得胜官网-广东得胜
User Manual for TAKSTAR models including: WPM-300, Wireless Monitoring System, WPM-300 Wireless Monitoring System
Download Center - Guangdong Takstar Electronic Co., Ltd.
Amazon.com: TAKSTAR WPM-300 UHF Wireless in-Ear Monitor System 10 Channels & Bodypack Monitoring, 164Ft Transmission Distance in-Earphone Wireless Monitoring System for Stage, Church, Studio, Musicians : Musical Instruments
File Info : application/pdf, 24 Pages, 1.71MB
DocumentDocumentWPM-300 Wireless Monitoring System User's Manual
WPM-300
..........................................................................................2-9
...................................................................................................2 .............................................................................................2 .............................................................................................2 .............................................................................................3 .............................................................................................3
.......................................................................................3 .......................................................................................3 .............................................................................................4 .................................................................................4 .................................................................................5 .............................................................................................6 ..........................................................................................6 ..........................................................................................6 .............................................................................................7 .................................................................................8 .......................................................................................8 .............................................................................................9
1
WPM-300
WPM-300
400 6828 333
· · UHFPLL · · 10 · 50 · · · 3.5mm
2
WPM-300
WPM-300( .................................................................................1 .................................................................................1 ................................................................................................1 SML........................................................................3 5..........................................................................................2 3.5mm.................................................................................1 RCA.......................................................................................1 3.5mm6.3mm........................................................................1 12V/300mA..............................................................................1 .............................................................................................1
520-600MHz
520-600MHz
100mA (TYP)
DC 2.5V (2.2V-3.0V) /AA
DC12V/300mA
115mA(TYP)
50m( ) 20Hz 15 kHz-6dB
5dbm(TYP)
>60dB
159×79.8×21.1mm 8dbuv
123g
>45dB
169×64×30.95mm
123.5g
3
WPM-300
: "|""0" LED"CH01-CH10"10 ø3.5mmRCA SETSET 3.5mm 12V/300mA
4
WPM-300
/ 10"+" "-" 5 SETSET "CH01-CH10"10 1/4
5
WPM-300
1 2"SET" 3"SET"
1. 2.
6
WPM-300
3.LED 4.5 "" 5. 6. 7."SET" 8."-""+"
1 2 3 4 5 6 7
7
WPM-300
RL2004/108/EGEuropean Low Voltage Directive RL2006/95/EG
FCC15 1 2
WEEE(2012/19/EU) WEEE
https://www.takstar.com/
8
WPM-300
9
WPM-300 Wireless Monitoring System
Contents.......................................................................................10-20
Preface.............................................................................................11 Features.............................................................................................11 Applications.......................................................................................11 Package Contents..............................................................................12 Specifications....................................................................................12
Transmitter Specifications...............................................................12 Receiver Specifications.....................................................................12 Function Descriptions........................................................................13 Transmitter....................................................................................13 Bodypack Receiver...........................................................................14 Operation Instructions........................................................................16 Sync Frequency.................................................................................16 Operation Instructions .....................................................................17 Safety Instructions..............................................................................18 Label Meanings.................................................................................19 About This Manual..............................................................................20
10
WPM-300 Wireless Monitoring System
Preface
Dear Customer, Thank you for purchasing Takstar WPM-300 Wireless Monitoring System. In order to better understand and use the product, please read this manual carefully. If you have any questions or suggestions, please contact our local dealer.
Features
· A wireless monitoring system tailored for instrument/stage monitoring and simultaneous interpretation. · UHF wireless transmission, PLL (phase-locked loop) technology, stable and reliable performance. · Anti-interference composite circuit, use multiple bodypack receivers simultaneously. · Supports up to 10 transmitters working at the same time, suitable for multilingual interpretation. · Transmit up to around 50 meters within line of sight. · Dynamic companding circuit with high S/N ratio for clear audio output. · Includes in-ear monitors that are comfortable to wear and offer rich delicate sound and strong bass. · ø3.5mm audio input on transmitter, easier to connect with mixer, amplifier or other audio device.
Applications
Suitable for instrument/stage/conference monitoring, simultaneous interpretation.
11
WPM-300 Wireless Monitoring System
Package Contents
WPM-300 (Set) Transmitter....................................................................................1 pc Bodypack Receiver ........................................................................... 1 pc In-Ear Monitors ..............................................................................1 pr Silicone Ear Tips (S, M, L) ...............................................................3 prs AA Dry Battery.................................................................................2 pcs ø3.5mm Audio Cable........................................................................1 pc RCA Audio Cable..............................................................................1 pc ø3.5mm to 6.3mm Plug.....................................................................1 pc 12V/300mA Adapter...........................................................................1 pc User Manual....................................................................................1 pc
Specifications
Transmitter Specifications
Receiver Specifications
Operating Frequency: 520-600MHz Frequency Range: 520-600MHz
Operating Current: 100mA (TYP) Operating Voltage: DC 2.5V (2.2V-3.0V) /
Power Supply: DC 12V/300mA
two AA batteries
Transmitting distance: 50m
Operating Current: 115mA (TYP)
(line of sight) Frequency Response: 20Hz-15 kHz
Transmitting Power: 5dbm (TYP)
(-6dB intercept point)
Dimensions: 159×79.8×21.1mm S/N Ratio: > 60dB
Weight: approx. 123g
Receiving Sensitivity: better than 8dbuv
Stereo Separation: >45dB
Dimensions: 169×64×30.95mm
Weight: approx. 123.5g
Note: The above data is measured by Takstar laboratory, and Takstar has the final interpretation right!
12
WPM-300 Wireless Monitoring System Function Descriptions
Transmitter: Power Switch: flip to "|" position to power on, or to "0" position to power off the device. LED Screen: displays current working channel, ranging from 10 channels, CH01 to Ch10. Headphone Knob: adjust headphone port output volume. Input Connector: one 3.5mm stereo audio input, for connecting external audio source; one pair of RCA audio inputs, for connecting external audio source. SET Button: press SET to switch frequency, see Sync Frequency section for details.
13
3.5mm Headphone Output: for connecting headphones to monitor audio output. Power Inlet: for connecting power supply via an adapter with a specification of 12V/300mA. Antenna Connector: for connecting external antenna to enhance signal reception.
Bodypack Receiver: Power Button: press and hold for 2s to power on/off. LED Indicator: power indicator, stays green while powered on and battery level is normal, or stays red when battery is low. Volume Control: 10-step volume control; press + to increase volume, or press to decrease. (level-5 by factory default, memorizes last volume setting) SET Button: press SET to switch frequency, see Sync Frequency section for details.
14
WPM-300 Wireless Monitoring System
LED Screen: displays current working channel, ranging from 10 channels, CH01 to Ch10. Displays current battery level in a 3-bar meter. Displays wireless connection status; signal indicator stays on when connected successfully, flickers during weak signal, or turns off when disconnected. External Antenna: 1/4 wavelength antenna to enhance the signal transmission distance. Headphone Jack: used to connect headphones for sound monitoring.
15
WPM-300 Wireless Monitoring System Operation Instructions
Sync Frequency The transmitter and the receiver are already paired before shipping out and will auto connect to each other. Follow below re-pairing or frequency change steps only if there is signal interference. 1. Turn on transmitter and receiver. 2. Press SET on transmitter to change frequency channel. 3. Press SET on receiver to change to the same frequency channel as the transmitter.
16
WPM-300 Wireless Monitoring System
Operation Instructions 1. Connect the transmitter to supplied adapter, plug the adapter into AC mains socket for power supply. 2. Connect the transmitter audio input with audio output device using the adapter cable. 3. Turn on the transmitter power, its LED screen and indicator lights up if working properly. 4. Pinch both the retractable buttons on the battery compartment to take out the battery holder, install 2 pieces of AA batteries, push the battery holder back into the compartment until it clicks into place. 5. Insert the headphone plug into the headphone jack on receiver. 6. Press and hold receiver power button for 2s to power up the receiver, indicated by its lit LED. 7. Press SET button to switch to the same frequency channel as the transmitter's. The receiver screen signal icon will become lit when paired successfully. 8. Press or + button on receiver to adjust volume to a desired level.
17
WPM-300 Wireless Monitoring System
Safety Instructions
To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use: 1. Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to proper level during operation. Do not operate at over-power or high-volume level for extended time to avoid product malfunction or hearing impairment. 2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local dealer for repair. 3. Using battery of broken insulation material is forbidden to avoid short circuit. Do not charge the non-rechargeable battery. 4. Put the waste battery into classification dustbin rather than used as toy by children or discarded directly to avoid potential danger or affecting the environment. 5. Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction. 6. Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident. 7. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.
18
WPM-300 Wireless Monitoring System
Label Meanings
According to the test results obtained based on RL2004/108/EG (Electromagnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive), this product complies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, an integration of relevant laws from its member states.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device.
19
WPM-300 Wireless Monitoring System
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID:WRAWPM-300TX
This symbol indicates that, according to WEEE (Waste of Electrical and Electronic Equipment) Directive (2012/19/EU) and national laws, this type of waste should not be discarded along with your household waste, as it contains potentially hazardous substances that may pose a negative impact on the environment and human health. It should be handed over to an authorized WEEE collection facility for recovery and recycle. Herewith you will be helping effective utilization of natural resources. For more information on disposal of WEEE products, please contact your local municipality, waste management bureau or household waste disposal service.
About This Manual
This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. For the latest version/more information, please visit our website: https://www.takstar.com/. Specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local dealer.
20