to a zone on the 4 channel remote by linking the lights to different zones. This way you are completely flexible in creang different group combinaons. Below you can see some grouping examples. Remark: 1. The user can re-programme freely as needed. One remote can control countless lamps or controllers, but one lamp or controller can only be controlled by four remotes (Max). 2. Please check the baery installaon and controller (totally discharge the power), when you programme aer switching off and switching on. 5. Aenon 1. Using the light/controller in the place with metal or concrete structures or electromagnetic interference will cause issues with communication and communication range. Made in ChinaAdobe PDF library 15.00 Adobe Illustrator CC 22.0 (Windows)