AMC MCR 4EN Metal Ceiling Loudspeakers
Model: MCR 4EN
Brand: AMC
Document Reference: AMC 2014-001 Revision 2025-08-05
Certifications: EN54-24:2008, 1438-CPR-1120, Type A
Issue Date: 2025-06-18
Installation Guide
- Cut a 155 mm diameter hole in the ceiling.
- Unscrew the bolt and remove the dome.
- Choose a cable entry. Make a small hole using an awl in the rubber seal and pass the cable through it.
- Select the desired power tap (6W, 3W, or 1.5W) to set the required power output. Connect the cable to the ceramic terminal and set the power output on the line transformer.
- Place the dome back onto the loudspeaker and secure it with the screw.
- Lift all speaker's mounting clamps.
- Carefully push the loudspeaker into the hole until the springs fix it.
Important Note: Mount the loudspeaker on a reliable base only.
Circuit Diagram Description
The MCR 4EN circuit diagram shows connections for a thermal fuse, selectable power taps (6W, 3W, 1.5W), and a common (COM) terminal. These are connected to the loudspeaker enclosure via a line transformer.
Manufacturer Information
Company: AMC Baltic
Address: Neries krantinė 14A, LT-48397 Kaunas, Lithuania
Contact: Phone +370 37 308585, 308584 | E-mail: info@amcpro.eu
Website: www.amcpro.eu
Compliance Mark: CE 15