Samsung MC28H5125AKEF Microwave Oven - Exploded Views and Parts Identification
View A: Front Panel Assembly
This view illustrates the main front panel and associated components for the microwave oven.
- 1: Main assembly housing.
- 1-1: Front panel assembly, comprising:
- 1-1-1: Outer front panel/casing.
- 1-1-2: Inner frame or chassis for the front panel.
- 1-1-3: Button array or keypad module.
- 1-1-4: Display and control interface component.
- 1-1-5: Door latch mechanism.
- 1-1-6: Housing for internal electronic components.
- 1-2: Rotary knob assembly, including:
- 1-2-1: Knob cap.
- 1-2-2: Rotary encoder or shaft.
- 1-3: Rear mounting plate or panel.
- 1-4: Decorative cover or trim piece.
View B: Main Casing Assembly
This view details the primary casing and internal structural components.
- 1: Main assembly unit.
- 1-1: Shaft or rod component.
- 1-2: Washer or spacer.
- 1-3: Inner casing or frame structure.
- 1-4: Outer casing or main housing.
- 1-5: Fan or impeller component.
- 1-6: Motor mounting bracket.
- 1-7: Electrical terminal block or connector.
- 1-8: Fastener, such as a screw.
View C: Main Microwave Unit and Components
This comprehensive view shows the core microwave oven unit and its major internal and external parts.
- 1: Main microwave unit assembly.
- 1-1: Turntable support ring.
- 1-2: Turntable bearing.
- 1-3: Heating elements, likely for grilling function.
- 1-4: Mounting bracket for heating elements.
- 1-5: Securing bracket for heating elements.
- 2: Outer cabinet or main housing of the microwave.
- 3: Various fasteners, such as screws.
- 4: Door hinge assembly, consisting of:
- 4-1: Hinge arm.
- 4-2: Hinge mounting bracket.
- 4-3: Hinge pin.
- 5: Cooling fan assembly, including:
- 5-1: Fan motor.
- 5-2: Fan blade.
- 5-3: Fan shroud or housing.
- 5-4: Fan motor connector.
- 7: Microwave cavity or chamber.
- 7-1: Mounting points for the microwave cavity.
- 8: Housing for the main control panel.
- 9: Power supply cord.
- 10: Power transformer.
- 11: Door assembly (external view).
- 12: Wiring harness or set of cables.
- 13: Power supply or inverter board assembly, featuring:
- 13-1: Main control board.
- 13-1-1: Integrated control circuit.
- 13-1-2: Capacitors.
- 13-1-3: Resistors.
- 13-2: Power conversion module.
- 13-3: Protective housing for the power board.
- 14: Grounding strap or wire.
- 16: Door interlock switch assembly.
- 17: Magnetron, the component that generates microwaves.
- 18: High voltage capacitor.
- 19: Door handle.
- 21: Motor for the turntable rotation.
- 22: Mounting bracket for the turntable motor.
- 23: Strain relief for the power cord.
- 24: Screws for attaching the outer casing.
- 25: Electrical terminal connector.
- 26: General fastener.
- 27: General fastener.
- 6-1, 6-2: Components related to ventilation or structural mounting.
View D: Door Assembly Details
This view focuses on the microwave oven door and its constituent parts.
- 1: Complete door assembly.
- 1-1: Inner door frame structure.
- 1-2: Door panel assembly, including:
- 1-2-1: Door handle mechanism.
- 1-2-2: Latch receiver component on the door.
- 1-2-3: Door seal or gasket.
- 1-2-4: Attachment point for the door hinge.
- 1-2-5: Actuator for the door interlock switches.
- 1-3: Outer door panel or cover.