Manuals+

Streetwize 9" Wireless Car Screen with Apple CarPlay & Android Auto

Product Code: SWWCP2

Contents

Thank you for choosing the Streetwize 9” Wireless Car Display, Apple CarPlay & Android Auto. This device is designed to enhance your driving experience by providing a seamless integration of your smartphone with your vehicle's infotainment system.

[Image: A 9-inch touchscreen car display with the Streetwize logo visible on the screen.]

Health and Safety Guidelines

Setting Up & Operation - Securing The Screen To Your Dashboard

  1. Clean the surface: Ensure the surface of your dashboard is clean and dry before applying the mount.
  2. Peel the adhesive backing: Remove the protective film from the adhesive base.
  3. Attach the mount: Press the adhesive base firmly onto your dashboard, aligning it with your desired position.
  4. Adjust the arm: Loosen the knob on the arm and position your screen at the optimal angle. Tighten the knob to secure the position.
  5. Place your screen: Insert the base of your screen into the mount's cradle.
  6. Power on: Insert the 12V power adapter into your vehicle's power outlet. Press the power button, located on the right side of the device, until the screen turns on.

[Description of mount: This stand mount has a soft, adhesive base that ensures a firm grip on your dashboard, while the adjustable arm allows you to position your screen at the perfect viewing angle.]

[Images: Two images show the dashboard mount. One is a close-up of the adjustable arm and base, the other shows the mount attached to a dashboard.]

Tips

Rear View Camera Installation

The rear-view camera should be installed at the rear of the car, preferably above the license plate. The camera can be fixed with stickers or screws. (Note: Check if the reversing camera is installed upside down before installing screws.)

The extra RED wire near the rear-view camera is used to sense the reversing state. Connect the RED wire to the positive terminal of the reversing light power supply.

Instructions

  1. Walk the reverse camera cable to the front of the car and connect it to the main unit.
  2. Refer to the diagrams below for wiring methods (A and B).

Wiring Method A (Side routing): Route the cable along the side of the car, following the door frame and under the carpeting.

Wiring Method A (Ceiling routing): Route the cable through the car's ceiling and down the front. Note: You may need to drill holes to pass the cable. Check if the reverse camera cable fits your car before installation.

[Diagrams: Two diagrams show methods of routing the rear camera cable through a car's interior.]

Main Menu

From here you can adjust the sound levels, screen brightness, play multimedia, use the recording function & access the system settings menu.

System Settings Menu

From the main menu press the settings button ⚙️ to access the System Settings Menu to utilise the following functions.

[Figures: Show interface examples for Loop Recording, Car OSD, and Screen Saver settings.]

System Settings Menu (Continued)