Niko Home Control Double Motor Switch with LED, Champagne Coated

This push-button allows for the control of two groups of roller shutters, blinds, or curtains. It is mounted onto a wall plate using a click mechanism. An LED indicates the position of the roller shutter, blind, or curtain. Mechanism with a button. Finish color: champagne coated.

Warranty: 4 years

Technical Data

Double motor switch with LED for Niko Home Control, champagne coated finish.

Function

• The push-buttons for motor control are available in a single-row configuration (three push-buttons) or a double-row configuration (six push-buttons). They enable the resident to operate the motors of one or two groups of roller shutters, blinds, or awnings integrated into the Niko Home Control installation.
• The specific push-buttons for each push-button are arranged in groups of three.
• To mount the push-button, press the unit onto a Niko Home Control wall plate until it clicks into place. The push-button is now secured. The functions of the push-buttons can be assigned during the installation programming by associating each function with the unique address of each push-button during the addressing phase. This information is then stored in the control unit.

Material

• Cover plate material: The cover plate is made of weather-resistant polycarbonate + ASA and is lacquered.
• Engraving: Arrows indicating that the roller shutter or blinds are raised or lowered are engraved on the top and bottom buttons. A roller shutter is engraved on the central button(s) to indicate your favorite setting. Pressing this button will automatically position the roller shutter or blinds to the preset position.
• Lens: The top and bottom buttons are equipped with an amber indicator LED (1.5 x 1.5 mm) that indicates the status of the action. The LEDs can be programmed to light up when the output is activated or deactivated. This is done within the programming software.
• Color: lacquered champagne (approximately NCS S 4005 - Y20R, RAL 080 70 10)

Fire Safety

• The plastic parts of the cover plate are self-extinguishing (meet a glow-wire test of 650 °C).
• The plastic parts of the cover plate are halogen-free.

Technical Specifications

• Supply voltage: 26 Vdc (SELV, safety extra-low voltage)
• Disassembly: Disassembly is simple by detaching the cover plate from the base.
• Impact resistance: After mounting, IK06 impact protection is guaranteed.
• Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
• Marking: CE