IKEA Ironing Board Assembly Instructions
Important Information
❗ IMPORTANT! SAVE FOR FUTURE USE. READ CAREFULLY.
This initial section, presented in multiple languages, emphasizes the critical need to retain these instructions for future reference and to read them thoroughly before use.
Safety Warnings
General Safety
⚠️ WARNING! Do not use if any part is broken, torn or missing.
This essential safety notice, echoed across various languages, advises against operating the product if any components are damaged, torn, or absent.
Steam Generator Compatibility
⚠️ WARNING! This ironing board must not be used with a steam generator.
A crucial safety directive, present in multiple languages, explicitly prohibits the use of this ironing board in conjunction with a steam generator unit.
Child Safety
⚠️ WARNING! Keep out of reach of children.
This safety instruction, translated into numerous languages, directs users to store the product in a location that is inaccessible to children.
Tipping Hazard
⚠️ WARNING! Tipping hazard. If used with an iron, the steam generator must not be placed on the ironing board.
This warning highlights the potential risk of the product tipping over. It specifically advises that when using an iron, the steam generator should not be placed directly on the ironing board.
Product Specifications & Assembly
Weight Limits
- Maximum Load: 5 kg (11 lb)
- Maximum Load for Steam Generator: 3 kg (6 lb)
These weight limitations are indicated visually in the assembly diagrams.
Parts List (based on diagrams)
- Part 1: (Quantity: 4) - Appears to be main frame or leg components.
- Part 2: (Quantity: 1) - Likely a support or connecting piece.
- Part 3: (Quantity: 1) - Likely a hinge or connecting piece.
- Part 4: (Quantity: 1) - Likely a hinge or connecting piece.
- Part 10: (Quantity: 1) - Likely a support or connecting piece.
- Part 11: (Quantity: 1) - Likely a locking or stabilizing mechanism.
- Part 13: (Quantity: 1) - Likely a main leg or support.
- Part 14: (Quantity: 1) - Likely a base or connecting frame.
Note: Part identification and quantities are derived from the visual cues in the provided diagrams.
Assembly Steps (described from diagrams)
- Begin by attaching the four (4) units of Part 1 to the main frame structure.
- Connect Part 13 to Part 2.
- Connect Part 3 to Part 10.
- Attach Part 11 to the structure.
- Connect Part 2 to Part 13, likely forming a leg assembly.
- Attach Part 3 and Part 4 to Part 14, forming a base or connecting frame.
- The final diagram (Page 15) illustrates the fully assembled ironing board.
The assembly process involves connecting various components as depicted in the diagrams to construct the complete ironing board.
