User Guide for motionics models including: BDLT-302 Bluetooth Dial Indicator Lite, BDLT-302, Bluetooth Dial Indicator Lite, Dial Indicator Lite, Indicator Lite

110618UserManualsOnline

BDLT-302

Download – Motionics LLC

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 178.02KB

Bluetooth Dial Indicator Lite BDLT-302 User Guide
! Important Notes
Turn off the device after use. It will NOT turn off automatically. Do NOT open the device. Opening causes permanent damage and voids the warranty. BlueDial-LT transmitter & digital indicator should be both on before pairing. BlueDial-LT operates on two separate batteries: 1) Rechargeable built-in Li-Po battery for the Bluetooth transmitter 2) CR2032 battery for the digital dial The indicator face is not rotatable. Avoid rotating the dial face.

Description
1 Dial On/Off ­ press to turn dial on/off 2 Origin Button ­ press to zero dial reading; this can also be done in the App 3 Unit Button ­ select reading in inch/mm 4 Zero/ABS Button ­ change absolute/increment mode for the dial 5 Preset Button ­ preset dial data 6 Tol Button ­ make the dial work in tolerance mode 7 Direction Button ­ change measurement direction 8 Dial Battery ­ insert coin battery CR2032 for the digital dial 9 BLE On/Off ­ press to turn Bluetooth transmitter on/off 10 Status LED
­ Bluetooth transmitter is on ­ BlueDial-LT is in charge ­ BlueDial-LT is fully charged 11 Micro USB Port ­ connect to USB cable to charge BlueDial-LT

6
5 4
3

7

9

10
8

11
1
2

Included in the box
BDLT-302 1X USB Charging Cable 1X USB Power Adapter 1X User Guide 1X
Compatible Software
iOS: DialRead, DialReadPad, MultiGage Reader Android: DialReading Windows: Dial-Reading (BLE Dongle Required) iOS App can be directly downloaded from the App Store for FREE. Android App can be directly downloaded from the Google Play Store for FREE. Windows software is available on Motionics website.
Quick Start
Turn on BlueDial-LT (Make sure both dial and BLE transmitter are on). Plug in USB Bluetooth dongle if using Windows PC. In the App/software, search for nearby devices and connect to BlueDialLTXXX. Once paired, BlueDial-LT reading will be updated in the App/software and available for data collection.

Motionics, LLC

www.motionics.com

8500 Shoal Creek Blvd Building 4 Suite 209, Austin, TX, 78757

© 2018 Motionics, LLC.

All rights reserved.

info@motionics.com Made in the U.S.A



References

• Home - Motionics LLC