SUNLY Expandable Dish Drying Rack

Assembly Instructions

Tool-free, effortless assembly!

Thank You For Your Purchase!

We're thrilled to welcome this new addition into your home! Designed with care and attention to detail, this product combines functionality with modern lifestyle needs. We hope it serves you well for years to come.

Customer Support

This manual provides an overview of product use and may not cover all details. If you have any questions during assembly or use, feel free to scan the QR code below or email us at support@sunly.life. We'll resolve any issues within 24 hours!

Product Parts List

• Part A-1: Drain Board
• Part A-2: Metal Rack
• Part A-3: Extendable Drainboard
• Part B: Utensil Holder
• Part C: Knife Block
• Part D: Cup Rack

Note: The diagram shows these parts visually.

Product Parts Layout Diagram

This diagram illustrates how the various parts fit together. It shows the main rack structure (Part A, composed of A-1, A-2, A-3) and accessories like the Utensil Holder (B), Knife Block (C), and Cup Rack (D).

Step-by-Step Installation Guide

Note: No tools are needed for assembly.

Step 1: Secure the Metal Rack

Snap all six points of the Metal Rack (Part A-2) into the plastic clips on the Drain Board (Part A-1). A diagram shows the connection points, and a 'TOP VIEW of Part A' illustrates the assembly.

Step 2: Pull Out the Extendable Drainboard

Gently pull out the Extendable Drainboard (Part A-3) from the main rack. Ensure it sits evenly. If not, re-check Step 1.

Step 3: Position the Multifunction Holder

Position the Multifunction Holder by rotating it 90 degrees into place. Apply gentle pressure to avoid damage.

Step 4: Attach the Utensil Holder

Clip the Utensil Holder (Part B) to the Drain Board (Part A). The diagram indicates three possible positions for attachment.

Step 5: Install the Knife Block and Cup Rack

Snap the Knife Block (Part C) onto the Utensil Holder (Part B). Then, firmly attach the Cup Rack (Part D) to the Drain Board (Part A) as depicted in the diagram.

Installation Complete!

Care and Maintenance Guidelines

1. Always place it on a stable, flat surface.
2. Clean with a soft, damp cloth. Avoid harsh chemicals, wire brushes, abrasive sponges, or sharp tools.
3. The weight limit per shelf is 20 kg (44 lbs). Actual capacity may be higher, but avoid excessive force to prevent damage or injury.

If you have any questions or feedback, feel free to reach out via the QR code (mentioned in the manual) or at support@sunly.life. SUNLY values your thoughts and is here to help!